Javascript must be enabled to continue!
The 2017 November 12 Mw 7.3 Sarpol-Zahab (Iran-Iraq border region) earthquake: source model, aftershock sequence and earthquakes triggering
View through CrossRef
<p>The Mw 7.3 Sarpol-Zahab earthquake occurred on 12 November 2017 in the Lurestan arc of the Zagros Simply Folded Belt (ZSFB). It is estimated that 600 people were killed and 8000 were injured in this earthquake. This earthquake has been the largest instrumentally recorded earthquake in the ZSFB and its moment, as well as its mechanism, were unexpected. We present an earthquake source study on the Mw 7.3 Sarpol-Zahab earthquake, two large following earthquakes in the region in 2018 and their corresponding aftershock sequences to gain insight of seismotectonic of the Lurestan arc fold-thrust belt.</p><p>In this study, we complement previous studies on this earthquake, by non-linear probabilistic optimization of joined geodetic and seismic data using a new, efficient Bayesian bootstrap-based optimization scheme to infer the finite fault geometry and fault slip together with meaningful uncertainty estimates of the model parameters. Our optimization is based on the modeling of ascending and descending Sentinel-1 satellite data, seismological waveform from global seismic networks and the strong motion network of Iran. The posterior mean model of the Sarpol-Zahab earthquake shows that the causative fault plane is centered at is 14&#177;2 km depth and has a low dip angle of 17&#176;&#177;2&#176; and a strike of 350&#176;&#177;10&#176;. The rake angle of 144&#176;&#177;4&#176; points to an oblique thrust mechanism. The rupture area of the uniform-slip, rectangular model is 40&#177;2 km long and 16&#177;2 km width and shows 4.0&#177;0.5 m fault slip, which results in a magnitude estimate of Mw 7.3&#177;0.1.</p><p>Later, in August and November 2018, two large earthquakes with Mw 6.0 and Mw 6.4 occurred about 40 km east and 60 km south of the Sarpol-Zahab epicenter, respectively. These earthquakes could have been triggered by the 2017 Sarpol-Zahab earthquake. We apply the same joint inversion modeling to derive the corresponding fault plane solutions. We found strike-slip mechanisms for both events but centroid depths at 10&#177;2 km and 16&#177;2 km for Mw 6.0 and Mw 6.4, respectively.</p><p>The 2017 Sarpol-Zahab earthquake and the following studied 2018 earthquakes were followed by a sustained aftershock sequence, with more than 133 aftershocks exceeding Ml 4.0 until December 30, 2019. We rely on the local and regional seismic broad-band stations of Iran and Iraq permanent networks to estimate full-waveform moment tensor solutions of 70 aftershocks down to Ml 4. Most of these aftershocks have shallow centroid depths between 5 and 12 km, so that they occurred in the uppermost part of the basement and/or in the lower sedimentary cover, which is ~8 km thick in this area.</p><p>Our results suggest that the Sarpol-Zahab earthquakes activated low-angle thrust faults and shallower strike-slip structures, highlighting that both thin- and thick-skin deformation take place in the fold-thrust belts in the Lurestan arc of the Zagros. Such information on the deformation characteristics is important for the hazard and risk assessment of future large earthquakes in this region.<br>Additionally, we demonstrate how the joint inversion of different geophysical data can help to better resolve the fault geometry and the earthquake source parameters.</p>
Title: The 2017 November 12 Mw 7.3 Sarpol-Zahab (Iran-Iraq border region) earthquake: source model, aftershock sequence and earthquakes triggering
Description:
<p>The Mw 7.
3 Sarpol-Zahab earthquake occurred on 12 November 2017 in the Lurestan arc of the Zagros Simply Folded Belt (ZSFB).
It is estimated that 600 people were killed and 8000 were injured in this earthquake.
This earthquake has been the largest instrumentally recorded earthquake in the ZSFB and its moment, as well as its mechanism, were unexpected.
We present an earthquake source study on the Mw 7.
3 Sarpol-Zahab earthquake, two large following earthquakes in the region in 2018 and their corresponding aftershock sequences to gain insight of seismotectonic of the Lurestan arc fold-thrust belt.
</p><p>In this study, we complement previous studies on this earthquake, by non-linear probabilistic optimization of joined geodetic and seismic data using a new, efficient Bayesian bootstrap-based optimization scheme to infer the finite fault geometry and fault slip together with meaningful uncertainty estimates of the model parameters.
Our optimization is based on the modeling of ascending and descending Sentinel-1 satellite data, seismological waveform from global seismic networks and the strong motion network of Iran.
The posterior mean model of the Sarpol-Zahab earthquake shows that the causative fault plane is centered at is 14&#177;2 km depth and has a low dip angle of 17&#176;&#177;2&#176; and a strike of 350&#176;&#177;10&#176;.
The rake angle of 144&#176;&#177;4&#176; points to an oblique thrust mechanism.
The rupture area of the uniform-slip, rectangular model is 40&#177;2 km long and 16&#177;2 km width and shows 4.
0&#177;0.
5 m fault slip, which results in a magnitude estimate of Mw 7.
3&#177;0.
1.
</p><p>Later, in August and November 2018, two large earthquakes with Mw 6.
0 and Mw 6.
4 occurred about 40 km east and 60 km south of the Sarpol-Zahab epicenter, respectively.
These earthquakes could have been triggered by the 2017 Sarpol-Zahab earthquake.
We apply the same joint inversion modeling to derive the corresponding fault plane solutions.
We found strike-slip mechanisms for both events but centroid depths at 10&#177;2 km and 16&#177;2 km for Mw 6.
0 and Mw 6.
4, respectively.
</p><p>The 2017 Sarpol-Zahab earthquake and the following studied 2018 earthquakes were followed by a sustained aftershock sequence, with more than 133 aftershocks exceeding Ml 4.
0 until December 30, 2019.
We rely on the local and regional seismic broad-band stations of Iran and Iraq permanent networks to estimate full-waveform moment tensor solutions of 70 aftershocks down to Ml 4.
Most of these aftershocks have shallow centroid depths between 5 and 12 km, so that they occurred in the uppermost part of the basement and/or in the lower sedimentary cover, which is ~8 km thick in this area.
</p><p>Our results suggest that the Sarpol-Zahab earthquakes activated low-angle thrust faults and shallower strike-slip structures, highlighting that both thin- and thick-skin deformation take place in the fold-thrust belts in the Lurestan arc of the Zagros.
Such information on the deformation characteristics is important for the hazard and risk assessment of future large earthquakes in this region.
<br>Additionally, we demonstrate how the joint inversion of different geophysical data can help to better resolve the fault geometry and the earthquake source parameters.
</p>.
Related Results
Operational Aftershock Forecasting for Mw7.3 Sarpol-e Zahab (2017) Earthquake in Western Iran
Operational Aftershock Forecasting for Mw7.3 Sarpol-e Zahab (2017) Earthquake in Western Iran
<p><strong>Methodology:</strong></p><p>The implementation of short-term forecasts for emergency response manag...
Physical Activity, Anthropometric Characteristics, and Quality of Life of Middle-Aged Women Living in Rural and Nomadic Areas of Kermanshah Province
Physical Activity, Anthropometric Characteristics, and Quality of Life of Middle-Aged Women Living in Rural and Nomadic Areas of Kermanshah Province
Background: High physical activity level (PAL) and anthropometric characteristics (AC) are positively associated with quality of life (QoL). Several studies have investigated rural...
Quantitative Analysis of Shallow Earthquake Sequences and Regional Earthquake Behavior: Implications for Earthquake Forecasting
Quantitative Analysis of Shallow Earthquake Sequences and Regional Earthquake Behavior: Implications for Earthquake Forecasting
<p>This study is a quantitative investigation and characterization of earthquake sequences in the Central Volcanic Region (CVR) of New Zealand, and several regions in New Zea...
Quantitative Analysis of Shallow Earthquake Sequences and Regional Earthquake Behavior: Implications for Earthquake Forecasting
Quantitative Analysis of Shallow Earthquake Sequences and Regional Earthquake Behavior: Implications for Earthquake Forecasting
<p>This study is a quantitative investigation and characterization of earthquake sequences in the Central Volcanic Region (CVR) of New Zealand, and several regions in New Zea...
Aftershock Forecasting
Aftershock Forecasting
Aftershocks can compound the impacts of a major earthquake, disrupting recovery efforts and potentially further damaging weakened buildings and infrastructure. Forecasts of the pro...
Effect of Qinghai Madoi MS7.4 earthquake on Coulomb stress and earthquake probability increment of adjacent faults
Effect of Qinghai Madoi MS7.4 earthquake on Coulomb stress and earthquake probability increment of adjacent faults
On May 22, 2021, a MS7.4 earthquake occurred in Madoi County, Guoluo Prefecture, Qinghai Province. The epicenter was located at 98.34°E and 34.59°N (Officially de...
Application of apparent strong earthquake activity pattern in operational earthquake forecasting
Application of apparent strong earthquake activity pattern in operational earthquake forecasting
Abstract
Consulting the Catalogue of the International Seismological Centre (ISC), for the period 1904–2016 to detect the occurrence of potentially damaging earthquakes we ...
The role of afterslip in driving aftershock sequences
The role of afterslip in driving aftershock sequences
<p>Aftershock sequences following large tectonic earthquakes exhibit considerable spatio-temporal complexity and suggest causative mechanisms beyond co-seismic, elast...

