Javascript must be enabled to continue!
Design of a wave energy converter based on Halbach magnetic array
View through CrossRef
With the continuous development of society and economy, people’s demand for electric energy is increasing. The low-carbon and energy-saving technologies of renewable energy especially wave energy have become the focus of current researches. Considering the increasingly serious energy problems, a wave energy converter (WEC) is proposed based on Halbach permanent magnetic array, which increases the output performance. The equivalent magnetic circuit model of the WEC is established. The static magnetic field modeling and structural parameters optimal permanent of the WEC are performed on this theoretical. Theoretical studies have found that the optimal permanent magnet thickness ratios for Halbach permanent magnet array structures is 0.6, and the ratio of permanent magnet to coil radial ratio is 0.7. The coil winding form and rectifying circuit of the WEC were designed. The WEC equivalent magnetic circuit model was verified by COMSOL Multiphysics finite element software, and the open circuit voltages of WEC was obtained. If the WEC moves at a speed of 0.1 m/s, the coil voltage can reach about 113 V after simulation. According to the testing requirements of the WEC, a test platform was built. The Halbach permanent magnet array structures greatly enhances the wave energy collection of WEC.
Title: Design of a wave energy converter based on Halbach magnetic array
Description:
With the continuous development of society and economy, people’s demand for electric energy is increasing.
The low-carbon and energy-saving technologies of renewable energy especially wave energy have become the focus of current researches.
Considering the increasingly serious energy problems, a wave energy converter (WEC) is proposed based on Halbach permanent magnetic array, which increases the output performance.
The equivalent magnetic circuit model of the WEC is established.
The static magnetic field modeling and structural parameters optimal permanent of the WEC are performed on this theoretical.
Theoretical studies have found that the optimal permanent magnet thickness ratios for Halbach permanent magnet array structures is 0.
6, and the ratio of permanent magnet to coil radial ratio is 0.
7.
The coil winding form and rectifying circuit of the WEC were designed.
The WEC equivalent magnetic circuit model was verified by COMSOL Multiphysics finite element software, and the open circuit voltages of WEC was obtained.
If the WEC moves at a speed of 0.
1 m/s, the coil voltage can reach about 113 V after simulation.
According to the testing requirements of the WEC, a test platform was built.
The Halbach permanent magnet array structures greatly enhances the wave energy collection of WEC.
Related Results
Hurricane Eloise Directional Wave Energy Spectra
Hurricane Eloise Directional Wave Energy Spectra
ABSTRACT
Directiona1 wave energy spectra, calculated from data recorded during Hurricane Eloise (Gulf of Mexico, 1975), are presented. The spectra, based on an en...
Magnetic cloak made of NdFeB permanent magnetic material
Magnetic cloak made of NdFeB permanent magnetic material
In the past few years, the concept of an electromagnetic invisibility cloak has received much attention. Based on the pioneering theoretical work, invisibility cloaks have been gre...
Design and Simulation Converter with Buck-boost Converter as The Voltage Stabilizer
Design and Simulation Converter with Buck-boost Converter as The Voltage Stabilizer
Buck-boost Converter is the device with the function to convert DC Voltage input to the setpoint DC Voltage output. Buck-boost converter can be used for regulating unstable voltage...
A Single‐Stage Isolated Battery Charger Using Nonbridged Positive Cuk Converter Configuration
A Single‐Stage Isolated Battery Charger Using Nonbridged Positive Cuk Converter Configuration
This article presents a nonbridged isolated positive Cuk (NB‐IPCuk) converter‐based single‐stage battery charging system (SSBCS). The architecture of the suggested charger ensures ...
Katalis Plat Kuningan Berbentuk Sarang Lebah untuk Mengurangi Emisi Kendaraan Bermotor
Katalis Plat Kuningan Berbentuk Sarang Lebah untuk Mengurangi Emisi Kendaraan Bermotor
Meningkatnya jumlah kendaraan bermotor berdampak langsung terhadap pencemaran udara akibat gas buang. Pencemaran udara di perkotaan didominasi oleh emisi kendaraan bermotor, disert...
SIMULATION OF THE INTERACTION OF MAGNETIC ASSEMBLIES OF THE "KARUSEL" LEVITATING MILKING PLATFORM
SIMULATION OF THE INTERACTION OF MAGNETIC ASSEMBLIES OF THE "KARUSEL" LEVITATING MILKING PLATFORM
On large dairy farms of 1,200 heads or more, milking machines of the "Karusel" type with a capacity of 40 to 90 milking places have become the most widespread. Th...
Design of Buck Converter Based on Maximum Power Point Tracking for Photovoltaic Applications
Design of Buck Converter Based on Maximum Power Point Tracking for Photovoltaic Applications
e MPPT converter ensures that the PV system operates at the maximum power point, which is the point where the solar panels can generate the most power. This is done by adjusting th...
Design of coaxial magnetic gear utilising a novel permanent magnet Halbach array structure
Design of coaxial magnetic gear utilising a novel permanent magnet Halbach array structure
Abstract
Mechanical gears are constrained due to wear and tear and call for lubrication. A magnetic gear, utilising permanent magnet (PM) arrays, facilitates the ...

