Javascript must be enabled to continue!
Microbial quality of beef and hygiene practices in small and medium slaughterhouses and butcheries in Uganda
View through CrossRef
Abstract
Background If hygiene practices along the beef processing nodes at small and medium enterprise (SME) slaughter houses and butcheries are not observed, they may pose a health risk due to microbial contamination. In SME slaughterhouses and butcheries, the risk may be higher due to transmission of foodborne pathogens. This study determined the hygienic practices and microbial quality risk among meat handlers (MH) in SME slaughterhouses and butcheries. Methods Assessment of microbiological quality of beef was carried out at slaughter houses and butcher shops in the districts of Western, Central and Eastern regions of Uganda. A cross sectional study was conducted from June 2017 to January 2018 using observation checklists to record unhygienic practices among the various actors. Microbial load at slaughter and butchery was determined from a total of 317 swab samples collected from carcass, tools, protective clothing and hands of meat handlers. The microbiological quality of beef was evaluated using standard microbiological methods. The samples were inoculated into differential and selective media. Results Butcheries had the highest microbial load on beef carcass ranging from 4.76 log 10 cfu/cm 2 to 7.90 log 10 cfu/cm 2 Total Viable Counts (TVC) while Total Coliform Counts (TCC) ranged from 1.42 log 10 cfu/cm 2 to 3.05 log 10 cfu/cm 2 , E. coli ranged from 0.68 log 10 cfu/cm 2 to 1.06 log 10 cfu/cm 2 and Staphylococcus aureus ranged from 3.25 log 10 cfu/cm 2 to 4.84 log 10 cfu/cm 2 . Salmonella was absent in all the samples analysed. Results of overall microbial quality of beef in Uganda indicated that only TCC (1.60±0.26 log 10 cfu/cm 2 ) of the beef carcass samples at slaughter houses was not significantly above the safe level (p = 0.693). Overall microbial load (TVC, TCC, E. coli and S. aureus ) at butcheries were significantly (p < 0.05) above the safe level. Butcheries of Mbale district had the highest percentage (70%) of beef carcass samples above the TCC safe levels whereas butcheries of Mbarara district had the highest percentage (40%) of beef carcass samples above the E. coli safe levels. TVC from hands and clothes at butchery across the three study districts varied significantly (p=0.007) with the highest counts (7.23 log 10 cfu/cm 2 ) recorded from personnel clothes and lowest (5.46 log 10 cfu/cm 2 ) recorded from hands. On the other hand, swab samples picked from chopping board and working table at the butchery did not show significant variation in TVC, TCC, E. coli and S. aureus microbial loads across the three study districts. Conclusion Hygienic handling of carcasses after slaughter is critical in preventing contamination and ensuring meat safety in informal meat trading sectors in Uganda. Handling practices of beef at Ugandan slaughterhouses and butcheries are not hygienic hence not up to standard and they contribute to microbial contamination of beef posing a risk to consumers. The distribution stage is the most critical period, during which the quality of meat can easily be compromised.
Springer Science and Business Media LLC
Title: Microbial quality of beef and hygiene practices in small and medium slaughterhouses and butcheries in Uganda
Description:
Abstract
Background If hygiene practices along the beef processing nodes at small and medium enterprise (SME) slaughter houses and butcheries are not observed, they may pose a health risk due to microbial contamination.
In SME slaughterhouses and butcheries, the risk may be higher due to transmission of foodborne pathogens.
This study determined the hygienic practices and microbial quality risk among meat handlers (MH) in SME slaughterhouses and butcheries.
Methods Assessment of microbiological quality of beef was carried out at slaughter houses and butcher shops in the districts of Western, Central and Eastern regions of Uganda.
A cross sectional study was conducted from June 2017 to January 2018 using observation checklists to record unhygienic practices among the various actors.
Microbial load at slaughter and butchery was determined from a total of 317 swab samples collected from carcass, tools, protective clothing and hands of meat handlers.
The microbiological quality of beef was evaluated using standard microbiological methods.
The samples were inoculated into differential and selective media.
Results Butcheries had the highest microbial load on beef carcass ranging from 4.
76 log 10 cfu/cm 2 to 7.
90 log 10 cfu/cm 2 Total Viable Counts (TVC) while Total Coliform Counts (TCC) ranged from 1.
42 log 10 cfu/cm 2 to 3.
05 log 10 cfu/cm 2 , E.
coli ranged from 0.
68 log 10 cfu/cm 2 to 1.
06 log 10 cfu/cm 2 and Staphylococcus aureus ranged from 3.
25 log 10 cfu/cm 2 to 4.
84 log 10 cfu/cm 2 .
Salmonella was absent in all the samples analysed.
Results of overall microbial quality of beef in Uganda indicated that only TCC (1.
60±0.
26 log 10 cfu/cm 2 ) of the beef carcass samples at slaughter houses was not significantly above the safe level (p = 0.
693).
Overall microbial load (TVC, TCC, E.
coli and S.
aureus ) at butcheries were significantly (p < 0.
05) above the safe level.
Butcheries of Mbale district had the highest percentage (70%) of beef carcass samples above the TCC safe levels whereas butcheries of Mbarara district had the highest percentage (40%) of beef carcass samples above the E.
coli safe levels.
TVC from hands and clothes at butchery across the three study districts varied significantly (p=0.
007) with the highest counts (7.
23 log 10 cfu/cm 2 ) recorded from personnel clothes and lowest (5.
46 log 10 cfu/cm 2 ) recorded from hands.
On the other hand, swab samples picked from chopping board and working table at the butchery did not show significant variation in TVC, TCC, E.
coli and S.
aureus microbial loads across the three study districts.
Conclusion Hygienic handling of carcasses after slaughter is critical in preventing contamination and ensuring meat safety in informal meat trading sectors in Uganda.
Handling practices of beef at Ugandan slaughterhouses and butcheries are not hygienic hence not up to standard and they contribute to microbial contamination of beef posing a risk to consumers.
The distribution stage is the most critical period, during which the quality of meat can easily be compromised.
Related Results
Factors that influence beef meat production in Tanzania. A Cobb-Douglas production function estimation approach
Factors that influence beef meat production in Tanzania. A Cobb-Douglas production function estimation approach
Beef meat production is the key to reducing poverty, achieving food security and nutrition, promoting exports, economic growth, and industrialization. Despite a large number of bee...
Assessment of Hygienic Practice on Camel Meat Handlers, and Identification of Bacterial
Contamination in Abattoir and Butcheries of Nagelle Town, Southern Oromia, Ethiopia
Assessment of Hygienic Practice on Camel Meat Handlers, and Identification of Bacterial
Contamination in Abattoir and Butcheries of Nagelle Town, Southern Oromia, Ethiopia
A cross-sectional study was conducted to assess the hygienic practice during handling
of raw camel meat and identification of the major source of bacterial contamination at
abattoi...
Towards developing a beef meat export oriented policy in Tanzania: -Exploring the factors that influence beef meat exports-
Towards developing a beef meat export oriented policy in Tanzania: -Exploring the factors that influence beef meat exports-
The purpose of this study was to investigate the factors that influence beef meat exports in Tanzania, with a particular focus on the years 1985 to 2020, in enhancing the developme...
IN VITRO HYPOGLYCEMIC AND ANTIMICROBIAL ACTIVITY OF CUCUMIS CALLOSUS (ROTTL.) COGN. FRUIT
IN VITRO HYPOGLYCEMIC AND ANTIMICROBIAL ACTIVITY OF CUCUMIS CALLOSUS (ROTTL.) COGN. FRUIT
<!--[if gte mso 9]><xml>
<o:OfficeDocumentSettings>
<o:RelyOnVML/>
<o:AllowPNG/>
</o:OfficeDocumentSettings>
...
Three Dimensional Simulations in Real Time for Personalized Drug Release Prosthesis Used in Lumbosacral Rehabilitation
Three Dimensional Simulations in Real Time for Personalized Drug Release Prosthesis Used in Lumbosacral Rehabilitation
This paper presents a theoretical method for simulation and three-dimensional reconstruction of the anatomical elements of the spine in order to achieve hydrogel disc prosthesis by...
Analysis of Cutting Forces in Peripheral Milling under Varying Machining Conditions
Analysis of Cutting Forces in Peripheral Milling under Varying Machining Conditions
Normal
0
21
false
false
false
ES
X-NONE
X-NONE
MicrosoftInternetExplorer4
...
Constantinople as 'New Rome'
Constantinople as 'New Rome'
<!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Revision>0</o:Revision> <o:TotalTime>0</o:TotalTime> <o:Pages>1</o:Pages> &...
Conversa aos quatro ventos: entrevistas com Juliano Garcia Pessanha, Antonio Carlos Secchin e Maria Valéria Rezende
Conversa aos quatro ventos: entrevistas com Juliano Garcia Pessanha, Antonio Carlos Secchin e Maria Valéria Rezende
<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves /> <w:TrackFormatting /> &l...

