Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Moisture-induced elastic constants of poplar

View through CrossRef
Twelve elastic constants of Populus × canadensis, previously unavailable in the literature, were determined using ultrasonic testing.Samples were conditioned at a temperature of 20 °C ± 1 °C and 45 %, 65 %, and 85 % relative humidity. An Olympus EPOCH 650 flaw detector was used with V153-RM (1 MHz shear wave), and A133S-RM (2,25 MHz pressure wave) contact transducers. A contact medium was applied. Wave propagation times were measured along the principal directions (L, R, T), the main planes (LR, LT, RT, RL, TL, TR), and the off-axis planes (LR45°, LT45°, RT45°). Ultrasonic wave velocities were calculated across the specified directions and planes. These velocities were then used to estimate moduli (EL, ER, ET, GLR, GLT, GRT) and Poisson’s ratios (µLR, µLT, µRT, µRL, µTL, µTR) via stiffness matrix analysis. Moduli were also calculated using a simple formula multiplying the density and velocity for comparison. Elastic moduli derived from the stiffness matrix were substantially lower than those from the simple density–velocity formula, while shear moduli remained nearly identical. Both moduli steadily decreased with the increase in moisture content. Moisture content significantly affected all moduli. In contrast, Poisson’s ratios showed no consistent trend with moisture. Specifically, µLR and µRL increased linearly with moisture, while the other ratios decreased irregularly. For µRT, the effect of moisture was insignificant. Relationships between density and velocity, moduli, and Poisson’s ratios were assessed using coefficients of determination.The coefficients ranged from 0,23 to 0,56 for velocities, 0,08 to 0,37 for elasticity, 0,23 to 0,31 for shear, and 0 to 0,10 for ratios. When the coefficient was calculated within the humidity groups significant increases were observed. It was assumed that water-related increases in density did not reflect structural solidification, and therefore did not lead to improved elasric properties. This effect is explained by the well-known reduction in wave velocities caused by water, which dominates the calculations.    
Title: Moisture-induced elastic constants of poplar
Description:
Twelve elastic constants of Populus × canadensis, previously unavailable in the literature, were determined using ultrasonic testing.
Samples were conditioned at a temperature of 20 °C ± 1 °C and 45 %, 65 %, and 85 % relative humidity.
An Olympus EPOCH 650 flaw detector was used with V153-RM (1 MHz shear wave), and A133S-RM (2,25 MHz pressure wave) contact transducers.
A contact medium was applied.
Wave propagation times were measured along the principal directions (L, R, T), the main planes (LR, LT, RT, RL, TL, TR), and the off-axis planes (LR45°, LT45°, RT45°).
Ultrasonic wave velocities were calculated across the specified directions and planes.
These velocities were then used to estimate moduli (EL, ER, ET, GLR, GLT, GRT) and Poisson’s ratios (µLR, µLT, µRT, µRL, µTL, µTR) via stiffness matrix analysis.
Moduli were also calculated using a simple formula multiplying the density and velocity for comparison.
Elastic moduli derived from the stiffness matrix were substantially lower than those from the simple density–velocity formula, while shear moduli remained nearly identical.
Both moduli steadily decreased with the increase in moisture content.
Moisture content significantly affected all moduli.
In contrast, Poisson’s ratios showed no consistent trend with moisture.
Specifically, µLR and µRL increased linearly with moisture, while the other ratios decreased irregularly.
For µRT, the effect of moisture was insignificant.
Relationships between density and velocity, moduli, and Poisson’s ratios were assessed using coefficients of determination.
The coefficients ranged from 0,23 to 0,56 for velocities, 0,08 to 0,37 for elasticity, 0,23 to 0,31 for shear, and 0 to 0,10 for ratios.
When the coefficient was calculated within the humidity groups significant increases were observed.
It was assumed that water-related increases in density did not reflect structural solidification, and therefore did not lead to improved elasric properties.
This effect is explained by the well-known reduction in wave velocities caused by water, which dominates the calculations.
   .

Related Results

British Food Journal Volume 45 Issue 1 1943
British Food Journal Volume 45 Issue 1 1943
The complex cellular structure and chemical nature of fruit and vegetable tissues retard evaporation so that under no conditions of temperature and humidity does the rate of evapor...
Moisture sources for Greenland ice core sites: Seasonality and land/ocean contributions
Moisture sources for Greenland ice core sites: Seasonality and land/ocean contributions
<div> <div>The interpretation of the climate ice core isotope signal relies on the knowledge on the underlying moisture transport and variability hereof...
Prediction Distribution Model of Moisture Content in Laminated Wood Components
Prediction Distribution Model of Moisture Content in Laminated Wood Components
Shrinkage cracks are some of the most common defects in timber structures obtained from woods with an uneven distribution of moisture content and are subject to external dynamic en...
Third-Order Padé Thermoelastic Constants of Solid Rocks
Third-Order Padé Thermoelastic Constants of Solid Rocks
Abstract Classical third-order thermoelastic constants are generally formulated by the theory of small-amplitude acoustic waves in cubic crystals during heat trea...
Elastic Constants Prediction of 3D Fiber-Reinforced Composites Using Multiscale Homogenization
Elastic Constants Prediction of 3D Fiber-Reinforced Composites Using Multiscale Homogenization
This paper presents a multi-scale-homogenization based on a two-step methodology (micro-meso and meso-macro homogenization) to predict the elastic constants of 3D fiber-reinforced ...
Effects of Field-Grown Transgenic Cry1Ah1 Poplar on the Rhizosphere Microbiome
Effects of Field-Grown Transgenic Cry1Ah1 Poplar on the Rhizosphere Microbiome
Abstract Background: Poplar (Populus) is a genus of globally important plantation trees used widely in industrial and agricultural production. However, poplar is easily dam...
Large-scale Soil Moisture Monitoring: A New Approach
Large-scale Soil Moisture Monitoring: A New Approach
Soil moisture is a critical factor for understanding the interactions and feedback between the atmosphere and Earth's surface, particularly through energy and water cycles. It also...
Elastic Anisotropy of Human Cortical Bone Secondary Osteons Measured by Nanoindentation
Elastic Anisotropy of Human Cortical Bone Secondary Osteons Measured by Nanoindentation
The identification of anisotropic elastic properties of lamellar bone based on nanoindentation data is an open problem. Therefore, the purpose of this study was to develop a method...

Back to Top