Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Defoamers in the Coatings Industry
View through CrossRef
Foam bubbles can be a very severe problem in all kinds of coating systems. Mechanisms of foam stabilization and mechanisms of defoamers are briefly reviewed. The chemistry of different defoamer classes (mineral oil defoamers, silicone defoamers, silicone-free polymeric defoamers) together
with their typical application areas are discussed. Information about defoamer selection and evaluation methods is given.
Title: Defoamers in the Coatings Industry
Description:
Foam bubbles can be a very severe problem in all kinds of coating systems.
Mechanisms of foam stabilization and mechanisms of defoamers are briefly reviewed.
The chemistry of different defoamer classes (mineral oil defoamers, silicone defoamers, silicone-free polymeric defoamers) together
with their typical application areas are discussed.
Information about defoamer selection and evaluation methods is given.
Related Results
An Innovative Approach for Laboratory Evaluation of Defoamers for Oilfield Cementing Applications
An Innovative Approach for Laboratory Evaluation of Defoamers for Oilfield Cementing Applications
Abstract
Defoamers and antifoams are crucial components in many processes of the oil and gas industry. In particular, they play a vital role in well cementing where ...
PROTECTIVE ABILITY OF TIN-NICKEL COATINGS
PROTECTIVE ABILITY OF TIN-NICKEL COATINGS
The calculation of the corrosion current of the steel – plating allowed us to estimate the protective properties and the porosity of the Tin-Nickel coatings. Measured in 3% NaCl so...
New Generation of "Green" Defoamers for Challenging Drilling and Cementing Applications
New Generation of "Green" Defoamers for Challenging Drilling and Cementing Applications
Abstract
Increased environmental regulations in the North Sea, US and Canada offshores (OSPAR, US EPA, etc.) call for the use of less toxic and biodegradable chemica...
Strain-Induced Cracking Behavior of Coating/Substrate Systems and Strain Tolerant Design for Thick Coatings
Strain-Induced Cracking Behavior of Coating/Substrate Systems and Strain Tolerant Design for Thick Coatings
The life span for a coating attached to its substrate is basic support for their desired protective function. Therefore, it is necessary to find out the causes responsible for the ...
Hygro-mechanical short-term behaviour of selected coatings: experiments and material modelling on vapour permeability and mechanical properties
Hygro-mechanical short-term behaviour of selected coatings: experiments and material modelling on vapour permeability and mechanical properties
Abstract
Many pieces of fine art are made of wood that has been treated with coatings. Since wood is a very hygroscopic material, the moisture content strongly influences...
Wear-resistant Coatings on Aluminum Alloys
Wear-resistant Coatings on Aluminum Alloys
Aluminum alloys are widely used in industry. Recently, they are used as a replacement for steel for the manufacture of pulleys, gears, columns of hydraulic rotary transmissions of ...
Studies on Electroless Coatings at IIT Roorkee - A Brief Review
Studies on Electroless Coatings at IIT Roorkee - A Brief Review
Since the introduction of Electroless (EL) coating in 1946 by Brenner and Riddle, the process has been the subject of steady growth. It is one of the most elegant methods available...
STUDY OF TRIBOLOGICAL CHARACTERISTICS OF PROTECTIVE ANTICORROSIVE MoCrN COATINGS
STUDY OF TRIBOLOGICAL CHARACTERISTICS OF PROTECTIVE ANTICORROSIVE MoCrN COATINGS
Experimental works aimed at studying tribological characteristics of MoCrN coatings have been carried out. Interest in such studies is primarily due to the prospect of using such c...