Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Effect of Anionic Group [SiO4]4-/[PO4]3- on the Luminescence Properties of Dy3+-Doped Tungstate Structural Compounds
View through CrossRef
Abstract
The novel scheelite structures of Li2Ca(WO4)2 , Li2Ca2(WO4)(SiO4), and LiCa2(WO4)(PO4) fluorescent materials were successfully prepared using a high-temperature solid-phase method. The compounds were characterized by XRD, EDS, and XRF. The test results showed that the substitution of [WO4]2- by [SiO4]4- /[PO4]3- tetrahedron in tungstate had no significant influence on the crystal structure of the Li2Ca(WO4)2. When Dy3+ ions were introduced as an activator at an optimum doping concentration of 0.08% mol, all of the as-prepared phosphors generated yellow light emissions, and the emission peak was located close to 576 nm. Replacing [WO4]2- with [SiO4]4- /[PO4]3- tetrahedron significantly increased the luminescence of the Li2Ca(WO4)2 phosphors. In addition, the LiCa2(WO4)(PO4):zDy3+ phosphors had the best luminescence properties, decay life (τ = 0.049 ms), and thermal stability (87.8%).
Title: Effect of Anionic Group [SiO4]4-/[PO4]3- on the Luminescence Properties of Dy3+-Doped Tungstate Structural Compounds
Description:
Abstract
The novel scheelite structures of Li2Ca(WO4)2 , Li2Ca2(WO4)(SiO4), and LiCa2(WO4)(PO4) fluorescent materials were successfully prepared using a high-temperature solid-phase method.
The compounds were characterized by XRD, EDS, and XRF.
The test results showed that the substitution of [WO4]2- by [SiO4]4- /[PO4]3- tetrahedron in tungstate had no significant influence on the crystal structure of the Li2Ca(WO4)2.
When Dy3+ ions were introduced as an activator at an optimum doping concentration of 0.
08% mol, all of the as-prepared phosphors generated yellow light emissions, and the emission peak was located close to 576 nm.
Replacing [WO4]2- with [SiO4]4- /[PO4]3- tetrahedron significantly increased the luminescence of the Li2Ca(WO4)2 phosphors.
In addition, the LiCa2(WO4)(PO4):zDy3+ phosphors had the best luminescence properties, decay life (τ = 0.
049 ms), and thermal stability (87.
8%).
Related Results
Phosphate Distribution at the Ferric (hydr)oxide-Water Interface: Individual and Simultaneous Effects of Bicarbonate and Calcium Ions
Phosphate Distribution at the Ferric (hydr)oxide-Water Interface: Individual and Simultaneous Effects of Bicarbonate and Calcium Ions
Abstract
Concentrations of bicarbonate (HCO3-) are typically high in natural waters and can enhance internal phosphate (PO4) loading from sediment to the overlying water. H...
Photoluminescence studies on LiNa5(PO4)2:Dy3+, Sm3+phosphor
Photoluminescence studies on LiNa5(PO4)2:Dy3+, Sm3+phosphor
AbstractThis paper describes the preparation, structure and photoluminescence properties of a new class LiNa5(PO4)2:Dy3+, Sm3+-phosphor. Crystalline nature confirmed by X-ray diffr...
Facile synthesis, structural characterization, and photoluminescence mechanism of Dy3+ doped YVO4 and Ca2+ co-doped YVO4:Dy3+ nano-lattices
Facile synthesis, structural characterization, and photoluminescence mechanism of Dy3+ doped YVO4 and Ca2+ co-doped YVO4:Dy3+ nano-lattices
Light plays a vital role in the evolution of life. From sunlight to candle-light and then to other form of lighting devices, human beings are utilizing light since time immemorial....
Preparation and luminescence characteristics of SrAl2B2O7:Dy3+ phosphor
Preparation and luminescence characteristics of SrAl2B2O7:Dy3+ phosphor
The SrAl2B2O7:Dy3+ phosphor is synthesizd through a general high temperature solid-state reaction, and its luminescence properties are investigated. The emission spectrum of SrAl2B...
Warm-white emitting Dy³⁺ and Eu³⁺ coactivated NaSrY(BO3)2 phosphors for solid-state lighting
Warm-white emitting Dy³⁺ and Eu³⁺ coactivated NaSrY(BO3)2 phosphors for solid-state lighting
Abstract
Dy3+ and Eu3+ coactivated NaSrY(BO3)2 phosphors were prepared using a solid-state diffusion method. Singly doped NaSrY(BO3)2: Dy3+ phosphors showed dual emission...
SrZn(VO)(PO4)2 und BaCd(VO)(PO4)2: Zum BaZn(VO)(PO4)2-Typ verwandte, jedoch nicht isotype Vanadylphosphate / SrZn(VO)(PO4)2 and BaCd(VO)(PO4)2: Vanadylphosphates Related but not Isotypic to the BaZn(VO)(PO4 )2 Type
SrZn(VO)(PO4)2 und BaCd(VO)(PO4)2: Zum BaZn(VO)(PO4)2-Typ verwandte, jedoch nicht isotype Vanadylphosphate / SrZn(VO)(PO4)2 and BaCd(VO)(PO4)2: Vanadylphosphates Related but not Isotypic to the BaZn(VO)(PO4 )2 Type
Single crystals of the compounds SrZn(VO)(PO4)2 (I) and BaCd(VO)(PO4)2 (II) have been prepared by solid state reactions in evacuated quartz tubes. X-ray investigations confirmed or...
Tunable warm white light emission and energy transfer of Dy3+ co‐doped Sr2LaZrO5.5:Eu3+ phosphors
Tunable warm white light emission and energy transfer of Dy3+ co‐doped Sr2LaZrO5.5:Eu3+ phosphors
AbstractEu3+,Dy3+ co‐doped Sr2LaZrO5.5‐based phosphors were prepared through a sol–gel method. Through characterization, it was found that the Sr2LaZrO5.5‐based fluorescent powder ...
Effect of Dy3+ ions on physical, structural and thermal properties of ZnNaPbB glasses
Effect of Dy3+ ions on physical, structural and thermal properties of ZnNaPbB glasses
Abstract
In this report, inspired by the excellent spectroscopic characteristics of dysprosium (Dy3+) ions doped borate glasses, a series with the composition (70-x)...