Javascript must be enabled to continue!
(Invited) On Degradation Mechanisms of Ni-YSZ Fuel Electrodes in Solid Oxide Cells
View through CrossRef
This is a continuation of a series of articles by the principal author on degradation of Ni-YSZ cermet electrodes. This one gives a brief listing of the main aspects and in particular of the disagreements in literature on the long term degradation mechanisms of Ni-YSZ electrodes at high current density. Two main hypotheses are presented, and the weaknesses and strengths are briefly discussed. Recommendations for alleviation of the degradation are given as well as for needed experiments in the future.
Title: (Invited) On Degradation Mechanisms of Ni-YSZ Fuel Electrodes in Solid Oxide Cells
Description:
This is a continuation of a series of articles by the principal author on degradation of Ni-YSZ cermet electrodes.
This one gives a brief listing of the main aspects and in particular of the disagreements in literature on the long term degradation mechanisms of Ni-YSZ electrodes at high current density.
Two main hypotheses are presented, and the weaknesses and strengths are briefly discussed.
Recommendations for alleviation of the degradation are given as well as for needed experiments in the future.
Related Results
(Invited) On Degradation Mechanisms of Ni-YSZ Fuel Electrodes in Solid Oxide Cells
(Invited) On Degradation Mechanisms of Ni-YSZ Fuel Electrodes in Solid Oxide Cells
The solid oxide cell (SOC) is reversible. It has about equally good performance both in solid oxide fuel cell (SOFC) and in solid oxide electrolyzer cell (SOEC) mode. The classical...
Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament
Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament
Commercial wet Silver and Silver Chloride electrodes are used to monitor electrocardiogram (ECG) signals in numerous bioimpedance applications. These electrodes are frequently sing...
Thermal Stability of Plasma-Sprayed Thick Thermal Barrier Coatings Using Triplex ProTM-200 Torch
Thermal Stability of Plasma-Sprayed Thick Thermal Barrier Coatings Using Triplex ProTM-200 Torch
Segmentation-crack structured yttria-stabilized zirconia (YSZ) thermal barrier coatings (TBCs) were deposited by atmospheric plasma spraying (APS) using a Triplex Pro™-200 gun. In ...
Analisis Perbandingan Fuel Consumtption Pada Pesawat boeing B737-800 Rute CGK-DMK dan CGK-AMQ
Analisis Perbandingan Fuel Consumtption Pada Pesawat boeing B737-800 Rute CGK-DMK dan CGK-AMQ
Fuel consumption merupakan perhitungan konsumsi bahan bakaryang digunakan pesawat udara melalui dua engine, perhitungan ini akan mengetahui banyaknya fuel yang digunakan oleh pesaw...
(Invited) Gradient Ni-SDC Anode By Reactive Co-Sputtering for Low Temperature Solid Oxide Fuel Cells
(Invited) Gradient Ni-SDC Anode By Reactive Co-Sputtering for Low Temperature Solid Oxide Fuel Cells
Solid oxide fuel cells (SOFCs) are attracting attention as next-generation energy conversion devices due to their high efficiency, eco-friendliness, and scalability. However, the h...
Selective Electrodes for Mixed Reactant Fuel Cells
Selective Electrodes for Mixed Reactant Fuel Cells
Objectives
We examine the option to operate fuel cells, in particular solid oxide fuel cells (SOFCs), on a mixture of fuel with air and apply the sam...
The Adventitious-Pin-Failure Study Under a Slow Power Ramp
The Adventitious-Pin-Failure Study Under a Slow Power Ramp
In a fast breeder reactor, a slow power ramp accident could lead to a local melting of the fuel depending on design and assumptions. If we assume cladding failure in addition to th...
Spatial variation and determinants of solid fuel use in Ethiopia; Mixed effect and spatial analysis using 2019 Ethiopia Mini Demographic and Health Survey dataset
Spatial variation and determinants of solid fuel use in Ethiopia; Mixed effect and spatial analysis using 2019 Ethiopia Mini Demographic and Health Survey dataset
Background
According to UNSD, World Bank, and WHO, a 2020 joint report, 3 billion people who used solid fuel were found in low and middle-income countries. The burning of such type...

