Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
The morphologies and characteristics of reactively formed TaSi2 films
View through CrossRef
Morphologies and characteristics of the surface and interface of TaSi2/Si and TaSi2/poly-Si structures reactively formed by furnace annealing and rapid thermal annealing (RTA) have been investigated thoroughly. Scanning electron microscopy and transmission electron microscopy (cross section) results show that the morphologies of the annealed samples were uneven, but the surface and interface of RTA samples were better than that of furnace annealed samples. The specific contact resistivity of TaSi2 to n+ -Si substrates with Kelvin structure was measured. The contact resistivity increased as the annealing temperature increased, but was lower for RTA samples than for furnace annealed samples. Sheet resistance measurement, x-ray diffraction, and Auger electron spectroscopy analysis techniques were used to monitor the formation of TaSi2 films.
Title: The morphologies and characteristics of reactively formed TaSi2 films
Description:
Morphologies and characteristics of the surface and interface of TaSi2/Si and TaSi2/poly-Si structures reactively formed by furnace annealing and rapid thermal annealing (RTA) have been investigated thoroughly.
Scanning electron microscopy and transmission electron microscopy (cross section) results show that the morphologies of the annealed samples were uneven, but the surface and interface of RTA samples were better than that of furnace annealed samples.
The specific contact resistivity of TaSi2 to n+ -Si substrates with Kelvin structure was measured.
The contact resistivity increased as the annealing temperature increased, but was lower for RTA samples than for furnace annealed samples.
Sheet resistance measurement, x-ray diffraction, and Auger electron spectroscopy analysis techniques were used to monitor the formation of TaSi2 films.
Related Results
Effect of In Situ Grown SiC Nanowires on the Pressureless Sintering of Heterophase Ceramics TaSi2-TaC-SiC
Effect of In Situ Grown SiC Nanowires on the Pressureless Sintering of Heterophase Ceramics TaSi2-TaC-SiC
To ascertain the influence of SiC nanowires on sintering kinetics of heterophase ceramics, two composite powders (TaSi2-TaC-SiC and TaSi2-TaC-SiC-SiCnanowire) are fabricated by mec...
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Phillip Noyce is one of Australia’s most prominent film makers—a successful feature film director with both iconic Australian narratives and many a Hollywood blockbuster under his ...
Metal-dopant-compound formation in TiSi2 and TaSi2: Impact on dopant diffusion and contact resistance
Metal-dopant-compound formation in TiSi2 and TaSi2: Impact on dopant diffusion and contact resistance
The refractory metal disilicides TiSi2 and TaSi2 were investigated for their usefulness as dopant diffusion sources. During furnace annealing and rapid thermal processing, strong d...
Desarrollo de nuevas estructuras laminares de nanocelulosa con propiedades avanzadas para el packaging
Desarrollo de nuevas estructuras laminares de nanocelulosa con propiedades avanzadas para el packaging
(English) Changes in the use of raw materials and major lifestyle changes in first world societies have driven the massive use of petroleum-based materials in a wide range of appli...
Spray Coated Nanocellulose Films Productions, Characterization and Application
Spray Coated Nanocellulose Films Productions, Characterization and Application
Nanocellulose (NC) is a biodegradable, renewable and sustainable material. It has strong potential to use as a functional material in various applications such as barriers, coating...
Diary of a Film Reviewer
Diary of a Film Reviewer
All critics declare not only their judgment of the work but also their claim to the right to talk about it and judge it. In short, they take part in...
Preparation and characterization of nanocomposites based on polylactide manufactured by reactive extrusion-calendering : thermal, rheological, mechanical and fracture properties
Preparation and characterization of nanocomposites based on polylactide manufactured by reactive extrusion-calendering : thermal, rheological, mechanical and fracture properties
PLA nanocomposites sheets that is rnodified with multi-functional epoxide reactive agent (Joncryi4300F, BASF, Germany) were manufacturad using reactive extrusion in a pilot plant. ...
Etude de films ultraminces de polystyrène par réflectivité des rayons X et ellipsométrie en fonction de leur exposition à du CO2
Etude de films ultraminces de polystyrène par réflectivité des rayons X et ellipsométrie en fonction de leur exposition à du CO2
L’objectif principal de ce travail est d’étudier in-situ et ex-situ l’interaction du dioxyde de carbone (CO2) avec les films minces de polystyrène et les surfaces par deux techniqu...