Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Graphene Oxide Film as Passive Q-switcher in Erbium-doped Fiber Laser Cavity
View through CrossRef
All-fiber passively Q-switched fiber lasers have been demonstrated by using graphene oxide (GO) Q-switcher for possible applications in telecommunication, laser processing, fiber sensing and medical community. The GO material was obtained through a modified Hummers method from expanded acid washed graphite flakes and it was embedded into a polyvinyl alcohol (PVA) film to form a saturable absorber (SA) device. The Q-switched pulse operates at 1563.3 nm with a repetition rate that can be tuned from 44.33 kHz to 61.77 kHz as the pump power changes from 39 mW to 96 mW. The highest repetition rate of 61.77 kHz is achieved at a pump power of 96 mW and it is observed that the Q-switched pulse produced maximum pulse energy of 0.054 nJ and pulse width of 5.57 ?s at 96 mW pump power. Full Text: PDF ReferencesJ. Zayhowski and C. Dill, "Coupled-cavity electro-optically Q-switched Nd:YVO4 microchip lasers", Optics letters 20, 716 (1995). CrossRef C.-x. Gao, W. Zhao, Y.-s. Wang, S.-l. Zhu, G.-f. Chen, and Y.-g. Wang, "Passive Q-switched fiber laser with SESAM in ytterbium-doped double-clad fiber", 27th International congress on High-Speed Photography and Photonics, 62794G (2007). CrossRef M. Ahmed, N. Ali, Z. Salleh, A. Rahman, S. Harun, M. Manaf, "Q-switched erbium doped fiber laser based on single and multiple walled carbon nanotubes embedded in polyethylene oxide film as saturable absorber", Optics & Laser Technology 65, 25 (2015). CrossRef S. Harun, M. Ismail, F. Ahmad, M. Ismail, R. Nor, N. Zulkepely, et al., "A Q-switched erbium-doped fiber laser with a carbon nanotube based saturable absorber", Chinese Physics Letters 29, 114202 (2012). CrossRef A. Martinez and Z. Sun, "Nanotube and graphene saturable absorbers for fibre lasers", Nat Photon 7, 842 (2013). CrossRef J. Boguslawski, J. Sotor, G. Sobon, R. Kozinski, K. Librant, M. Aksienionek, et al., "Graphene oxide paper as a saturable absorber for Er- and Tm-doped fiber lasers", Photonics Research 3, 119 (2015). CrossRef H. Ahmad, F. D. Muhammad, M. Z. Zulkifli, and S. W. Harun, "Q-switched pulse generation from an all-f iber distributed Bragg reflector laser using graphene as saturable absorber", Chinese Optics Letters 11, 071401 (2013). CrossRef
Photonics Society of Poland
Title: Graphene Oxide Film as Passive Q-switcher in Erbium-doped Fiber Laser Cavity
Description:
All-fiber passively Q-switched fiber lasers have been demonstrated by using graphene oxide (GO) Q-switcher for possible applications in telecommunication, laser processing, fiber sensing and medical community.
The GO material was obtained through a modified Hummers method from expanded acid washed graphite flakes and it was embedded into a polyvinyl alcohol (PVA) film to form a saturable absorber (SA) device.
The Q-switched pulse operates at 1563.
3 nm with a repetition rate that can be tuned from 44.
33 kHz to 61.
77 kHz as the pump power changes from 39 mW to 96 mW.
The highest repetition rate of 61.
77 kHz is achieved at a pump power of 96 mW and it is observed that the Q-switched pulse produced maximum pulse energy of 0.
054 nJ and pulse width of 5.
57 ?s at 96 mW pump power.
Full Text: PDF ReferencesJ.
Zayhowski and C.
Dill, "Coupled-cavity electro-optically Q-switched Nd:YVO4 microchip lasers", Optics letters 20, 716 (1995).
CrossRef C.
-x.
Gao, W.
Zhao, Y.
-s.
Wang, S.
-l.
Zhu, G.
-f.
Chen, and Y.
-g.
Wang, "Passive Q-switched fiber laser with SESAM in ytterbium-doped double-clad fiber", 27th International congress on High-Speed Photography and Photonics, 62794G (2007).
CrossRef M.
Ahmed, N.
Ali, Z.
Salleh, A.
Rahman, S.
Harun, M.
Manaf, "Q-switched erbium doped fiber laser based on single and multiple walled carbon nanotubes embedded in polyethylene oxide film as saturable absorber", Optics & Laser Technology 65, 25 (2015).
CrossRef S.
Harun, M.
Ismail, F.
Ahmad, M.
Ismail, R.
Nor, N.
Zulkepely, et al.
, "A Q-switched erbium-doped fiber laser with a carbon nanotube based saturable absorber", Chinese Physics Letters 29, 114202 (2012).
CrossRef A.
Martinez and Z.
Sun, "Nanotube and graphene saturable absorbers for fibre lasers", Nat Photon 7, 842 (2013).
CrossRef J.
Boguslawski, J.
Sotor, G.
Sobon, R.
Kozinski, K.
Librant, M.
Aksienionek, et al.
, "Graphene oxide paper as a saturable absorber for Er- and Tm-doped fiber lasers", Photonics Research 3, 119 (2015).
CrossRef H.
Ahmad, F.
D.
Muhammad, M.
Z.
Zulkifli, and S.
W.
Harun, "Q-switched pulse generation from an all-f iber distributed Bragg reflector laser using graphene as saturable absorber", Chinese Optics Letters 11, 071401 (2013).
CrossRef.
Related Results
Two-Beam Ultrafast Laser Scribing of Graphene Patterns with 90-nm Subdiffraction Feature Size
Two-Beam Ultrafast Laser Scribing of Graphene Patterns with 90-nm Subdiffraction Feature Size
The fabrication of high-resolution laser-scribed graphene devices is crucial to achieving large surface areas and thus performance breakthroughs. However, since the investigation m...
Preparation of Graphene Fibers
Preparation of Graphene Fibers
Graphene owns intriguing properties in electronic, thermal, and mechanic with unique two-dimension (2D) monolayer structure. The new member of carbon family has not only attracted ...
Performance of Graphene Nanopowder-Polyvinyl Alcohol in Optical Pulse Generation at 1.5 Micron Region
Performance of Graphene Nanopowder-Polyvinyl Alcohol in Optical Pulse Generation at 1.5 Micron Region
This paper explains about the performance of graphene nanopowder (GNP) based saturable absorber (SA) at 1.5-micron region which is prepared by dissolution in polyvinyl alcohol (PVA...
Simulation of interaction behavior between dislocation and graphene during nanoindentation of graphene/aluminum matrix nanocomposites
Simulation of interaction behavior between dislocation and graphene during nanoindentation of graphene/aluminum matrix nanocomposites
Graphene has been thought to be an ideal reinforcement material for metal matrix composite due to its superior mechanical properties and unique two-dimensional geometry. However, t...
The structure of thermally reduced graphene oxide
The structure of thermally reduced graphene oxide
The paper focused on the description of the reduced graphene oxide (rGO) structure. This material is obtained from a multistage production process. Each of these stages has a large...
Graphene slurry based passive Q-switcher in erbium doped fiber laser
Graphene slurry based passive Q-switcher in erbium doped fiber laser
In this work, a Graphene slurry based passive Q-switcher fabricated from Graphene-Polylactic acid (PLA) filament which is used for 3D printing. To produce the Graphene slurry, the ...
The influence of the oxidation method on the properties of reduced graphene oxide
The influence of the oxidation method on the properties of reduced graphene oxide
Derivatives of graphene have become important materials due to their excellent properties. Graphene oxide and reduced graphene oxide are especially interesting because they are pro...
Reclaiming the Wasteland: Samson and Delilah and the Historical Perception and Construction of Indigenous Knowledges in Australian Cinema
Reclaiming the Wasteland: Samson and Delilah and the Historical Perception and Construction of Indigenous Knowledges in Australian Cinema
It was always based on a teenage love story between the two kids. One is a sniffer and one is not. It was designed for Central Australia because we do write these kids off there. N...