Javascript must be enabled to continue!
Remarkable Magnetic Properties in a Mn73.6Ga26.4 Alloy Produced via Out-of-Equilibrium Method
View through CrossRef
Rare-earth-free permanent magnets with the L10 phase are actively researched for their potential as a future class of magnetic materials, capable of operating at higher temperatures and in challenging corrosion environments such as renewable energy applications. Among these classes, MnGa shows potential, being cost effective and having interesting magnetic properties. A MnGa magnetic alloy, with composition Mn73.6Ga26.4 in atomic percent, was produced via the out-of-equilibrium method, and its structural and magnetic properties were assessed using X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and extended magnetic characterization. We show that the MnGa alloy submitted to thermal annealing in optimal conditions exhibits a two-phase microstructure, where small nanocrystals of tetragonal L10/D022 magnetic phase are embedded within a D019 MnGa matrix of a non-collinear antiferromagnetic nature. These co-existing, magnetically different phases produce an optimal set of promising magnetic properties, larger than the values reported in the literature for single-phase MnGa alloys and thin films. Such large values are explained by the exchange coupling between competing non-collinear magnetic sublattices of the D019 MnGa with the net moment of the small magnetic nanocrystals of tetragonal symmetry.
Title: Remarkable Magnetic Properties in a Mn73.6Ga26.4 Alloy Produced via Out-of-Equilibrium Method
Description:
Rare-earth-free permanent magnets with the L10 phase are actively researched for their potential as a future class of magnetic materials, capable of operating at higher temperatures and in challenging corrosion environments such as renewable energy applications.
Among these classes, MnGa shows potential, being cost effective and having interesting magnetic properties.
A MnGa magnetic alloy, with composition Mn73.
6Ga26.
4 in atomic percent, was produced via the out-of-equilibrium method, and its structural and magnetic properties were assessed using X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and extended magnetic characterization.
We show that the MnGa alloy submitted to thermal annealing in optimal conditions exhibits a two-phase microstructure, where small nanocrystals of tetragonal L10/D022 magnetic phase are embedded within a D019 MnGa matrix of a non-collinear antiferromagnetic nature.
These co-existing, magnetically different phases produce an optimal set of promising magnetic properties, larger than the values reported in the literature for single-phase MnGa alloys and thin films.
Such large values are explained by the exchange coupling between competing non-collinear magnetic sublattices of the D019 MnGa with the net moment of the small magnetic nanocrystals of tetragonal symmetry.
Related Results
Magnetic cloak made of NdFeB permanent magnetic material
Magnetic cloak made of NdFeB permanent magnetic material
In the past few years, the concept of an electromagnetic invisibility cloak has received much attention. Based on the pioneering theoretical work, invisibility cloaks have been gre...
Analysis of magnetohydrodynamic drag character for hypersonic vehicles
Analysis of magnetohydrodynamic drag character for hypersonic vehicles
In hypersonic flight, a very high temperature area can form ahead of the nose of aerocraft due to the shock aerodynamic heating, which leads to air weakly ionized. Many researchers...
Effect of substituted concentration on structure and magnetic properties of Y3Fe5-xInxO12
Effect of substituted concentration on structure and magnetic properties of Y3Fe5-xInxO12
Abstract: This study examines the effect of substituted concentration on the structure and magnetic properties of Y3Fe5-xInxO12 (x = 0.1 ÷ 0.7) powder samples prepared using the so...
In Vitro Comparative Study of Fretting-Corrosion Resistance of Ti6Al4V and Co28Cr6Mo in a Taper Joint Subjected to High Bending Moment
In Vitro Comparative Study of Fretting-Corrosion Resistance of Ti6Al4V and Co28Cr6Mo in a Taper Joint Subjected to High Bending Moment
Co alloy modular necks have been introduced in orthopaedics to address mechanical failure of the neck-stem junction (NSJ) observed in Ti alloy dual-modular hip stem. However, follo...
The importance of non-equilibrium in the development of economic system (thermodynamic approach)
The importance of non-equilibrium in the development of economic system (thermodynamic approach)
Purpose– New non-equilibrium systems theory is a very important theoretical and methodological base of survey and understanding of contemporary economic systems and processes. Equi...
Effect of milling and annealing on microstructural, electrical and magnetic properties of electrodeposited Ni-11.3 Fe-1.4w alloy
Effect of milling and annealing on microstructural, electrical and magnetic properties of electrodeposited Ni-11.3 Fe-1.4w alloy
A nanostructured Ni-11.3Fe-1.4W alloy deposit was obtained from an ammonium
citrate bath at a current density of 600 mAcm-2. XRD analysis shows that the
deposit contains an a...
Synthesis and Magnetic Characterization of (Porous Silicon/"Hard-Soft" Magnetic) Nanocomposites
Synthesis and Magnetic Characterization of (Porous Silicon/"Hard-Soft" Magnetic) Nanocomposites
The purpose of this work is to combine magnetic nanostructures of two different metals within porous silicon (PS) to influence the magnetic switching behavior of this porous silico...
Ceramometal Bond Strength Analysis using New and Recast Nonprecious Alloys with Three Different Ceramics
Ceramometal Bond Strength Analysis using New and Recast Nonprecious Alloys with Three Different Ceramics
ABSTRACT
Objectives
This study is undertaken to evaluate the dependence of bond strength of 100% fresh nonprecious alloy and the combination of 50% recast (used) alloy and 50% fre...

