Javascript must be enabled to continue!
Melt Migration in Crystal Mushes by Viscous Fingering: Insights From High‐Temperature, High‐Pressure Experiments
View through CrossRef
AbstractWe conducted experiments to study melt migration in crystal‐rich mushes, with application to magma ascent within transcrustal magma reservoirs. Mushes with crystal volume fractions of 0.59–0.83 were prepared by hot‐pressing crushed borosilicate glass mixed with different proportions of quartz sand particles. Each experimental sample comprises stacked disks of mush and soda‐lime glass, a proxy for crystal‐free magma. Samples were subjected to confining pressures of 100–300 MPa and a temperature of 900°C (above the glass transition temperatures of the borosilicate and soda‐lime glasses) for up to 6 h. The bottom and circumference of the mush and soda lime disks experience the confining pressure, but the top of the mush disks is at room pressure, resulting in a pore‐pressure gradient across the mush layer. Following cooling and decompression, we determined the area fraction and morphology of soda‐lime melt that migrated into the mush layer during experiments. Melt fraction is more strongly correlated to crystal fraction than pore‐pressure gradient, increasing with crystal fraction before sharply decreasing as crystal fractions exceed 0.8. This change at 0.8 coincides with the transition from crystals in the mush moving during soda‐lime migration to crystals forming a continuous rigid network. In our experiments, melt migration occurred by viscous fingering, but near the mobile‐to‐rigid transition, melt migration is enhanced by additional capillary action. Our results indicate that magma migration may peak when rigid mushes “unlock” to become mobile. This transition may mark an increase in magma migration, a potential precursor to volcanic unrest and eruption.
American Geophysical Union (AGU)
Title: Melt Migration in Crystal Mushes by Viscous Fingering: Insights From High‐Temperature, High‐Pressure Experiments
Description:
AbstractWe conducted experiments to study melt migration in crystal‐rich mushes, with application to magma ascent within transcrustal magma reservoirs.
Mushes with crystal volume fractions of 0.
59–0.
83 were prepared by hot‐pressing crushed borosilicate glass mixed with different proportions of quartz sand particles.
Each experimental sample comprises stacked disks of mush and soda‐lime glass, a proxy for crystal‐free magma.
Samples were subjected to confining pressures of 100–300 MPa and a temperature of 900°C (above the glass transition temperatures of the borosilicate and soda‐lime glasses) for up to 6 h.
The bottom and circumference of the mush and soda lime disks experience the confining pressure, but the top of the mush disks is at room pressure, resulting in a pore‐pressure gradient across the mush layer.
Following cooling and decompression, we determined the area fraction and morphology of soda‐lime melt that migrated into the mush layer during experiments.
Melt fraction is more strongly correlated to crystal fraction than pore‐pressure gradient, increasing with crystal fraction before sharply decreasing as crystal fractions exceed 0.
8.
This change at 0.
8 coincides with the transition from crystals in the mush moving during soda‐lime migration to crystals forming a continuous rigid network.
In our experiments, melt migration occurred by viscous fingering, but near the mobile‐to‐rigid transition, melt migration is enhanced by additional capillary action.
Our results indicate that magma migration may peak when rigid mushes “unlock” to become mobile.
This transition may mark an increase in magma migration, a potential precursor to volcanic unrest and eruption.
Related Results
Immiscible Viscous Fingering: the Effects of Wettability/Capillarity and Scaling
Immiscible Viscous Fingering: the Effects of Wettability/Capillarity and Scaling
Abstract
Realistic immiscible viscous fingering, showing all of the complex finger structure observed in experiments, has proved to be very difficult to model using direct ...
An experimental study of melt migration in crystal-rich mushes
An experimental study of melt migration in crystal-rich mushes
<p>Increasingly, volcanologists model mature volcanic systems as being fed by stratified magma reservoirs, that is, small lenses of eruptible magma suspended within a...
Timescale of pervasive melt migration in the continental crust
Timescale of pervasive melt migration in the continental crust
Movement of a large volume of granitic melt is an important factor in the compositional differentiation of the continental crust and the presence of melt in rocks profoundly influe...
Europa’s seafloor may not be silent
Europa’s seafloor may not be silent
AbstractEuropa is a primary candidate for habitability due to the presence of a liquid subsurface ocean in direct contact with its rocky mantle [1]. Chemical exchanges favored by h...
Optimizing Injection Parameters of Multi-Stage Alternating Acid Fracturing with a Coupled Model of Acid Etching and Interface Tracking
Optimizing Injection Parameters of Multi-Stage Alternating Acid Fracturing with a Coupled Model of Acid Etching and Interface Tracking
Abstract
Acid fracturing enhances hydrocarbon production in tight carbonate reservoirs by creating fracture conductivity through non-uniform acid-rock reactions alon...
Disequilibrium during mush evolution in the Bárðarbunga volcanic system, Iceland
Disequilibrium during mush evolution in the Bárðarbunga volcanic system, Iceland
The prevalence, durability and physical significance of crystal mushes in crustal magmatic systems is a topic of current interest in igneous petrology. Fragments of mushes brought ...
Earth Observation for Surface Melt Monitoring over Antarctic Ice Shelves: Opportunities and Challenges 
Earth Observation for Surface Melt Monitoring over Antarctic Ice Shelves: Opportunities and Challenges 
<p><span>Surface meltwater is becoming an increasing driver for ice shelf disintegration and consequent mass loss from the AIS. In this regard, monitori...
Modeling the Performance of Horizontal Injection Wells in Carbon Dioxide Miscible Displacement Processes
Modeling the Performance of Horizontal Injection Wells in Carbon Dioxide Miscible Displacement Processes
ABSTRACT
A black-oil, pseudo-miscible simulator, a compositional simulator, and a compositional/ incomplete mixing simulator were used to model first-contact miscibl...

