Javascript must be enabled to continue!
ROCKS – SEGNETOELASTICS
View through CrossRef
Purpose. Identification of the features and the properties of segnetoelastics in rocks. Research Methods. Laboratory experiments on the deformation of rocks in a volume field of compressive stresses, macro- and microscopic studies of the deformations and the orientations of an optical indicatrix, analysis of the data obtained. Research results. As a result of microscopic and optical studies of rocks in thin sections on a polarizing microscope, tests of rocks under the conditions of unequal triaxial compression, analysis of the results obtained, it was found that the rock-forming minerals of the sedimentary sequence at a normal temperature and in the absence of an external load have a domain structure. Under the conditions of a triaxial unequal component compression, the volumetric deformations at the micro and macro levels do not exceed hundredths, while the relative micro deformations fully correspond to the dilatancy volume at the macro level. Shear rotational deformations reach 15–20%, their resonant increment increases several times over three periods before the destruction. During the loading, the direction of the rotation is changed 3-4 or more times, an optical indicatrix changes the direction. All deformations are alternating in sign and, until resonance, the amplitude of their increment does not exceed 0.5%. During the loading, the deformation, elastic, optical, electromagnetic, and other parameters are changed abruptly (structural-phase transitions of the second, and upon the destruction, of the first and third kind). The interconnection between the load and the deformations is nonlinear, a number of characteristic deformations are distinguished at which these jumps occur. All said indicate that rocks are classical distortion segnetoelastics. The following parameters can be taken as parameters of a segnoelastic transition: the value or increase in the value of relative deformation; an elastic modules varying within ± ∞; the sign and the magnitude of the increment of the Lode angle for the deformations; the angle of rotation of the optical indicatrix, the presence of structural-phase transitions in the minerals. Scientific novelty. It has been shown for the first time that all five signs and traits of segnetoelastics are present in sedimentary rocks. Practical significance. The possibility for isolating of segnetoelastics without laborious microscopic and electromagnetic studies.
Donetsk National Technical University
Title: ROCKS – SEGNETOELASTICS
Description:
Purpose.
Identification of the features and the properties of segnetoelastics in rocks.
Research Methods.
Laboratory experiments on the deformation of rocks in a volume field of compressive stresses, macro- and microscopic studies of the deformations and the orientations of an optical indicatrix, analysis of the data obtained.
Research results.
As a result of microscopic and optical studies of rocks in thin sections on a polarizing microscope, tests of rocks under the conditions of unequal triaxial compression, analysis of the results obtained, it was found that the rock-forming minerals of the sedimentary sequence at a normal temperature and in the absence of an external load have a domain structure.
Under the conditions of a triaxial unequal component compression, the volumetric deformations at the micro and macro levels do not exceed hundredths, while the relative micro deformations fully correspond to the dilatancy volume at the macro level.
Shear rotational deformations reach 15–20%, their resonant increment increases several times over three periods before the destruction.
During the loading, the direction of the rotation is changed 3-4 or more times, an optical indicatrix changes the direction.
All deformations are alternating in sign and, until resonance, the amplitude of their increment does not exceed 0.
5%.
During the loading, the deformation, elastic, optical, electromagnetic, and other parameters are changed abruptly (structural-phase transitions of the second, and upon the destruction, of the first and third kind).
The interconnection between the load and the deformations is nonlinear, a number of characteristic deformations are distinguished at which these jumps occur.
All said indicate that rocks are classical distortion segnetoelastics.
The following parameters can be taken as parameters of a segnoelastic transition: the value or increase in the value of relative deformation; an elastic modules varying within ± ∞; the sign and the magnitude of the increment of the Lode angle for the deformations; the angle of rotation of the optical indicatrix, the presence of structural-phase transitions in the minerals.
Scientific novelty.
It has been shown for the first time that all five signs and traits of segnetoelastics are present in sedimentary rocks.
Practical significance.
The possibility for isolating of segnetoelastics without laborious microscopic and electromagnetic studies.
Related Results
Differences in Geochemical Signatures and Petrogenesis between the Van Canh and Ben Giang-Que Son Granitic Rocks in the Southern Kontum Massif, Vietnam
Differences in Geochemical Signatures and Petrogenesis between the Van Canh and Ben Giang-Que Son Granitic Rocks in the Southern Kontum Massif, Vietnam
Permian Ben Giang-Que Son and Triassic Van Canh granitic rocks are widely distributed across the southern Kontum Massif, the basement of which consists mainly of metasedimentary ro...
SIMPLE FORMS OF ZIRCON CRYSTALS FROM CRYSTALLINE ROCKS OF THE UKRAINIAN SHIELD AND THEIR MORPHOLOGICAL TYPES
SIMPLE FORMS OF ZIRCON CRYSTALS FROM CRYSTALLINE ROCKS OF THE UKRAINIAN SHIELD AND THEIR MORPHOLOGICAL TYPES
The main basics in geometric crystallography of zircon, developed by many researchers in the 18th - 20th centuries, are briefly described. The data of goniometric study of zircon f...
Three-dimensional Morphological Analysis of Martian Rocks Using Zhurong Rover NaTeCam Images
Three-dimensional Morphological Analysis of Martian Rocks Using Zhurong Rover NaTeCam Images
This research delves into the three-dimensional (3D) morphological characteristics of Martian rocks, utilizing high-resolution images captured by the NaTeCam of China's Zhurong rov...
Provenance Characteristics and Tectonic Implication of the Laiyang Group in Lingshan Island of Riqingwei Basin
Provenance Characteristics and Tectonic Implication of the Laiyang Group in Lingshan Island of Riqingwei Basin
Provenance Characteristics and Tectonic Implication of the Laiyang Group in Lingshan Island of Riqingwei BasinJIANG, Yushen and ZHOU, Yaoqi, China University of Petroleum (east)Abs...
Petrologic and REE Geochemical Characters of Burnt Rocks
Petrologic and REE Geochemical Characters of Burnt Rocks
Abstract: The study of burnt rocks is beneficial to the discussion on the tectonic movement, paleoclimate and paleogeography that coal seams are subjected to after they were formed...
Natural Gases of North America, Volumes 1 & 2
Natural Gases of North America, Volumes 1 & 2
Abstract
Discoveries of natural gas in Alaska have resulted from the search for oil, which has continued intermittently since about 1898. In northern Alaska two gas ...
Hydrydrocarbon Generetion & Natural Gas Accumulation In The Southern Margin Of Junggar Basin
Hydrydrocarbon Generetion & Natural Gas Accumulation In The Southern Margin Of Junggar Basin
Abstract
1. In the southern margin area, four sets of source rocks including Permian, Jurassic, Cretaceous and Tertiary source rocks are developed, and their dist...
Mineralogy
Mineralogy
Soils are weathering products of rocks and minerals. The rocks in Earth’s outer surface can be classified as igneous, sedimentary, or metamorphic rocks. Igneous rocks are formed fr...

