Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Crevice Corrosion Propagation on Alloy 625 and Alloy C276 in Natural Seawater
View through CrossRef
Chemical composition of the aqueous solution within crevices on two different Ni-Cr-Mo-Fe alloys immersed in natural seawater was determined using a semiquantitative thin-layer chromatographic method. Active crevices were found to contain concentrated amounts of dissolved Ni2+, Cr3+, Mo3+, and Fe2+ ions. Propagation of crevice corrosion for the two alloys was determined from anodic polarization curves in model crevice solutions based upon stoichiometric dissolution or selective dissolution of alloy components. Both alloys 625 (UNS N06625) and C276 (UNS N10276) underwent crevice corrosion in the model crevice electrolytes. For the model crevice solution based upon selective dissolution of alloy constituents, the anodic dissolution rate for alloy 625 was higher than that for alloy C276. This trend was reversed for the model crevice solution based upon uniform dissolution of alloy constituents.
Association for Materials Protection and Performance (AMPP)
Title: Crevice Corrosion Propagation on Alloy 625 and Alloy C276 in Natural Seawater
Description:
Chemical composition of the aqueous solution within crevices on two different Ni-Cr-Mo-Fe alloys immersed in natural seawater was determined using a semiquantitative thin-layer chromatographic method.
Active crevices were found to contain concentrated amounts of dissolved Ni2+, Cr3+, Mo3+, and Fe2+ ions.
Propagation of crevice corrosion for the two alloys was determined from anodic polarization curves in model crevice solutions based upon stoichiometric dissolution or selective dissolution of alloy components.
Both alloys 625 (UNS N06625) and C276 (UNS N10276) underwent crevice corrosion in the model crevice electrolytes.
For the model crevice solution based upon selective dissolution of alloy constituents, the anodic dissolution rate for alloy 625 was higher than that for alloy C276.
This trend was reversed for the model crevice solution based upon uniform dissolution of alloy constituents.
Related Results
Cathodic Protection Of Stainless Steels Against Crevice Corrosion
Cathodic Protection Of Stainless Steels Against Crevice Corrosion
ABSTRACT
Crevice corrosion on stainless steel instrument components has been a problem affecting designers and operators of marine instrumentation packages for ma...
Investigating the Effect of High Pressures and Temperatures on Corrosion Inhibition for Water-Based Muds
Investigating the Effect of High Pressures and Temperatures on Corrosion Inhibition for Water-Based Muds
Corrosion is defined as gradual degradation of metal caused by a chemical or electrochemical reaction with its environment. In oil and gas sector, components can corrode at any sta...
Numerical Simulation of Crevice Corrosion
Numerical Simulation of Crevice Corrosion
Abstract
The process of crevice corrosion consists of anodic metal dissolution from the alloy to the crevice solution, cathodic reduction of oxygen on the bold surfa...
Crevice Corrosion Testing of Stainless Steel Tubes
Crevice Corrosion Testing of Stainless Steel Tubes
Abstract
Recently an European funded project aiming to develop a standard test method for qualifying stainless steels for crevice corrosion in seawater. In addition ...
The tribocorrosion behaviors of Hastelloy C276 alloy in seawater
The tribocorrosion behaviors of Hastelloy C276 alloy in seawater
Purpose
– The aim of this work is to study the tribocorrosion behaviors of Hastelloy C276 alloy sliding against AISI 316 stainless steel in artificial seawater and ...
Study on the effect of seawater on making and curing of unreinforced concrete applications
Study on the effect of seawater on making and curing of unreinforced concrete applications
Concrete, an essential component of worldwide infrastructure, depends significantly on fresh water for its manufacturing, contributing to freshwater scarcity in many regions. As co...
6% Mo Austenitic Stainless Steel Selection for Offshore Applications
6% Mo Austenitic Stainless Steel Selection for Offshore Applications
ABSTRACT
6% Mo austenitic stainless steels are increasingly being used in the offshore industry as a construction material for handling seawater and hydrocarbon/s...
Corrosion Of Copper-Base Alloys In A Geothermal Brine
Corrosion Of Copper-Base Alloys In A Geothermal Brine
Abstract
The geothermal environment and the experimental procedures and schedules for corrosion tests of copper-base procedures and schedules for corrosion tests ...