Javascript must be enabled to continue!
Facies architecture, detrital provenance, and tectonic modulation of sedimentation in the Shikoku Basin: Inputs to the Nankai Trough subduction zone
View through CrossRef
ABSTRACT
The Shikoku Basin is a back-arc basin located offshore southwest Japan. Sediments within the basin make up a key part of the subduction inputs to the Nankai Trough. A 19 m.y. history of sedimentation has been documented at Sites C0011 and C0012 of the Integrated Ocean Drilling Program (Kumano transect) and Sites 1173 and 1177 of the Ocean Drilling Program (Muroto and Ashizuri transects, respectively). This paper focuses on three noteworthy aspects of that history: (1) the onset of substantial pyroclastic influx, which shifted significantly along the strike length of the margin, from 3.3–3.9 Ma at Sites 1177 and 1173 to 7.6–7.8 Ma at Sites C0011 and C0012; (2) transport of sand by sediment gravity flows, which resulted in three discrete sand bodies during the Miocene (Kyushu, Daiichi Zenisu, and Daini Zenisu submarine fans); and (3) clay mineral assemblages within hemipelagic mudstones, which show systematic reduction of 3 wt% detrital smectite per 1 m.y. decrease in age. Collectively, these temporal and spatial adjustments of lithofacies and sediment composition have important implications for downdip and along-strike projections of frictional, geotechnical, and hydrogeological properties as strata enter the Nankai subduction zone. The stratigraphic positions of smectite-rich Miocene mudstones, for example, should match up with increases in the volume of fluid production by clay dehydration during subduction. The higher-permeability sand bodies (Kyushu and Zenisu submarine fans) should act as preferred conduits for focused fluid flow. The potential for buildup of fluid overpressures should increase above and laterally adjacent to stratigraphic pinch-outs of sand bodies, especially where the aquifers are inclined or confined between basement highs. These three-dimensional complexities set the Nankai-Shikoku system apart from other subduction zones (e.g., Japan Trench, Costa Rica) where inputs consist of comparatively homogeneous pelagic and hemipelagic deposits.
Geological Society of America
Title: Facies architecture, detrital provenance, and tectonic modulation of sedimentation in the Shikoku Basin: Inputs to the Nankai Trough subduction zone
Description:
ABSTRACT
The Shikoku Basin is a back-arc basin located offshore southwest Japan.
Sediments within the basin make up a key part of the subduction inputs to the Nankai Trough.
A 19 m.
y.
history of sedimentation has been documented at Sites C0011 and C0012 of the Integrated Ocean Drilling Program (Kumano transect) and Sites 1173 and 1177 of the Ocean Drilling Program (Muroto and Ashizuri transects, respectively).
This paper focuses on three noteworthy aspects of that history: (1) the onset of substantial pyroclastic influx, which shifted significantly along the strike length of the margin, from 3.
3–3.
9 Ma at Sites 1177 and 1173 to 7.
6–7.
8 Ma at Sites C0011 and C0012; (2) transport of sand by sediment gravity flows, which resulted in three discrete sand bodies during the Miocene (Kyushu, Daiichi Zenisu, and Daini Zenisu submarine fans); and (3) clay mineral assemblages within hemipelagic mudstones, which show systematic reduction of 3 wt% detrital smectite per 1 m.
y.
decrease in age.
Collectively, these temporal and spatial adjustments of lithofacies and sediment composition have important implications for downdip and along-strike projections of frictional, geotechnical, and hydrogeological properties as strata enter the Nankai subduction zone.
The stratigraphic positions of smectite-rich Miocene mudstones, for example, should match up with increases in the volume of fluid production by clay dehydration during subduction.
The higher-permeability sand bodies (Kyushu and Zenisu submarine fans) should act as preferred conduits for focused fluid flow.
The potential for buildup of fluid overpressures should increase above and laterally adjacent to stratigraphic pinch-outs of sand bodies, especially where the aquifers are inclined or confined between basement highs.
These three-dimensional complexities set the Nankai-Shikoku system apart from other subduction zones (e.
g.
, Japan Trench, Costa Rica) where inputs consist of comparatively homogeneous pelagic and hemipelagic deposits.
Related Results
HypoNet Nankai: Rapid Hypocenter Determination Tool for the Nankai Trough Subduction Zone Using Physics-Informed Neural Networks
HypoNet Nankai: Rapid Hypocenter Determination Tool for the Nankai Trough Subduction Zone Using Physics-Informed Neural Networks
Abstract
Accurate hypocenter determination in the Nankai trough subduction zone is essential for hazard assessment and advancing our understanding of seismic acti...
IODP Expedition 333: Return to Nankai Trough Subduction Inputs Sites and Coring of Mass Transport Deposits
IODP Expedition 333: Return to Nankai Trough Subduction Inputs Sites and Coring of Mass Transport Deposits
Integrated Ocean Drilling Program (IODP) Expedition 333 returned to two sites drilled during IODP Expedition 322 on the ocean side of the Nankai Trough to pursue the characterizati...
Geodynamic modelling of continental subduction beneath oceanic lithosphere
Geodynamic modelling of continental subduction beneath oceanic lithosphere
Subduction of an oceanic plate beneath either an oceanic, or a continental, overriding plate requires two main conditions to occur in a steady state: i) a high enough subduction ra...
Sismotectonique du prisme de la Barbade : implications sur le potentiel sismogénique de la zone de subduction des Antilles
Sismotectonique du prisme de la Barbade : implications sur le potentiel sismogénique de la zone de subduction des Antilles
La zone de subduction des Petites Antilles résulte de la subduction des plaques nord- et sud-américaines sous la plaque Caraïbe dans une direction SW à ~ 2 cm/an. Cette zone pourra...
En skvatmølle i Ljørring
En skvatmølle i Ljørring
A Horizontal Mill at Ljørring, Jutland.Horizontal water-mills have been in use in Jutland since the beginning of the Christian era 2). But the one here described shows so close a c...
Dynamics of multiple microcontinent accretion during oceanic subduction
Dynamics of multiple microcontinent accretion during oceanic subduction
Microcontinent accretion during oceanic subduction is one of the main contributors to continental crustal growth. Many of the continental mountain belts we find today were built fr...
U–Pb age and Hf isotopic characteristics of detrital zircon from the Nanhua System in Longsheng, northern Guangxi Province, and their geological significance
U–Pb age and Hf isotopic characteristics of detrital zircon from the Nanhua System in Longsheng, northern Guangxi Province, and their geological significance
U–Pb dating and Hf isotopes of detrital zircons from the Nanhua System in Longsheng, northern Guangxi, were investigated to determine the depositional age and provenance of the Nan...
Upper-plate tectonic hysteresis and segmentation of the rupture area during seismogenesis in subduction zones—A case study of the Nankai Trough
Upper-plate tectonic hysteresis and segmentation of the rupture area during seismogenesis in subduction zones—A case study of the Nankai Trough
ABSTRACT
Understanding the factors controlling earthquake rupture areas in subduction zones is a fundamental question in geodynamic research. In the Nankai Trough, J...

