Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Imaging flow focusing and isolation of aqueous fluids in synthetic quartzite: implications for permeability and retained fluid fraction in deep-seated rocks

View through CrossRef
AbstractThe microstructure of realistic fluid–rock systems evolves to minimize the overall interfacial energy, enabling local variations in fluid geometry beyond ideal models. Consequently, the permeability–porosity relationship and fluid distribution in these systems may deviate from theoretical expectations. Here, we aimed to better understand the permeability development and fluid retention in deep-seated rocks at low fluid fractions by using a combined approach of high-resolution synchrotron radiation X-ray computed microtomography imaging of synthesized rocks and numerical permeability computation. We first synthesized quartzite using a piston-cylinder apparatus at different fluid fractions and wetting properties (wetting and non-wetting systems with dihedral angles of 52° and 61°–71°, respectively) under conditions of efficient grain growth. Although all fluids should be connected along grain edges and tubules in the homogeneous isotropic wetting fluid–rock system enabling segregation by gravitational compaction in natural settings, the fluid connectivity rapidly decreased to ~ 0 when the total fluid fraction decreased to 0.030–0.037, as the non-ideality of quartzite, including the interfacial energy anisotropy (i.e., grain faceting), became critical. In non-wetting systems, where the minimum energy fluid fraction based solely on the dihedral angle is ~ 0.015–0.035, the isolated (disconnected) fractions was 0.048–0.062. A streamline computation in the non-wetting system revealed that with decreasing total porosity, flow focusing into fewer channels maintained permeability, allowing the effective segregation of the connected fluids. These results provide insight into how non-wetting fluids segregate from rocks and exemplify the fraction of retained fluids in non-wetting systems. Thus, the findings suggest a potential way for wetting system fluids to be transported into the deep Earth's interior, and the amount of fluids dragged down to the Earth’s interior could be higher than what was previously estimated.
Title: Imaging flow focusing and isolation of aqueous fluids in synthetic quartzite: implications for permeability and retained fluid fraction in deep-seated rocks
Description:
AbstractThe microstructure of realistic fluid–rock systems evolves to minimize the overall interfacial energy, enabling local variations in fluid geometry beyond ideal models.
Consequently, the permeability–porosity relationship and fluid distribution in these systems may deviate from theoretical expectations.
Here, we aimed to better understand the permeability development and fluid retention in deep-seated rocks at low fluid fractions by using a combined approach of high-resolution synchrotron radiation X-ray computed microtomography imaging of synthesized rocks and numerical permeability computation.
We first synthesized quartzite using a piston-cylinder apparatus at different fluid fractions and wetting properties (wetting and non-wetting systems with dihedral angles of 52° and 61°–71°, respectively) under conditions of efficient grain growth.
Although all fluids should be connected along grain edges and tubules in the homogeneous isotropic wetting fluid–rock system enabling segregation by gravitational compaction in natural settings, the fluid connectivity rapidly decreased to ~ 0 when the total fluid fraction decreased to 0.
030–0.
037, as the non-ideality of quartzite, including the interfacial energy anisotropy (i.
e.
, grain faceting), became critical.
In non-wetting systems, where the minimum energy fluid fraction based solely on the dihedral angle is ~ 0.
015–0.
035, the isolated (disconnected) fractions was 0.
048–0.
062.
A streamline computation in the non-wetting system revealed that with decreasing total porosity, flow focusing into fewer channels maintained permeability, allowing the effective segregation of the connected fluids.
These results provide insight into how non-wetting fluids segregate from rocks and exemplify the fraction of retained fluids in non-wetting systems.
Thus, the findings suggest a potential way for wetting system fluids to be transported into the deep Earth's interior, and the amount of fluids dragged down to the Earth’s interior could be higher than what was previously estimated.

Related Results

Fluid segregation and retention in deep‑seated rocks near percolation thresholds
Fluid segregation and retention in deep‑seated rocks near percolation thresholds
Fluid segregation in deep-seated rocks has profound implications for their physical and chemical properties. Gravity drives the segregation of fluids interconnected through grain e...
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Drilling in deeper formations and in high pressure and high temperature (HPHT) environments is a new frontier for the oil industry. Fifty years ago, no one would have imagined dril...
Permeability Prediction for Carbonates: Still a Challenge?
Permeability Prediction for Carbonates: Still a Challenge?
Abstract Permeability estimation for a well and mapping it for a field are extremely critical and difficult tasks in hydrocarbon exploration and production. Diffe...
The Effect of Fracturing Fluid Leak-off On the Productivity of High Permeability Oil Reservoirs
The Effect of Fracturing Fluid Leak-off On the Productivity of High Permeability Oil Reservoirs
Abstract During fracturing of high permeability reservoirs hydraulically there is always a concern that fracturing fluid leak-off may cause a reduction in permeab...
Developing a Proficient Relative Permeability Resource From Historical Data
Developing a Proficient Relative Permeability Resource From Historical Data
Abstract Having reliable and readily accessible relative permeability information is a problem for many reservoir engineers. In the absence of laboratory measured...
Porosity microstructures of a sandstone affected by a normal fault
Porosity microstructures of a sandstone affected by a normal fault
Abstract Introduction – Normal faults are part of the elements that control fluid flows in sedimentary basins. They can play the role of a barrier or a drain [Hipple...
Study on Physical Simulation Experimental Technology of Ultra-low Permeability Large-scale Outcrop Model
Study on Physical Simulation Experimental Technology of Ultra-low Permeability Large-scale Outcrop Model
Abstract Ultra-low permeability reserves have accounted for a very large proportion of China's proven reserves and undeveloped reserves at present, so it is very ...

Back to Top