Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
EXPERIMENTAL INVESTIGATION ON THE EFFECT OF CUTTING PARAMETERS ON CUTTING TEMPERATURE DURING TURNING OF X200Cr12 WITH COATED AND UNCOATED INSERTS
View through CrossRef
One of the most important phenomena associated with machining operations is the cutting temperature because it affects the life of the cutting tool. Cutting parameters and insert material are the important conditions that affect temperature in turning. In this study, tests were carried out on X 200 Cr 12 steel during turning process. In ordre to measure the cutting temperature of the tool, the thermocouple method was used. The results illustrate that cutting temperature increases with depth of cut, feed rate, and the rotational speed. Due to the high conductivity of the insert coating, the tool cutting temperature reaches much higher levels than in the case of uncoated inserts. The conductivity of the insert affects the cutting temperature. The most influential parameters on the cutting temperature are feed rate and depth of cut.
Professional Association in Modern Manufacturing Technologies
Title: EXPERIMENTAL INVESTIGATION ON THE EFFECT OF CUTTING PARAMETERS ON CUTTING TEMPERATURE DURING TURNING OF X200Cr12 WITH COATED AND UNCOATED INSERTS
Description:
One of the most important phenomena associated with machining operations is the cutting temperature because it affects the life of the cutting tool.
Cutting parameters and insert material are the important conditions that affect temperature in turning.
In this study, tests were carried out on X 200 Cr 12 steel during turning process.
In ordre to measure the cutting temperature of the tool, the thermocouple method was used.
The results illustrate that cutting temperature increases with depth of cut, feed rate, and the rotational speed.
Due to the high conductivity of the insert coating, the tool cutting temperature reaches much higher levels than in the case of uncoated inserts.
The conductivity of the insert affects the cutting temperature.
The most influential parameters on the cutting temperature are feed rate and depth of cut.
Related Results
EXPERIMENTAL STUDY ON THE SURFACE ROUGHNESS AND OPTIMIZATION OF CUTTING PARAMETERS IN THE HARD TURNING USING BIOCOMPATIBLE TiAlN-COATED AND UNCOATED CARBIDE INSERTS
EXPERIMENTAL STUDY ON THE SURFACE ROUGHNESS AND OPTIMIZATION OF CUTTING PARAMETERS IN THE HARD TURNING USING BIOCOMPATIBLE TiAlN-COATED AND UNCOATED CARBIDE INSERTS
Machining of difficult-to-cut materials has always been a focus of research. In terms of surface roughness, it is one of the most important machinability indicators used to evaluat...
Numerical investigation of dimple-texturing on the turning performance of hardened AISI H-13 steel
Numerical investigation of dimple-texturing on the turning performance of hardened AISI H-13 steel
Forming micro-dimples nearer to the cutting edge on the rack face of the tungsten carbide cutting inserts will positively influence the machinability. However, it is challenging to...
Machinability Study of Super Duplex Stainless Steel S32750 with Magnetorheological Fluid Assisted Nano Finished Cutting Tool Inserts
Machinability Study of Super Duplex Stainless Steel S32750 with Magnetorheological Fluid Assisted Nano Finished Cutting Tool Inserts
Abstract
To improve tribological properties in the tool chip contact zone, coated carbide tool insert surfaces are nano-finished using magnetorheological fluid (MRF) with d...
Performance Evaluation and Experimental Investigations in Turning of Iron Based A286 Nickel Alloy under Various Machining Conditions
Performance Evaluation and Experimental Investigations in Turning of Iron Based A286 Nickel Alloy under Various Machining Conditions
The advancement of materials in the last few decades has guided the development of many hard-to-machine materials, such as superalloys. These alloys have poor machinability charact...
Ceramic inserts do not generally improve resin composite margins
Ceramic inserts do not generally improve resin composite margins
summary  Ceramic inserts are reported to possibly reduce polymerization shrinkage for posterior resin composite fillings. The aim of the present investigation was to evaluate the e...
Analyzing Cutting Temperature in Hard-Turning Technique with Standard Inserts Through Both Simulation and Experimental Investigations
Analyzing Cutting Temperature in Hard-Turning Technique with Standard Inserts Through Both Simulation and Experimental Investigations
The cutting temperature in hard turning is extremely high, which reduces tool life, lowers machined-surface quality, and affects dimensional control. However, hard turning differs ...
A Study on Evaluation of Drug Package Inserts in Kashmir, India
A Study on Evaluation of Drug Package Inserts in Kashmir, India
Background: Drugs constitute a major part of the therapeutic modality for most of the patients. Accurate and authentic drug information is important for its safe and effective mark...
Experimental Evaluation of Innovative Tools for Ti-6Al-4V Turning
Experimental Evaluation of Innovative Tools for Ti-6Al-4V Turning
Titanium alloys, mainly because of their poor thermal conductivity, need to be cut at relatively low cutting speeds, with obvious negative consequences on the profitability of mach...