Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Increasing the efficiency of the catalytic converter

View through CrossRef
The article deals with the efficiency of the catalytic converter of automobiles in operation with the aim of solving the problem of reducing the pollution of the atmospheric air by the exhaust gases of automobiles. The problem of reducing emissions of harmful substances of vehicles is considered to be one of the main. The article presents calculations of the efficiency of the neutralizer at various operating conditions of the internal combustion engine, and factors influencing the process of oxidation-reduction reactions are determined. It is shown that a small amount of oxygen (О2) to the neutralizer limits the oxidation processes and does not give a good reduction efficiency for CO and CH. At an О2 concentration of 1.7 to 0.75% up to the neutralizer, the efficiency of the oxidation reactions in the neutralizer is maximal. The main requirements for the process of catalyzing harmful emissions and the disadvantages of modern neutralizers are considered. The main contribution to emissions of CO and CH is made by the modes of starting and warming up of engine. This is especially felt in the cycle of "cold tests" of the automobile under the UN Rules No. 83-06. Emissions of hydrocarbons increase proportionally with a decrease in engine temperature. In this regard, new types of neutralizers are provided to ensure the achievement of catalytic reactor activity at a lower temperature than those currently used on automobiles, as well as on-board vehicle diagnostic systems that support the environmental characteristics of vehicles in operation. The reasons for the "aging" of the neutralizer during its operation, the methods for diagnosing the neutralizer for the purpose of assessing its technical condition and on-board monitoring systems are analyzed. The urgency of the task of improving the design of the automobile in terms of limiting toxicity and the system of technical control in operation was noted. Improvement of the environmental control of vehicles is primarily related to the operability of on-board diagnostic systems of the car in operation and the catalytic neutralization system. The normative base of the Russian Federation and the EU in the field of environmental control of motor vehicles in operation is given.
Title: Increasing the efficiency of the catalytic converter
Description:
The article deals with the efficiency of the catalytic converter of automobiles in operation with the aim of solving the problem of reducing the pollution of the atmospheric air by the exhaust gases of automobiles.
The problem of reducing emissions of harmful substances of vehicles is considered to be one of the main.
The article presents calculations of the efficiency of the neutralizer at various operating conditions of the internal combustion engine, and factors influencing the process of oxidation-reduction reactions are determined.
It is shown that a small amount of oxygen (О2) to the neutralizer limits the oxidation processes and does not give a good reduction efficiency for CO and CH.
At an О2 concentration of 1.
7 to 0.
75% up to the neutralizer, the efficiency of the oxidation reactions in the neutralizer is maximal.
The main requirements for the process of catalyzing harmful emissions and the disadvantages of modern neutralizers are considered.
The main contribution to emissions of CO and CH is made by the modes of starting and warming up of engine.
This is especially felt in the cycle of "cold tests" of the automobile under the UN Rules No.
83-06.
Emissions of hydrocarbons increase proportionally with a decrease in engine temperature.
In this regard, new types of neutralizers are provided to ensure the achievement of catalytic reactor activity at a lower temperature than those currently used on automobiles, as well as on-board vehicle diagnostic systems that support the environmental characteristics of vehicles in operation.
The reasons for the "aging" of the neutralizer during its operation, the methods for diagnosing the neutralizer for the purpose of assessing its technical condition and on-board monitoring systems are analyzed.
The urgency of the task of improving the design of the automobile in terms of limiting toxicity and the system of technical control in operation was noted.
Improvement of the environmental control of vehicles is primarily related to the operability of on-board diagnostic systems of the car in operation and the catalytic neutralization system.
The normative base of the Russian Federation and the EU in the field of environmental control of motor vehicles in operation is given.

Related Results

Katalis Plat Kuningan Berbentuk Sarang Lebah untuk Mengurangi Emisi Kendaraan Bermotor
Katalis Plat Kuningan Berbentuk Sarang Lebah untuk Mengurangi Emisi Kendaraan Bermotor
Meningkatnya jumlah kendaraan bermotor berdampak langsung terhadap pencemaran udara akibat gas buang. Pencemaran udara di perkotaan didominasi oleh emisi kendaraan bermotor, disert...
Design, Development and Analysis of Mullite Catalytic Converter for CI Engines
Design, Development and Analysis of Mullite Catalytic Converter for CI Engines
<div class="section abstract"><div class="htmlview paragraph">Emissions of Hydrocarbon (HC), Carbon Monoxide (CO) and Oxides of Nitrogen (NOx) are the largest concerns ...
Design and Simulation Converter with Buck-boost Converter as The Voltage Stabilizer
Design and Simulation Converter with Buck-boost Converter as The Voltage Stabilizer
Buck-boost Converter is the device with the function to convert DC Voltage input to the setpoint DC Voltage output. Buck-boost converter can be used for regulating unstable voltage...
A Single‐Stage Isolated Battery Charger Using Nonbridged Positive Cuk Converter Configuration
A Single‐Stage Isolated Battery Charger Using Nonbridged Positive Cuk Converter Configuration
This article presents a nonbridged isolated positive Cuk (NB‐IPCuk) converter‐based single‐stage battery charging system (SSBCS). The architecture of the suggested charger ensures ...
Computer Application in Converter Development from Concept to Manufacturing
Computer Application in Converter Development from Concept to Manufacturing
<div class="htmlview paragraph">Conventional catalytic converter developments driven by trial and error attempts by experts who successfully employ heuristics (a set of empir...
Research and Implementation of Single Switch Voltage Clamped Hybrid DC-DC Converter
Research and Implementation of Single Switch Voltage Clamped Hybrid DC-DC Converter
Recently, micro-inverter has received great attention due to its excellent performance under local shade condition. However, this kind of inverter needs large DC-DC voltage gain to...
Simulation of Extended Range Hybrid Type Full Bridge DC-DC Converter with Closed Loop Control
Simulation of Extended Range Hybrid Type Full Bridge DC-DC Converter with Closed Loop Control
This paper presents a hybrid-type Z-Source fullbattery or external supply (sometimes higher or lower than the bridge dc/dc converter with high efficiency. Using a hybrid supply vol...
Design of Buck Converter Based on Maximum Power Point Tracking for Photovoltaic Applications
Design of Buck Converter Based on Maximum Power Point Tracking for Photovoltaic Applications
e MPPT converter ensures that the PV system operates at the maximum power point, which is the point where the solar panels can generate the most power. This is done by adjusting th...

Back to Top