Javascript must be enabled to continue!
Heat and Mass Transfer in Unsteady Boundary Layer Flow of Williamson Nanofluids
View through CrossRef
In this paper, analytic approximation to the heat and mass transfer characteristics of a two-dimensional time-dependent flow of Williamson nanofluids over a permeable stretching sheet embedded in a porous medium has been presented by considering the effects of magnetic field, thermal radiation, and chemical reaction. The governing partial differential equations along with the boundary conditions were reduced to dimensionless forms by using suitable similarity transformation. The resulting system of ordinary differential equations with the corresponding boundary conditions was solved via the homotopy analysis method. The results of the study show that velocity, temperature, and concentration boundary layer thicknesses generally decrease as we move away from the surface of the stretching sheet and the Williamson parameter was found to retard the velocity but it enhances the temperature and concentration profiles near the surface. It was also found that increasing magnetic field strength, thermal radiation, or rate of chemical reaction speeds up the mass transfer but slows down the heat transfer rates in the boundary layer. The results of this study were compared with some previously published works under some restrictions, and they are found in excellent agreement.
Title: Heat and Mass Transfer in Unsteady Boundary Layer Flow of Williamson Nanofluids
Description:
In this paper, analytic approximation to the heat and mass transfer characteristics of a two-dimensional time-dependent flow of Williamson nanofluids over a permeable stretching sheet embedded in a porous medium has been presented by considering the effects of magnetic field, thermal radiation, and chemical reaction.
The governing partial differential equations along with the boundary conditions were reduced to dimensionless forms by using suitable similarity transformation.
The resulting system of ordinary differential equations with the corresponding boundary conditions was solved via the homotopy analysis method.
The results of the study show that velocity, temperature, and concentration boundary layer thicknesses generally decrease as we move away from the surface of the stretching sheet and the Williamson parameter was found to retard the velocity but it enhances the temperature and concentration profiles near the surface.
It was also found that increasing magnetic field strength, thermal radiation, or rate of chemical reaction speeds up the mass transfer but slows down the heat transfer rates in the boundary layer.
The results of this study were compared with some previously published works under some restrictions, and they are found in excellent agreement.
Related Results
Effect of ocean heat flux on Titan's topography and tectonic stresses
Effect of ocean heat flux on Titan's topography and tectonic stresses
INTRODUCTIONThe thermo-mechanical evolution of Titan's ice shell is primarily controlled by the mode of the heat transfer in the ice shell and the amount of heat coming from the oc...
Experimental Study on Heat Transfer Improvement in a Circular Passage Using Metal Oxide and Ethylene Glycol Based Well Stable Nanofluids
Experimental Study on Heat Transfer Improvement in a Circular Passage Using Metal Oxide and Ethylene Glycol Based Well Stable Nanofluids
Zinc Oxide @ Glycol based nanofluids was prepared using the ultra-sonochemical technique and 2 step methods. The heat convection characteristics of as prepared nanofluids were obse...
The Characteristics of Hybrid Al2O3:SiO2 Nanofluids in Cooling Plate of PEMFC
The Characteristics of Hybrid Al2O3:SiO2 Nanofluids in Cooling Plate of PEMFC
A Proton Electrolyte Membrane fuel cells (PEMFC) is considered to be a viable alternatives to Internal Combustion Engines (ICEs) in automotive applications due to the key advantage...
Green Engineering with Nanofluids: Elevating Energy Efficiency and Sustainability
Green Engineering with Nanofluids: Elevating Energy Efficiency and Sustainability
Colloidal suspensions of nanoparticles in a base fluid, known as nanofluids, have gained attention as a promising green technology with a lot of promise to address issues with sust...
Numerical Evaluation of Clearance Requirements Around Obstructions in Finned Heat Sinks
Numerical Evaluation of Clearance Requirements Around Obstructions in Finned Heat Sinks
This study uses CFD to consider the effects of obstructions (bosses) on the fluid flow and heat transfer in finned heat sinks used for cooling electronic components. In particular,...
A comprehensive review of recent progress of nanofluid in engineering application: Microchannel heat sink (MCHS)
A comprehensive review of recent progress of nanofluid in engineering application: Microchannel heat sink (MCHS)
Nanofluid is a new class of heat transfer fluid that is introduced to enhance the heat transfer performance in various heat exchanging systems. Prior to invention of nanofluid, wat...
Thermal Boundary Layer Response to Periodic Fluctuations
Thermal Boundary Layer Response to Periodic Fluctuations
Unsteady effects impact the aerothermal performance of the turbine blade rows, originating noise, mechanical and thermal fatigue. Blade row interactions are due to the relative mot...
The vertical distribution of PM2.5 and boundary-layer structure during winter haze in Nanjing
The vertical distribution of PM2.5 and boundary-layer structure during winter haze in Nanjing
<p>At the end of November 2018, a heavy air pollution event was recorded by many meteorological stations in the Yangtze River Delta (YRD), China. The local PM2.5 conc...

