Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Evaluation of an Oxygen Transport Coefficient in the Aditya Tokamak Using the Radial Profile of O4+ Emissivity and the Importance of Atomic Data Used Therein

View through CrossRef
Oxygen impurity transport in the typical discharges of the Aditya tokamak was investigated using emissivity radial profile of emissivity of the spectral line (2p3p 3D3–2p3d 3F4) at 650.024 nm from the Be-like oxygen ion. This O4+ spectral line was recorded using a 1.0 m multi-track spectrometer capable of simultaneous measurements from eight lines of sight passing through the plasma. The oxygen transport coefficients were determined by reproducing the experimentally measured emissivity profiles of O4+, using a one-dimensional impurity transport code, STRAHL, and photon emissivity coefficient (PEC) belonging to that transition. The PEC values were obtained from both ADAS and NIFS atomic databases. Using both the databases, much higher values of diffusion coefficients compared to the neo-classical values were observed in both high and low magnetic field edge regions of typical Aditya tokamak Ohmic plasma. Although, almost similar profiles of diffusion coefficients were obtained using PEC values from both databases, the magnitude differs considerably. The maximum values of diffusion coefficients in the plasma edge at low field side of tokamak were ~45 and ~25 m2·s−1 when modeling was done using the ADAS and NIFS databases, respectively. Further analysis on the atomic data used in the calculation indicates that the difference in diffusion coefficients is mainly related to the variation in the values of atomic data of the two databases.
Title: Evaluation of an Oxygen Transport Coefficient in the Aditya Tokamak Using the Radial Profile of O4+ Emissivity and the Importance of Atomic Data Used Therein
Description:
Oxygen impurity transport in the typical discharges of the Aditya tokamak was investigated using emissivity radial profile of emissivity of the spectral line (2p3p 3D3–2p3d 3F4) at 650.
024 nm from the Be-like oxygen ion.
This O4+ spectral line was recorded using a 1.
0 m multi-track spectrometer capable of simultaneous measurements from eight lines of sight passing through the plasma.
The oxygen transport coefficients were determined by reproducing the experimentally measured emissivity profiles of O4+, using a one-dimensional impurity transport code, STRAHL, and photon emissivity coefficient (PEC) belonging to that transition.
The PEC values were obtained from both ADAS and NIFS atomic databases.
Using both the databases, much higher values of diffusion coefficients compared to the neo-classical values were observed in both high and low magnetic field edge regions of typical Aditya tokamak Ohmic plasma.
Although, almost similar profiles of diffusion coefficients were obtained using PEC values from both databases, the magnitude differs considerably.
The maximum values of diffusion coefficients in the plasma edge at low field side of tokamak were ~45 and ~25 m2·s−1 when modeling was done using the ADAS and NIFS databases, respectively.
Further analysis on the atomic data used in the calculation indicates that the difference in diffusion coefficients is mainly related to the variation in the values of atomic data of the two databases.

Related Results

Conceptual design and preliminary data analysis for classification of plasma disruption event at Aditya-U tokamak
Conceptual design and preliminary data analysis for classification of plasma disruption event at Aditya-U tokamak
Disruption prediction and its avoidance/mitigation is an essential part of the tokamak operations, particularly for large size tokamak as the disruptions could produce very large h...
Determining the Emissivity of Roofing Samples: Asphalt, Ceramic and Coated Cedar
Determining the Emissivity of Roofing Samples: Asphalt, Ceramic and Coated Cedar
The goal is to perform heat measurements examine of selected roofing material samples. Those roofing materials are asphalt shingles, ceramics, and cedar. It’s important to understa...
Apparent Emissivity of Combustion Soot Aggregate Coating at High Temperature
Apparent Emissivity of Combustion Soot Aggregate Coating at High Temperature
Soot aggregates frequently occur during combustion or pyrolysis of fuels. The radiative properties of soot aggregates at high temperature are important for understanding soot chara...
Effect of Emissivity on Wall Temperature of Air Frames
Effect of Emissivity on Wall Temperature of Air Frames
Abstract This study explores the influence of emissivity on the surface temperature of airframes under transient thermal conditions, employing ANSYS APDL for simulation. Th...
Venus surface temperature derived from VIRTIS on Venus Express in comparison to the Venus Climate Database
Venus surface temperature derived from VIRTIS on Venus Express in comparison to the Venus Climate Database
The temperature and dynamics of the planetary boundary layer (PBL), i.e. the atmosphere closest to the surface, are important to many aspects of Venus science. The characteristics ...
Physics studies of ADITYA & ADITYA-U tokamak plasmas using spectroscopic diagnostics
Physics studies of ADITYA & ADITYA-U tokamak plasmas using spectroscopic diagnostics
Abstract Several spectroscopic diagnostics encompassing the spectral emission range from the x-ray to near infrared (NIR) have been developed, installed and operated...
Stabilized C1-bicubic finite element method for nonlinear MHD modeling of tokamak plasma
Stabilized C1-bicubic finite element method for nonlinear MHD modeling of tokamak plasma
Méthode d'éléments finis C1-bicubique stabilisée pour la modélisation MHD non linéaire du plasma de tokamak Le tokamak est l’un des systèmes prometteurs mis au poin...

Back to Top