Effect of Superheat on Microstructure and Mechanical Properties of Al-7Si-2Fe Alloy

AbstractRecycling of aluminum (Al) alloys is critical to meet the demands of global net zero emission targets. The major challenge in the recycling of Al alloys is the presence of a higher content of iron as an impurity in Al alloy scraps, which deteriorates the mechanical properties of recycled alloys. In the present work, Al-7%Si alloys and Al-7%Si-2Fe alloys were cast at three different superheat temperatures to study the effect of superheat on the formation of iron intermetallic particles in these alloys. Microstructure–mechanical properties correlations were carried out using SEM-EDS and tensile testing of the alloys. 3D x-ray computed tomography (XCT) results show that the β-phase intermetallic particles were observed to be large and platelet-shaped in the Al-7Si-2Fe alloy cast at 700°C, while these particles appeared to be finer and uniformly distributed throughout the sample in the alloy cast at 900°C. XCT results show the presence of large shrinkage porosity in the Al-7Si-2Fe alloy cast at 700°C, due to the presence of large intermetallic particles which hinder the flow of molten metal during solidification of the alloys. Tensile test results show that the addition of 2% iron resulted in a significant reduction in the elongation of the alloy at all superheat temperatures.