Temperature Environmental Adaptability Research of HNIW/FOX-7 Based PBXs

Abstract In this study, HNIW/FOX-7 based PBX modeling powders and PBX columns were treated by LT (low temperature), HT (high temperature), HLC (high-low temperature cycle) and HLS (high-low temperature shock) to study temperature environmental adaptability of HNIW/FOX-7 based PBXs. Then SEM, IR, XRD and DSC were used to study the variation of PBX modeling powders after LT, HT, HLC and HLS treatments; in addition, the mass, size and mechanical properties of PBX columns were characterized after different temperature adaptability treatments as well. The results indicate that the change ratios of mass and size of HNIW/FOX-7 based PBX columns are less than 1%, illustrating that mass and size of PBX columns are at acceptable level after different temperature adaptability treatments. The unevenness degree of the surface of PBX modeling powders followed the order of HLC>HT>LT>HLS, which agrees well with mass loss order. Moreover, IR and XRD results indicated that the molecular structure and crystal form of HNIW and FOX-7 did not change after different temperature adaptability treatments. Additionally, thermal stabilities of PBX modeling powders are decreased after different temperature adaptability treatments, among which HLS has the largest influence on HNIW/FOX-based PBX modeling powders. The compression strengths and elastic moduli of HNIW/FOX-based PBX columns are enhanced after different temperature adaptability treatments, among which the strength of PBX columns after HLC has the maximum increase, indicating that HLC has more significant effect on mechanical property.