Javascript must be enabled to continue!
Time Integrated Metal Accumulation on Pellets in an Industrial Harbour “Durban Harbour”
View through CrossRef
Once in the environment, preproduction plastic polymers between 2–5 mm in size, also known as pellets, can cause physical harm to animals that mistake them for food as they have been reported to accumulate toxic substances, including on their surface. However, the rate of metal enrichment on pellets is not well investigated. In October 2018, Durban experienced a storm that resulted in ±2000 tons of polyethylene pellets being spilt into Durban Harbour, which caused environmental pollution concerns. This event provided a unique opportunity to study metal accumulation on pellets. Pellets were collected at one-month intervals for 6 months following the spill from October 2017 to March 2018, and metal concentrations were compared to concentrations found on pellets collected before the spill. The pellets were digested using a mixture of concentrated nitric acid (55%) and sulphuric acid (60%) at a ratio of 3:1 and analysed for numerous trace metals (Al, As, Pb, Cd, Cr, Fe, Cu, Mn, Ni, and Zn) using the Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Pellets collected in Durban Harbour prior to the spill in a related study (unpublished data) showed higher metal accumulation; however, there was no evident linear increase in metal concentration in pellets over time. ANOVA showed no significant difference for all metals (p > 0.05) in metal concentration between months; however, there was a significant difference between aged and newly introduced pellets.
Title: Time Integrated Metal Accumulation on Pellets in an Industrial Harbour “Durban Harbour”
Description:
Once in the environment, preproduction plastic polymers between 2–5 mm in size, also known as pellets, can cause physical harm to animals that mistake them for food as they have been reported to accumulate toxic substances, including on their surface.
However, the rate of metal enrichment on pellets is not well investigated.
In October 2018, Durban experienced a storm that resulted in ±2000 tons of polyethylene pellets being spilt into Durban Harbour, which caused environmental pollution concerns.
This event provided a unique opportunity to study metal accumulation on pellets.
Pellets were collected at one-month intervals for 6 months following the spill from October 2017 to March 2018, and metal concentrations were compared to concentrations found on pellets collected before the spill.
The pellets were digested using a mixture of concentrated nitric acid (55%) and sulphuric acid (60%) at a ratio of 3:1 and analysed for numerous trace metals (Al, As, Pb, Cd, Cr, Fe, Cu, Mn, Ni, and Zn) using the Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES).
Pellets collected in Durban Harbour prior to the spill in a related study (unpublished data) showed higher metal accumulation; however, there was no evident linear increase in metal concentration in pellets over time.
ANOVA showed no significant difference for all metals (p > 0.
05) in metal concentration between months; however, there was a significant difference between aged and newly introduced pellets.
Related Results
Determination of Length of Individual Pellets and Pellets’ Lengths Distribution
Determination of Length of Individual Pellets and Pellets’ Lengths Distribution
A form and dimensions of fuel particles influence the intensity of their burning and approaches to the mathematic description of the process. Known methods do not allow correctly m...
Release characteristics of drug having different solubilities from matrix pellets containing glycerides
Release characteristics of drug having different solubilities from matrix pellets containing glycerides
The release properties of having different solubilities (propranolol hydrochloride and diclofenac sodium) from the glycerides matrix pellets were investigated. The pellets were pre...
Carbon burnout from the char of a single cylindrical pellet
Carbon burnout from the char of a single cylindrical pellet
In countries with limited wood fuel resources, the use of straw for energy should be increased to comply with environmental commitments. Boiler houses burning whole straw bales hav...
Properties of Wood–Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets
Properties of Wood–Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets
Driven by the motive of minimizing the transportation costs of raw materials to manufacture wood–plastic composites (WPCs), Part I and the current Part II of this paper series expl...
CHEMOTACTOMETER AND GLUE TRAP BIOASSAYS TO EVALUATE PELLET BAITS TO LURE HOUSE FLIES
CHEMOTACTOMETER AND GLUE TRAP BIOASSAYS TO EVALUATE PELLET BAITS TO LURE HOUSE FLIES
Different pellet baits were prepared and evaluated for their efficacy to lure house flies in chemotactometer and glue trap bioassays. Pellets with fish meal alone (FM), fish meal +...
MUPS Tableting—Comparison between Crospovidone and Microcrystalline Cellulose Core Pellets
MUPS Tableting—Comparison between Crospovidone and Microcrystalline Cellulose Core Pellets
Multi-unit pellet system (MUPS) tablets were fabricated by compacting drug-loaded pellets of either crospovidone or microcrystalline cellulose core. These pellets were produced by ...
UTILIZAÇÃO DA BIOMASSA RESIDUAL IN NATURA E TORRIFICADA DE BAMBU E EUCALIPTO PARA PRODUÇÃO DE PELLETS
UTILIZAÇÃO DA BIOMASSA RESIDUAL IN NATURA E TORRIFICADA DE BAMBU E EUCALIPTO PARA PRODUÇÃO DE PELLETS
Os resíduos de origem florestal são uma importante fonte de biomassa para uso energético. Uma das formas de aproveitamento é a produção de pellets, na qual o material passa por um ...
Optimizing calliandra (Calliandra calothyrsus) biomass pellets: Impact of particle size and bark composition
Optimizing calliandra (Calliandra calothyrsus) biomass pellets: Impact of particle size and bark composition
Calliandra biomass pellets offer a promising alternative energy source to replace fossil fuels. Typically, these pellets are produced by directly processing the stem and bark of th...

