Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Pitch Cone Design of Face-Hobbed Hypoid Gears
View through CrossRef
Abstract
In the present paper, the principle of pitch cone design of hypoid gears by Mr. E. Wildhaber is studied first. Then, three equations are derived for calculation of the radii of curvatures of tooth lengthwise lines of the imaginary crown gear, the generated gear and the non-generated gears. And finally, an improved algorithm for pitch cone design of face-hobbed hypoid gears is proposed, in which two design equations in two variables are used, and hence the trial-and-error procedure is avoided.
American Society of Mechanical Engineers
Title: Pitch Cone Design of Face-Hobbed Hypoid Gears
Description:
Abstract
In the present paper, the principle of pitch cone design of hypoid gears by Mr.
E.
Wildhaber is studied first.
Then, three equations are derived for calculation of the radii of curvatures of tooth lengthwise lines of the imaginary crown gear, the generated gear and the non-generated gears.
And finally, an improved algorithm for pitch cone design of face-hobbed hypoid gears is proposed, in which two design equations in two variables are used, and hence the trial-and-error procedure is avoided.
Related Results
Increased life expectancy of heart failure patients in a rural center by a multidisciplinary program
Increased life expectancy of heart failure patients in a rural center by a multidisciplinary program
Abstract
Funding Acknowledgements
Type of funding sources: None.
INTRODUCTION Patients with heart failure (HF)...
Primary PCI: a reasonable treatment for STEMI care during the COVID-19 pandemic
Primary PCI: a reasonable treatment for STEMI care during the COVID-19 pandemic
Abstract
Funding Acknowledgements
Type of funding sources: None.
Introduction
...
Estimation of Bending Fatigue Life of Hypoid Gears Using a Multiaxial Fatigue Criterion
Estimation of Bending Fatigue Life of Hypoid Gears Using a Multiaxial Fatigue Criterion
In this study, a crack initiation life prediction methodology for the tooth bending fatigue of hypoid gears is proposed. This methodology employs a previously developed finite-elem...
Optimal Tooth Surface Modifications in Face-Hobbed Hypoid Gears
Optimal Tooth Surface Modifications in Face-Hobbed Hypoid Gears
In this study, an optimization methodology is proposed to systematically define head-cutter geometry and machine tool settings to introduce optimal tooth modifications in face-hobb...
Comparison of Contact Fatigue Strength of Carbon Case Hardening and Laser Hardening of Gears
Comparison of Contact Fatigue Strength of Carbon Case Hardening and Laser Hardening of Gears
Carbon case hardening of gears is a widely used surface treatment in the manufacturing industry. However, an evident shortcoming is that gear distortion after carbon case hardening...
Timing-induced illusory percepts of pitch
Timing-induced illusory percepts of pitch
It has long been proposed that the brain integrates pitch and timing cues during auditory perception. If true, the pitch of a sound should influence its perceived timing, and the t...
Effect of Forging Grain Flow on Performance of Hypoid Gear Set - Case Study
Effect of Forging Grain Flow on Performance of Hypoid Gear Set - Case Study
Gear sets are one of the prime components in rear axle assembly that drives the wheel by taking the power from gear box. Typically forged gears are used for automotive applications...
Point-Line Meshing Gear Drive
Point-Line Meshing Gear Drive
Point-line meshing gear is a new-styled gear characterized by both easy manufacturing and divisibility of involute gears and high strength for contacting between convex and concave...