Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Investigating the Impact of Monolayer and Multilayer PVD Coatings on Cutting Tool Friction Factor
View through CrossRef
Abstract
The purpose of the paper is to examine the ZrSiN, monolayer TiN, and multilayer TiSiN PVD coatings' friction factors on tempered steel 45X (50 HRC) and steel 45 (180 HB). The tribological characteristics were studied using tribometer. The registered values of friction factor were transferred to the computer using an analog to digital converter. TiN coatings on both steel 45 (180 HB) and the tempered steel 45Х (50 HRC) shows an increase in friction factor. Friction factor of TiSiN coating at 70V and 150 V also increases with time. In case of ZrSiN, the friction factor remains constant for both the tool materials for deposition current of 150V.The results of the investigations provide useful information for applying ZrSiN PVD coating for the improvement of tool life of cutting tools. The paper contributes to better understanding of the friction properties of monolayer TiN, multilayer TiSiN, and ZrSiN PVD coatings deposited on steel 45 (180 HB) and the tempered steel 45Х (50 HRC).
Springer Science and Business Media LLC
Title: Investigating the Impact of Monolayer and Multilayer PVD Coatings on Cutting Tool Friction Factor
Description:
Abstract
The purpose of the paper is to examine the ZrSiN, monolayer TiN, and multilayer TiSiN PVD coatings' friction factors on tempered steel 45X (50 HRC) and steel 45 (180 HB).
The tribological characteristics were studied using tribometer.
The registered values of friction factor were transferred to the computer using an analog to digital converter.
TiN coatings on both steel 45 (180 HB) and the tempered steel 45Х (50 HRC) shows an increase in friction factor.
Friction factor of TiSiN coating at 70V and 150 V also increases with time.
In case of ZrSiN, the friction factor remains constant for both the tool materials for deposition current of 150V.
The results of the investigations provide useful information for applying ZrSiN PVD coating for the improvement of tool life of cutting tools.
The paper contributes to better understanding of the friction properties of monolayer TiN, multilayer TiSiN, and ZrSiN PVD coatings deposited on steel 45 (180 HB) and the tempered steel 45Х (50 HRC).
Related Results
Optimising tool wear and workpiece condition monitoring via cyber-physical systems for smart manufacturing
Optimising tool wear and workpiece condition monitoring via cyber-physical systems for smart manufacturing
Smart manufacturing has been developed since the introduction of Industry 4.0. It consists of resource sharing and networking, predictive engineering, and material and data analyti...
Mechanical and tribological behavior of multilayer and monolayer TiN-based coatings
Mechanical and tribological behavior of multilayer and monolayer TiN-based coatings
This study investigates the mechanical and tribological properties of monolayer TiN coatings and multilayer TiN/TiCN coatings deposited via direct current magnetron sputtering onto...
Comparative Study of Friction Models in High-Speed Machining of Titanium Alloys
Comparative Study of Friction Models in High-Speed Machining of Titanium Alloys
Friction has a significant impact on chip formation, so modeling it accurately is crucial in numerical cutting simulations. However, there is still controversy regarding the applic...
PERBANDINGAN METODE PRELOADING DENGAN VAKUM KONSOLIDASI TANAH PADA PEMODELAN DI LABORATORIUM
PERBANDINGAN METODE PRELOADING DENGAN VAKUM KONSOLIDASI TANAH PADA PEMODELAN DI LABORATORIUM
ABSTRACT This study aims to determine the parameter comparison of the magnitude of the primary reduction and consolidation time in the preloading method using PVD and vacuum method...
Normal Portal Vein Diameter (PVD) and Peak Systolic Velocity (PSV) in Healthy Iranian Children
Normal Portal Vein Diameter (PVD) and Peak Systolic Velocity (PSV) in Healthy Iranian Children
Background: It is crucial to determine the normal portal vein diameter (PVD) and portal vein velocity (PSV) in different populations, and ages since changes in size and velocity of...
Mechanical Properties of Cr/CrN/CrCN/ZrN Multilayer Coatings by Physical Vapour Deposition (PVD)
Mechanical Properties of Cr/CrN/CrCN/ZrN Multilayer Coatings by Physical Vapour Deposition (PVD)
Multilayer coating onto orthopedic implants has been studied extensively due to their excellence mechanical and biological properties. A multilayer coating was coated onto metal im...
Cutting Force and Friction Modelling in High Speed End-Milling
Cutting Force and Friction Modelling in High Speed End-Milling
Temperature field in metal cutting process is one of the most important phenomena in machining process. Temperature rise in machining directly or indirectly determines other cuttin...
Features of Tribooxidation of the High-Entropy Coating (AlCrZrTiTa)N during Dry High-Speed Cutting
Features of Tribooxidation of the High-Entropy Coating (AlCrZrTiTa)N during Dry High-Speed Cutting
The high-entropy PVD coating (AlCrZrTiTa)N, characterized by its high hardness (50–60 GPa), elastic modulus above 300 MPa, and high heat resistance up to 1300 °C, is used for coati...