Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Strength of Liquid-Phase-Sintering Cordierite Ceramics
View through CrossRef
The high dense pure cordierite ceramics and liquid-phase-sintering cordierite ceramics were prepared with the starting powder made by sol-gel progress. The porosities of them are less than 6.21%, and some can be up to 1.0% especially. The flexural strength of the sample can get to 167 MPa, which is greater than that of 103 MPa of pure cordierite ceramics. The composition, fracture behavior
and microstructure of the liquid-phase-sintering cordierite ceramics are investigated. The result shows that the increased flexural strength is mainly attributed to the change in cell parameters of cordierite and the small grain size.
Trans Tech Publications, Ltd.
Title: Strength of Liquid-Phase-Sintering Cordierite Ceramics
Description:
The high dense pure cordierite ceramics and liquid-phase-sintering cordierite ceramics were prepared with the starting powder made by sol-gel progress.
The porosities of them are less than 6.
21%, and some can be up to 1.
0% especially.
The flexural strength of the sample can get to 167 MPa, which is greater than that of 103 MPa of pure cordierite ceramics.
The composition, fracture behavior
and microstructure of the liquid-phase-sintering cordierite ceramics are investigated.
The result shows that the increased flexural strength is mainly attributed to the change in cell parameters of cordierite and the small grain size.
Related Results
The Biomedical Investigation of Bioceramic Cordierite as Orthopedic Material
The Biomedical Investigation of Bioceramic Cordierite as Orthopedic Material
This study focused on the production of bioactive pure cordierite ceramic and the evaluation of its bioactivity by immersing it in simulated bodily fluid (SBF) and coating it on CP...
The Fabrication and Characterization Behavior of Cordierite Ceramic Materials with different Molar Fraction
The Fabrication and Characterization Behavior of Cordierite Ceramic Materials with different Molar Fraction
The investigation was concentrated on preparation of bioactive pure cordierite ceramic and evaluate the phase transformation which excepted to form during sintering process. Cordie...
Impact of Secondary Phases Content on the Mechanical Properties of Cordierite
Impact of Secondary Phases Content on the Mechanical Properties of Cordierite
The Cordierite ceramic body had been synthesized through conventional techniques solid state reaction by using non-stoichiometric composition (2.5 MgO. 1.8 Al2O3. 5 SiO2). The sint...
Determination of the potential byproduct in the toluene oxidation process by CuMnO<sub>x</sub> catalyst on cordierite substrate
Determination of the potential byproduct in the toluene oxidation process by CuMnO<sub>x</sub> catalyst on cordierite substrate
Cordierite is the substrate that posseses a low thermal expansion coefficient, good thermal shock resistance, excellent mechanical properties, and chemical resistance. Thus, cordie...
The Effect of Microwave Sintering Time to PM Aluminum Alloys
The Effect of Microwave Sintering Time to PM Aluminum Alloys
Microwave sintering is new sintering technology method to produce Al alloys. The advantages of this method because of very short sintering time and less production cost compare to ...
The effect of treated flue gas desulfurization (FGD) sludge addition on the properties of non-stoichiometric cordierite
The effect of treated flue gas desulfurization (FGD) sludge addition on the properties of non-stoichiometric cordierite
This study examines the incorporation of treated Flue Gas Desulphurization (FGD) by-products from the glass industry in Malaysia into non-stoichiometric cordierite compositions, fo...
Binary anorthite‐cordierite ceramic composite from kaolin and dolomite rock with improved characteristics
Binary anorthite‐cordierite ceramic composite from kaolin and dolomite rock with improved characteristics
AbstractBinary CaO‐MgO‐Al2O3‐SiO2 (CMAS) ceramics composites of anorthite‐cordierite composition were synthesized from natural raw materials (kaolin and dolomite rock). The change ...
Archean cordierite-orthopyroxene rocks from the eastern Beartooth Mountains, Montana, USA: insights into the local metamorphic pressure–temperature history
Archean cordierite-orthopyroxene rocks from the eastern Beartooth Mountains, Montana, USA: insights into the local metamorphic pressure–temperature history
Abstract
The metamorphic history of the eastern Beartooth Mountains of Montana in the northern Archean Wyoming Province is challenging to est...