Impact on concrete properties using e-plastic waste fine aggregates and silica fume

Plastic obtained from the discarded computers, televisions, refrigerators, and other electronic devices is termed as e-plastic waste. E-plastic waste is non-biodegradable waste. This paper focuses to investigate the replacement of fine aggregate with plastic aggregate obtained from e-plastic. The paper presents a detailed comparison of concrete properties (i.e.: compressive strength, tensile strength, flexural strength, density and workability) for normal concrete and concrete containing e-plastic fine aggregates. The testing was conducted according to the ASTM standards. 28-day Compressive, Flexural and Split tensile strengths were determined. In addition to the effect of e-plastic fine aggregate, silica fume is added as an admixture to find the effect on strengths. Authors have performed a compressive, flexural and tensile test of concrete mix with various percentages of e-plastic aggregates (i.e., 0, 5, 10, 15 and 20%) and silica fume (i.e.: 0, 5 and 10%) and concrete densities are also considered. It has been concluded that an increase in the e-plastic fine aggregate results in reduction in densities, compressive, flexural and tensile strength values. However, when we add silica fume to the concrete mixture it leads to strength values similar to the control mixture. The optimum obtained concrete blend contained 5% e-plastic fine aggregates and 10% silica fume. The addition of silica fume in concrete mixtures increases the 28-day compressive, flexural and tensile strengths. Moreover, the density of concrete decreases with the increase in the e-plastic aggregates.