Javascript must be enabled to continue!
Insights into deformation mechanisms of exhuming brittle-ductile shear zones (Oman Mountains)
View through CrossRef
Exhuming shear zones are key structures in the dynamic evolution of orogens. Such shear zones accommodate most of the shear-related exhumation within relatively small rock volumes. This is possible due to major strain partitioning occurring along weak rocks, frequently represented by phyllosilicate-rich rocks. Thus, the study of phyllosilicate-rich mylonites can provide fundamental insights into exhumation mechanisms responsible for the architecture of orogens.The Hulw Shear Zone in the Saih Hatat Window of Oman (Agard et al., 2010) is one of these exhuming shear zones juxtaposing two subducted continental tectonic units. This tectonic contact experienced sustained shearing, accommodating a delta pressure of circa 0.8 GPa between 1.2 and 0.4 GPa at a relatively constant temperature of circa 400 °C (Petroccia et al., 2025) between 77 and 74 Ma (Ring et al., 2024).In the field, micaschist belonging to the footwall displays a strain gradient moving toward the contact with the hanging wall, corresponding to a development of a S-C-C’ fabric and a modal enrichment in K-rich white mica and pyrophyllite matched by a progressive increase in the physical interconnectivity of these phyllosilicates. Microstructural analysis suggests that interconnected C planes were formed due to an interplay of fracturing allowing fluid to preferentially flow along the newly formed fractures and precipitating phyllosilicates, and preferential grain boundary sliding and glide of the quartz-phyllosilicate grain boundaries, with additional precipitation of new phyllosilicates in dilatant sites.Hyperspectral cathodoluminescence highlights different luminescence for the larger (several hundreds of µm) detrital quartz grains, producing a bright signal and containing yielded cracks, and smaller equant quartz grains (less than 70 µm), darker in cathodoluminescence and devoid of cracks. Electron backscatter diffraction analyses suggest that large quartz grains experienced grain size reduction by subgrain rotation recrystallization to form smaller equant grains. Interconnected chains of small quartz grains are located in contact with the phyllosilicates, suggesting preferential recrystallization along these planes.Transmission Electron Microscope analyses highlight pyrophyllite-muscovite intergrowths at the submicron scale as small as 300-500 nm, with truncated boundaries likely reflecting dissolution and precipitation mechanisms. Muscovite and pyrophyllite appear to deform differently, suggesting that strain partitioning occurred down to the submicron scale.Summarising, these results suggest that strain localization and weakening of this rock volume was achieved by an interplay of the following mechanisms: I) diffuse microcracking and subgrain rotation recrystallization leading to a finer grain size of quartz, II) synkinematic nucleation of retrograde mineral phases along discrete C and C’ planes, III) preferential recrystallization along the shear planes and IV) dissolution and precipitation processes of phyllosilicates. Concluding, this intimate and polyphase interplay between deformation and metamorphism is responsible for the formation and evolution of exhuming shear zones and the related structure of orogens. Giuntoli acknowledges financial support of grant N° MUR 2022X88W2Y _002. ReferencesAgard, et al., (2010). Tectonics, 29(5). https://doi.org/10.1029/2010TC002669Petroccia, et al., (2025). Journal of Structural Geology, 191. https://doi.org/10.1016/j.jsg.2024.105328Ring, et al., (2024). Earth-Science Reviews, 250, 104711. https://doi.org/https://doi.org/10.1016/j.earscirev.2024.104711
Title: Insights into deformation mechanisms of exhuming brittle-ductile shear zones (Oman Mountains)
Description:
Exhuming shear zones are key structures in the dynamic evolution of orogens.
Such shear zones accommodate most of the shear-related exhumation within relatively small rock volumes.
This is possible due to major strain partitioning occurring along weak rocks, frequently represented by phyllosilicate-rich rocks.
Thus, the study of phyllosilicate-rich mylonites can provide fundamental insights into exhumation mechanisms responsible for the architecture of orogens.
The Hulw Shear Zone in the Saih Hatat Window of Oman (Agard et al.
, 2010) is one of these exhuming shear zones juxtaposing two subducted continental tectonic units.
This tectonic contact experienced sustained shearing, accommodating a delta pressure of circa 0.
8 GPa between 1.
2 and 0.
4 GPa at a relatively constant temperature of circa 400 °C (Petroccia et al.
, 2025) between 77 and 74 Ma (Ring et al.
, 2024).
In the field, micaschist belonging to the footwall displays a strain gradient moving toward the contact with the hanging wall, corresponding to a development of a S-C-C’ fabric and a modal enrichment in K-rich white mica and pyrophyllite matched by a progressive increase in the physical interconnectivity of these phyllosilicates.
Microstructural analysis suggests that interconnected C planes were formed due to an interplay of fracturing allowing fluid to preferentially flow along the newly formed fractures and precipitating phyllosilicates, and preferential grain boundary sliding and glide of the quartz-phyllosilicate grain boundaries, with additional precipitation of new phyllosilicates in dilatant sites.
Hyperspectral cathodoluminescence highlights different luminescence for the larger (several hundreds of µm) detrital quartz grains, producing a bright signal and containing yielded cracks, and smaller equant quartz grains (less than 70 µm), darker in cathodoluminescence and devoid of cracks.
Electron backscatter diffraction analyses suggest that large quartz grains experienced grain size reduction by subgrain rotation recrystallization to form smaller equant grains.
Interconnected chains of small quartz grains are located in contact with the phyllosilicates, suggesting preferential recrystallization along these planes.
Transmission Electron Microscope analyses highlight pyrophyllite-muscovite intergrowths at the submicron scale as small as 300-500 nm, with truncated boundaries likely reflecting dissolution and precipitation mechanisms.
Muscovite and pyrophyllite appear to deform differently, suggesting that strain partitioning occurred down to the submicron scale.
Summarising, these results suggest that strain localization and weakening of this rock volume was achieved by an interplay of the following mechanisms: I) diffuse microcracking and subgrain rotation recrystallization leading to a finer grain size of quartz, II) synkinematic nucleation of retrograde mineral phases along discrete C and C’ planes, III) preferential recrystallization along the shear planes and IV) dissolution and precipitation processes of phyllosilicates.
Concluding, this intimate and polyphase interplay between deformation and metamorphism is responsible for the formation and evolution of exhuming shear zones and the related structure of orogens.
Giuntoli acknowledges financial support of grant N° MUR 2022X88W2Y _002.
ReferencesAgard, et al.
, (2010).
Tectonics, 29(5).
https://doi.
org/10.
1029/2010TC002669Petroccia, et al.
, (2025).
Journal of Structural Geology, 191.
https://doi.
org/10.
1016/j.
jsg.
2024.
105328Ring, et al.
, (2024).
Earth-Science Reviews, 250, 104711.
https://doi.
org/https://doi.
org/10.
1016/j.
earscirev.
2024.
104711 .
Related Results
Ductile to brittle tectonic evolution of the Achankovil Shear Zone, Southern Granulite Terrane – Constraints from statistical analysis of fabric and paleostress inversion
Ductile to brittle tectonic evolution of the Achankovil Shear Zone, Southern Granulite Terrane – Constraints from statistical analysis of fabric and paleostress inversion
The Achankovil Shear zone (AKSZ), juxtaposing the Trivandrum Granulite Block (TB) and the Madurai Granulite Block (MB) of the Southern Granulite Terrane (SGT), represents a paleo-s...
Shear-Dominated Fracture of Ductile Metal Under Mixed Loading and Preliminary Assessment
Shear-Dominated Fracture of Ductile Metal Under Mixed Loading and Preliminary Assessment
At room temperature, fracture of ductile metal often appears ductile, which is thought as the result of nucleation, dilatation and coalescence of microvoids in material. The remnan...
Ductile shear zones – future perspectives
Ductile shear zones – future perspectives
<p>About 50 years ago, John Ramsay and colleagues established the thorough foundation for the field-scale observational and mathematical description of the structures...
The record of ductile strain by Raman spectroscopy of carbonaceous material – deformation experiments and applications to the brittle-ductile régime
The record of ductile strain by Raman spectroscopy of carbonaceous material – deformation experiments and applications to the brittle-ductile régime
Raman spectroscopy on carbonaceous material (RSCM) is a method widely used to infer the temperature of metamorphism in metasediments. Furthermore, anomalies in the Raman signature ...
Phyllosilicates do their job: insights into their role in exhuming subducted continental units
Phyllosilicates do their job: insights into their role in exhuming subducted continental units
Exhuming shear zones are key structures in the dynamic evolution of orogens. Such shear zones accommodate most of the shear-related exhumation within relatively small rock-volumes....
Simple shear is not so simple! Kinematics and shear senses in Newtonian viscous simple shear zones
Simple shear is not so simple! Kinematics and shear senses in Newtonian viscous simple shear zones
AbstractThis work develops an analytical model of shear senses within an inclined ductile simple shear zone with parallel rigid boundaries and incompressible Newtonian viscous rheo...
Optimization of magnetoelectricity in thickness shear mode LiNbO3/magnetostrictive laminated composite
Optimization of magnetoelectricity in thickness shear mode LiNbO3/magnetostrictive laminated composite
Magnetoelectric (ME) composites have recently attracted much attention and triggered a great number of research activities, owing to their potential applications in sensors and tra...
Internal architecture of the frontal part of subduction accretionary prism: the role of folding in brittle diffuse deformation
Internal architecture of the frontal part of subduction accretionary prism: the role of folding in brittle diffuse deformation
Studies of the shallow part (Tmax< 150°C) of ancient and active prisms documents that ductile (e.g., folds), brittle and localized (e.g., faults) deformation, and diffu...

