Javascript must be enabled to continue!
Geochemical Characteristics and Origin of Formation Water From the Upper Triassic Xujiahe Tight Sandstone in the Xiaoquan-Fenggu Structural Belt, Western Sichuan Depression, China
View through CrossRef
Formation water represents an important driving force and carrier for the migration and accumulation of oil and gas; thus, research on its origin is a hot spot in petroleum geology. The Upper Triassic Xujiahe Formation in the Xiaoquan-Fenggu Structural Belt in the western Sichuan Depression, China, has developed thick tight sandstone gas reservoirs. However, previous studies have provided different conclusions on the origin of the formation water in the Xujiahe tight sandstone reservoir. In this paper, the origin of the formation water in the Xujiahe Formation was determined based on the latest major and minor elemental concentration data, hydrogen and oxygen isotopes data of formation water, and carbon and oxygen isotope data of carbonate cements. The results show that the salinity of the formation water of the Xujiahe Formation in the study area is generally greater than 50 g/L. The water type is mainly the CaCl2 type, although a small proportion of NaHCO3 type water with high salinity is observed, which is related to hydrocarbon expulsion by overpressure. Moreover, the formation water in the sandstone of the Xujiahe Formation is obviously rich in Br, which is related to membrane infiltration, overpressured hydrocarbon expulsion of shale and diagenesis of organic matter. The composition of Cl− and Na+ ions in the formation water in the Xujiahe tight sandstone reservoir is consistent with the seawater evaporation curve, which deviates significantly from the freshwater evaporation curve. The hydrogen and oxygen isotopes of condensate water in the Xujiahe Formation tight sandstone are similar to those of atmospheric precipitation water, while the hydrogen and oxygen isotopes of the formation water in the Xujiahe Formation show that it is of seawater origin. Therefore, to use hydrogen and oxygen isotopes to determine the origin of formation water, condensate water must be accurately differentiated from formation water. Otherwise, if the condensate water is misjudged as formation water, then incorrect conclusions will be drawn, e.g., that the formation water of the Xujiahe Formation originated from fresh water. Affected by organic carbon, the carbon isotope Z value of the carbonate cements in the Xujiahe Formation is low (mainly distributed between 110 and 130). A Z value of less than 120 does not indicate that the ancient water bodies formed by cements were fresh water or mixed water bodies. However, Z values greater than 120 correspond to a formation temperature lower than 80 C, which indicates that carbonate cement was not affected by organic carbon; thus, the Z value can reflect the origin of ancient water bodies. The results of this study indicate that the formation water of the Xujiahe tight sandstone in the study area is of seawater origin. The determination of the origin of the formation water and seawater of the Xujiahe Formation provides strong evidence for the determination of the marine sedimentary environment of the Xujiahe Formation in the study area, and can provide scientific guidance for the search for high-quality reservoirs.
Frontiers Media SA
Title: Geochemical Characteristics and Origin of Formation Water From the Upper Triassic Xujiahe Tight Sandstone in the Xiaoquan-Fenggu Structural Belt, Western Sichuan Depression, China
Description:
Formation water represents an important driving force and carrier for the migration and accumulation of oil and gas; thus, research on its origin is a hot spot in petroleum geology.
The Upper Triassic Xujiahe Formation in the Xiaoquan-Fenggu Structural Belt in the western Sichuan Depression, China, has developed thick tight sandstone gas reservoirs.
However, previous studies have provided different conclusions on the origin of the formation water in the Xujiahe tight sandstone reservoir.
In this paper, the origin of the formation water in the Xujiahe Formation was determined based on the latest major and minor elemental concentration data, hydrogen and oxygen isotopes data of formation water, and carbon and oxygen isotope data of carbonate cements.
The results show that the salinity of the formation water of the Xujiahe Formation in the study area is generally greater than 50 g/L.
The water type is mainly the CaCl2 type, although a small proportion of NaHCO3 type water with high salinity is observed, which is related to hydrocarbon expulsion by overpressure.
Moreover, the formation water in the sandstone of the Xujiahe Formation is obviously rich in Br, which is related to membrane infiltration, overpressured hydrocarbon expulsion of shale and diagenesis of organic matter.
The composition of Cl− and Na+ ions in the formation water in the Xujiahe tight sandstone reservoir is consistent with the seawater evaporation curve, which deviates significantly from the freshwater evaporation curve.
The hydrogen and oxygen isotopes of condensate water in the Xujiahe Formation tight sandstone are similar to those of atmospheric precipitation water, while the hydrogen and oxygen isotopes of the formation water in the Xujiahe Formation show that it is of seawater origin.
Therefore, to use hydrogen and oxygen isotopes to determine the origin of formation water, condensate water must be accurately differentiated from formation water.
Otherwise, if the condensate water is misjudged as formation water, then incorrect conclusions will be drawn, e.
g.
, that the formation water of the Xujiahe Formation originated from fresh water.
Affected by organic carbon, the carbon isotope Z value of the carbonate cements in the Xujiahe Formation is low (mainly distributed between 110 and 130).
A Z value of less than 120 does not indicate that the ancient water bodies formed by cements were fresh water or mixed water bodies.
However, Z values greater than 120 correspond to a formation temperature lower than 80 C, which indicates that carbonate cement was not affected by organic carbon; thus, the Z value can reflect the origin of ancient water bodies.
The results of this study indicate that the formation water of the Xujiahe tight sandstone in the study area is of seawater origin.
The determination of the origin of the formation water and seawater of the Xujiahe Formation provides strong evidence for the determination of the marine sedimentary environment of the Xujiahe Formation in the study area, and can provide scientific guidance for the search for high-quality reservoirs.
Related Results
Densification Mechanism and Natural Gas Accumulation Process, Triassic Xujiahe Formation, Hechuan Area, Sichuan Basin, China
Densification Mechanism and Natural Gas Accumulation Process, Triassic Xujiahe Formation, Hechuan Area, Sichuan Basin, China
Abstract
We have witnessed a skyrocketing development of tight gas in China. However, all developed gas field in China face the obstacle of the decrease of productio...
Main Structural Styles and Deformation Mechanisms in the Northern Sichuan Basin, Southern China
Main Structural Styles and Deformation Mechanisms in the Northern Sichuan Basin, Southern China
Abstract: The Triassic Jialingjiang Formation and Leikoupo Formation are characterized by thick salt layers. Three tectono‐stratigraphic sequences can be identified according to de...
Tectonic Fractures in Tight Gas Sandstones of the Upper Triassic Xujiahe Formation in the Western Sichuan Basin, China
Tectonic Fractures in Tight Gas Sandstones of the Upper Triassic Xujiahe Formation in the Western Sichuan Basin, China
Abstract:The western Sichuan Basin, which is located at the front of the Longmen Mountains in the west of Sichuan Province, China, is a foreland basin formed in the Late Triassic. ...
Scale-dependency Wettability of Tight Sandstone: Insights from an Eocene fluvial sandstone reservoir in the Bohai Bay Basin
Scale-dependency Wettability of Tight Sandstone: Insights from an Eocene fluvial sandstone reservoir in the Bohai Bay Basin
In the development of tight oil reservoirs, wettability determines the distribution and flow behavior of oil and water during reservoir development and enhanced oil recovery. Howev...
Natural fractures in tight gas sandstones: a case study of the Upper Triassic Xujiahe Formation in Xinchang gas field, Western Sichuan Basin, China
Natural fractures in tight gas sandstones: a case study of the Upper Triassic Xujiahe Formation in Xinchang gas field, Western Sichuan Basin, China
AbstractThe Upper Triassic Xujiahe Formation is a typical tight gas reservoir in which natural fractures determine the migration, accumulation and production capacity of tight gas....
Study on Brittleness Characteristics and Fracturing Crack Propagation Law of Deep Thin-Layer Tight Sandstone in Longdong, Changqing
Study on Brittleness Characteristics and Fracturing Crack Propagation Law of Deep Thin-Layer Tight Sandstone in Longdong, Changqing
Tight-sandstone oil and gas resources are the key areas of unconventional oil and gas resources exploration and development. Because tight-sandstone reservoirs usually have the cha...
Pore throat characteristics of tight reservoirs by a combined mercury method: A case study of the member 2 of Xujiahe Formation in Yingshan gasfield, North Sichuan Basin
Pore throat characteristics of tight reservoirs by a combined mercury method: A case study of the member 2 of Xujiahe Formation in Yingshan gasfield, North Sichuan Basin
Abstract
The complex pore throat characteristics are significant factors that control the properties of tight sandstone reservoirs. Due to the strong heterogeneit...
3D3C application in prediction of fractures of deep-seated tight reservoir: An example of gas exploration in member 2 of Upper Triassic Xujiahe Formation, Xinchang gas field
3D3C application in prediction of fractures of deep-seated tight reservoir: An example of gas exploration in member 2 of Upper Triassic Xujiahe Formation, Xinchang gas field
The deep-seated gas reservoirs in the realm of continental deposits of the western Sichuan depression, which are super-tight, heterogeneous, fracture-pore gas reservoirs scattering...

