Preliminary Development of a Robotic Hip-Knee Exoskeleton with 3D-Printed Backdrivable Actuators

ABSTRACTRobotic exoskeletons can provide powered locomotor assistance and rehabilitation to persons with mobility impairments due to aging and/or physical disabilities. Here we present the preliminary development and systems integration of T-BLUE - a modular, bilateral robotic hip-knee exoskeleton with 3D-printed backdriveable actuators. We retrofitted commercially available passive postoperative orthoses with open-source 3D-printed actuators to minimize cost and improve accessibility. The actuators are of quasi-direct drive design with high-torque density brushless DC motors and low gearing (15:1 transmission ratio) for low output impedance and high backdrivability, therein allowing for energy-efficient and dynamic human-robot physical interaction and legged locomotion. The modular design allows the exoskeleton to be customized and adapted to different users (e.g., persons with lateral vs. bilateral mobility impairments) and different hip-knee joint configurations. The goals of this preliminary study were to describe our experience with regards to the repeatability of the open-source 3D-printed actuators in engineering practice and the feasibility of integrating the actuators into wearable robotics hardware. This qualitative research serves as a first step towards using the robotic exoskeleton to support the development and testing of novel controller designs and rehabilitation protocols for different locomotor activities of daily living. We are especially interested in populations that could benefit from partial locomotor assistance such as older adults and/or persons with osteoarthritis. Future research will involve benchtop testing to quantitatively evaluate the actuator performance in terms of dynamics and energy-efficiency.