Javascript must be enabled to continue!
GNSS-based orbit and geodetic parameter estimation by means of simulated GENESIS data
View through CrossRef
The ESA GENESIS mission, which obtained green light at ESA's Council Meeting at Ministerial Level in November 2022 and which is expected to be launched in 2027, aims to significantly enhance the accuracy and stability of the Terrestrial Reference Frame (TRF). This shall be achieved by equipping one satellite at approximately 6000 km altitude with well-calibrated instruments for all four space-geodetic techniques contributing to TRF realizations, i.e., Global Navigation Satellite Systems (GNSS), Satellite Laser Ranging (SLR), Very Long Baseline Interferometry (VLBI) and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS), and by exploiting the such realized very precise space collocations.The GENESIS satellite is foreseen to carry a zenith- and nadir-pointing GNSS antenna to track (at least) GPS and Galileo signals. Because of its very high altitude, GENESIS will cover much larger nadir angles as seen from the GNSS transmitting antennas, compared to receivers at ground or in low Earth orbit. This will partly result in GNSS observations with lower signal-to-noise ratios. Furthermore, to date, only little reliable information is available on the GNSS transmit antenna gain and carrier phase patterns at very large nadir angles. These problems lead to questions with respect to the best possible exploitation of GNSS data by GENESIS, e.g., whether phase pattern calibrations will need to be performed by means of tracked GNSS data (which would weaken the GNSS contribution to GENESIS).The aim of this study is to assess the impact of GNSS transmit antenna phase pattern errors on the GNSS-based POD of GENESIS, as well as global GNSS network solutions for GNSS orbits and clock corrections, Earth rotation and geocenter parameters and station coordinates based on GNSS observations from GENESIS and terrestrial stations. To accomplish this, we employ simulated GNSS pseudo-range and carrier phase data for GENESIS and ground stations, which have been generated based on detailed link-budget computations and a comprehensive set of transmit antenna gain patterns. The data are used for closed-loop simulation investigations, which allow to compare the reconstructed orbit and geodetic parameter solutions to the simulation truth and offer a quantification of the impact of transmit antenna phase pattern uncertainties on the estimated parameters.
Title: GNSS-based orbit and geodetic parameter estimation by means of simulated GENESIS data
Description:
The ESA GENESIS mission, which obtained green light at ESA's Council Meeting at Ministerial Level in November 2022 and which is expected to be launched in 2027, aims to significantly enhance the accuracy and stability of the Terrestrial Reference Frame (TRF).
This shall be achieved by equipping one satellite at approximately 6000 km altitude with well-calibrated instruments for all four space-geodetic techniques contributing to TRF realizations, i.
e.
, Global Navigation Satellite Systems (GNSS), Satellite Laser Ranging (SLR), Very Long Baseline Interferometry (VLBI) and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS), and by exploiting the such realized very precise space collocations.
The GENESIS satellite is foreseen to carry a zenith- and nadir-pointing GNSS antenna to track (at least) GPS and Galileo signals.
Because of its very high altitude, GENESIS will cover much larger nadir angles as seen from the GNSS transmitting antennas, compared to receivers at ground or in low Earth orbit.
This will partly result in GNSS observations with lower signal-to-noise ratios.
Furthermore, to date, only little reliable information is available on the GNSS transmit antenna gain and carrier phase patterns at very large nadir angles.
These problems lead to questions with respect to the best possible exploitation of GNSS data by GENESIS, e.
g.
, whether phase pattern calibrations will need to be performed by means of tracked GNSS data (which would weaken the GNSS contribution to GENESIS).
The aim of this study is to assess the impact of GNSS transmit antenna phase pattern errors on the GNSS-based POD of GENESIS, as well as global GNSS network solutions for GNSS orbits and clock corrections, Earth rotation and geocenter parameters and station coordinates based on GNSS observations from GENESIS and terrestrial stations.
To accomplish this, we employ simulated GNSS pseudo-range and carrier phase data for GENESIS and ground stations, which have been generated based on detailed link-budget computations and a comprehensive set of transmit antenna gain patterns.
The data are used for closed-loop simulation investigations, which allow to compare the reconstructed orbit and geodetic parameter solutions to the simulation truth and offer a quantification of the impact of transmit antenna phase pattern uncertainties on the estimated parameters.
Related Results
GNSS reflectometry for land remote sensing applications
GNSS reflectometry for land remote sensing applications
Soil moisture and vegetation biomass are two essential parameters from a scienti c and economical point of view. On one hand, they are key for the understanding of the hydrological...
The upper connected edge geodetic number of a graph
The upper connected edge geodetic number of a graph
For a non-trivial connected graph G, a set S ? V (G) is called an edge
geodetic set of G if every edge of G is contained in a geodesic joining some
pair of vertices in S. The...
Correcting geocenter motion in GNSS solutions by combining with satellite laser ranging data
Correcting geocenter motion in GNSS solutions by combining with satellite laser ranging data
Abstract
Geocenter motion in GNSS solutions is ill-defined because of the GNSS orbit modeling errors. Especially, the Z geocenter component derived from GNSS data is most...
Space weather impacts on Geodesy
Space weather impacts on Geodesy
<p>Space Weather refers to events on the Sun that have an impact on terrestrial technologies and man-made satellites. The Global Navigation Satellite System (GNSS) is...
GNSS/Acoustic positioning of acoustic beacons on the seafloor using an autonomous surface vehicle. Example from the FOCUS experiment offshore Sicily (Italy)
GNSS/Acoustic positioning of acoustic beacons on the seafloor using an autonomous surface vehicle. Example from the FOCUS experiment offshore Sicily (Italy)
<p>The FOCUS project funded by the European Research Council aims at monitoring deformation across an active submarine fault with an optical fiber using laser reflect...
A tightly coupled GNSS RTK/IMU integration with GA-BP neural network for challenging urban navigation
A tightly coupled GNSS RTK/IMU integration with GA-BP neural network for challenging urban navigation
Abstract
Intelligent transportation system is increasing the importance of real-time acquisition of positioning, navigation, and timing information from high-accurac...
Routine Measurement of Water Vapour Using GNSS in the Framework of the Map-Io Project
Routine Measurement of Water Vapour Using GNSS in the Framework of the Map-Io Project
The “Marion Dufresne Atmospheric Program-Indian Ocean” (MAP-IO) project is a research program that aims to collect long-term atmospheric observations in the under-instrumented Indi...
New Developments in Near Real-Time GNSS Zenith Total Delay Estimates at the University of Luxembourg
New Developments in Near Real-Time GNSS Zenith Total Delay Estimates at the University of Luxembourg
Recently, the University of Luxembourg (UL), in collaboration with the United Kingdom Met Office, has started providing accurate near real-time (NRT) Zenith Total Delays (ZTDs) fro...

