Javascript must be enabled to continue!
Ultrathin Rare-Earth-Doped MoS2 Crystalline Films Prepared with Magnetron Sputtering and Ar + H2 Post-Annealing
View through CrossRef
In this work, we propose a method to prepare large-area, crystalline ultrathin rare-earth (RE, i.e., Eu, Yb, Er and Tb)-doped MoS2 thin films, using magnetron sputtering and subsequent Ar + H2 annealing. The film thickness of as-deposited samples varied from 60 to 100 nm, and decreases to be below 10 nm after annealing at 550 °C for 30 min. X-ray diffraction and Raman spectra analysis revealed that the sample films were crystallized after the annealing, which resulted in a MoS2 crystallite size of about 4–5 nm. X-ray photoelectron spectroscopy indicated that most of the RE ions existed in the films in trivalent states. The optical bandgap of the RE-doped MoS2 samples decreased from 1.6 eV (undoped) to 1.3 eV (Eu-doped) in the UV-vis absorption spectra. Electrical measurements showed that the electrical resistance decreased from 9.13 MΩ (undoped) to 0.34 MΩ (Yb-doped), the carrier density increased by one to two orders of magnitude and the carrier mobility decreased from 5.4 cm2/V·s (undoped) to 0.65 cm2/V·s (Yb-doped). The sign of the Hall coefficients indicated that the undoped MoS2 and the Yb-, Tb- and Er-doped MoS2 samples were n-type semiconductors, while the Eu-doped sample showed p-type characteristics. This study may be helpful to broaden the photoelectronic applications of these two-dimensional materials.
Title: Ultrathin Rare-Earth-Doped MoS2 Crystalline Films Prepared with Magnetron Sputtering and Ar + H2 Post-Annealing
Description:
In this work, we propose a method to prepare large-area, crystalline ultrathin rare-earth (RE, i.
e.
, Eu, Yb, Er and Tb)-doped MoS2 thin films, using magnetron sputtering and subsequent Ar + H2 annealing.
The film thickness of as-deposited samples varied from 60 to 100 nm, and decreases to be below 10 nm after annealing at 550 °C for 30 min.
X-ray diffraction and Raman spectra analysis revealed that the sample films were crystallized after the annealing, which resulted in a MoS2 crystallite size of about 4–5 nm.
X-ray photoelectron spectroscopy indicated that most of the RE ions existed in the films in trivalent states.
The optical bandgap of the RE-doped MoS2 samples decreased from 1.
6 eV (undoped) to 1.
3 eV (Eu-doped) in the UV-vis absorption spectra.
Electrical measurements showed that the electrical resistance decreased from 9.
13 MΩ (undoped) to 0.
34 MΩ (Yb-doped), the carrier density increased by one to two orders of magnitude and the carrier mobility decreased from 5.
4 cm2/V·s (undoped) to 0.
65 cm2/V·s (Yb-doped).
The sign of the Hall coefficients indicated that the undoped MoS2 and the Yb-, Tb- and Er-doped MoS2 samples were n-type semiconductors, while the Eu-doped sample showed p-type characteristics.
This study may be helpful to broaden the photoelectronic applications of these two-dimensional materials.
Related Results
Development of the Electrode for All-Solid-State Lithium Rechargeable Batteries Using MoS2 by Liquid Phase Mixing
Development of the Electrode for All-Solid-State Lithium Rechargeable Batteries Using MoS2 by Liquid Phase Mixing
1.
Purpose
Rechargeable batteries using inorganic solid electrolytes are currently attracting attention from many quarters as next...
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Phillip Noyce is one of Australia’s most prominent film makers—a successful feature film director with both iconic Australian narratives and many a Hollywood blockbuster under his ...
MoS2/Montmorillonite Nanocomposite: Preparation, Tribological Properties, and Inner Synergistic Lubrication
MoS2/Montmorillonite Nanocomposite: Preparation, Tribological Properties, and Inner Synergistic Lubrication
A nano-MoS2/montmorillonite K-10 (K10) composite was prepared and characterized. The composite contains two types of 2H-MoS2 nanoparticles. One is the hollow spherical MoS2 with a ...
Study of In2O3 and ZnO thin films for selective gas sensors applications
Study of In2O3 and ZnO thin films for selective gas sensors applications
The goal of this thesis is the study In2O3 and ZnO thin films for selective gas sensors applications with focus on growth effect on the films structure and surface topology as esse...
Large-area sputtered 2H-MoS2 thin films for spin and orbital charge conversion
Large-area sputtered 2H-MoS2 thin films for spin and orbital charge conversion
Abstract
We report the growth and characterization of large-area molybdenum disulfide (MoS2) thin films synthesized by RF magnetron sputtering followed by in situ high-vacu...
The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrates
The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrates
The bonded MoS2 films is widely used as solid lubricants in aerospace mechanisms due to their excellent tribological properties. Traditionally, the MoS2 was directly bonded on the ...
Low voltage resistance switching characteristics of Cu/MoS2/Cu/ITO devices
Low voltage resistance switching characteristics of Cu/MoS2/Cu/ITO devices
The resistive switching behavior is observed in the Cu/MoS2/Cu/ITO structures, which has been deposited by magnetron sputtering. With the increase in MoS2 thickness, the resistive ...
Analysis of Electrocatalytic Performance of Nanostructured MoS2 in
Hydrogen Evolution Reaction
Analysis of Electrocatalytic Performance of Nanostructured MoS2 in
Hydrogen Evolution Reaction
Abstract:
Recently, renewable and non-conventional energy production methods have been getting
widespread attention. Fast research progress in establishing green energy indicates ...

