Effects of Spur Dyke’s Orientation on Bed Variation in Channel Bend

Spur dykes also known as Groynes are often used to either divert or attract the flow from the main structure to safeguard their life. Those structures may be bridge piers, abutments or any similar hydraulics structures. Spur dykes are also used to save the cutting of banks on concave side of stream. Lots of work have been done in recent past on spur dykes by many investigators in which various hydraulic and geometrical parameters of spur dykes such as discharge, sediment size, flow velocity, shear stress, spur dykes shape, size and submergence etc. are studied in detail. But mostly all the studies were pointed out in straight open channels. Very few studies were done in curved channel and only their similar effects were studied. In present thesis main emphasis is given to study the effect of orientation and location of spur dykes in meandering channel on the bed of downstream side. In the present study experimental work has been carried out in 80° bend and constant discharge (Q = 4.5 l/s) is allowed to pass in channel without spur dyke. It is found that maximum scouring occurs at angular displacement θ = 60° to 80° in the vicinity of outer bank. To minimize this scouring, spur dyke has been installed at angular displacement θ = 20°, 40° & 60° by changing the dyke angle α = 60°, 90° & 120° respectively. It is found that scouring at θ = 60° is reduced by installing spur dyke at angular displacement θ = 40° which is oriented at α = 60° and scouring at θ = 80° is reduced by installing spur dyke at angular displacement θ = 60° which is oriented at α = 60°.