Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Synthesis, structure, and mechanical properties of silica nanocomposite polyrotaxane gels

View through CrossRef
A significantly soft and tough nanocomposite gel was realized by a novel network formed using cyclodextrin-based polyrotaxanes. Covalent bond formation between the cyclic components of polyrotaxanes and the surface of silica nanoparticles (15 nm diameter) resulted in an infinite network structure without direct bonds between the main chain polymer and the silica. Small-angle X-ray scattering revealed that the homogeneous distribution of silica nanoparticles in solution was maintained in the gel state. Such homogeneous nanocomposite gels were obtained with at least 30 wt % silica content, and the Young’s modulus increased with silica content. Gelation did not occur without silica. This suggests that the silica nanoparticles behave as cross-linkers. Viscoelastic measurements of the nanocomposite gels showed no stress relaxation regardless of the silica content for <20% compression strain, indicating an infinite stable network without physical cross-links that have finite lifetime. On the other hand, the infinite network exhibited an abnormally low Young’s modulus, ~1 kPa, which is not explainable by traditional rubber theory. In addition, the composite gels were tough enough to completely maintain the network structure under 80% compression strain. These toughness and softness properties are attributable to both the characteristic sliding of polymer chains through the immobilized cyclodextrins on the silica nanoparticle and the entropic contribution of the cyclic components to the elasticity of the gels.
Title: Synthesis, structure, and mechanical properties of silica nanocomposite polyrotaxane gels
Description:
A significantly soft and tough nanocomposite gel was realized by a novel network formed using cyclodextrin-based polyrotaxanes.
Covalent bond formation between the cyclic components of polyrotaxanes and the surface of silica nanoparticles (15 nm diameter) resulted in an infinite network structure without direct bonds between the main chain polymer and the silica.
Small-angle X-ray scattering revealed that the homogeneous distribution of silica nanoparticles in solution was maintained in the gel state.
Such homogeneous nanocomposite gels were obtained with at least 30 wt % silica content, and the Young’s modulus increased with silica content.
Gelation did not occur without silica.
This suggests that the silica nanoparticles behave as cross-linkers.
Viscoelastic measurements of the nanocomposite gels showed no stress relaxation regardless of the silica content for <20% compression strain, indicating an infinite stable network without physical cross-links that have finite lifetime.
On the other hand, the infinite network exhibited an abnormally low Young’s modulus, ~1 kPa, which is not explainable by traditional rubber theory.
In addition, the composite gels were tough enough to completely maintain the network structure under 80% compression strain.
These toughness and softness properties are attributable to both the characteristic sliding of polymer chains through the immobilized cyclodextrins on the silica nanoparticle and the entropic contribution of the cyclic components to the elasticity of the gels.

Related Results

(Invited) Force-Responsive Hydrogel Made of Block Polyrotaxane
(Invited) Force-Responsive Hydrogel Made of Block Polyrotaxane
Stimuli-responsive polymers that are sensitive to certain triggers from the external environment have been attracting many researchers’ interests. Stimulus that can be used to trig...
Polyrotaxane and Slide-Ring Materials
Polyrotaxane and Slide-Ring Materials
Polyrotaxane is a necklace-like supramolecule in which many cyclic molecules are threaded into a single polymer chain and can be cross-linked to produce functional polymeric materi...
Simulation of mechanical properties based on microstructure in polyethylene/montmorillonite nanocomposites
Simulation of mechanical properties based on microstructure in polyethylene/montmorillonite nanocomposites
In order to explore the microscopic mechanism of mechanical properties in polyethylene/montmorillonite (PE/MMT) nanocomposite material,the molecular model and the molecule structur...
Fundamental Properties of Packing Materials for Liquid Chromatography
Fundamental Properties of Packing Materials for Liquid Chromatography
The high performance of chemically-modified silica gel packing materials is based on the utilization of pure silica gels. Earlier silica gels used to be made from inorganic silica;...
Applications of Polyrotaxane and Slide-ring Materials
Applications of Polyrotaxane and Slide-ring Materials
This final chapter deals with various applications of cyclodextrin-based polyrotaxane and slide-ring materials. First, the biomedical applications of polyrotaxane are reviewed: bio...
Scattering Studies of Polyrotaxane and Slide-ring Materials
Scattering Studies of Polyrotaxane and Slide-ring Materials
The molecular structure and dynamics of polyrotaxane and slide-ring materials have been studied by light, X-ray, and neutron scattering techniques. Small-angle neutron scattering (...
A comprehensive study on enhancing of the mechanical properties of steel fiber-reinforced concrete through nano-silica integration
A comprehensive study on enhancing of the mechanical properties of steel fiber-reinforced concrete through nano-silica integration
AbstractSteel fiber reinforced concrete (SFRC) offers improved toughness, crack resistance, and impact resistance. Nano-silica enhances the strength, durability, and workability of...

Back to Top