Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Study the Ability of Penicillium Roqueforti in Degradation of Plastic Low-Density Polyethylene (LDPE)

View through CrossRef
In this study, the fungus Penicillium roqueforte was isolated from the soil and tested for its ability to decompose light polyethylene. Two methods were used. In the first method, polyethylene was mixed with PDA medium at concentrations of 20 mg/mL and 40 mg/mL. The results showed that polyethylene was not a fungus inhibitor, but rather stimulated its growth. The second method focused on the growth elements in mushrooms whose carbon source is contained in polyethylene. Thus, the carbon source in the agricultural medium, PDA, was replaced by a polyethylene material. The rate of inhibition of fungal growth was about 23%. After that, and then again, the modified medium was used to isolate the fungi from several places from the air inside the building where the laboratory is and outside the building as well, and many fungi were isolated from them. "Aspergillus niger, Aspergillus spp, Penicillium spp.Polyethylene was extracted from the Media in which the fungi under study were grown and fungi isolated from the air, for the purpose of its thorough study by using an X-ray analyzer to determine the extent of decomposition of polyethylene. The results of the analysis showed that the fungus was able to break the polyethylene chain material, and the samples were also examined with FTIR and the results showed the ability of the fungus to oxidize polyethylene and thus the results showed the ability of the fungus to rid the environment of polyethylene difficult to decompose.
Title: Study the Ability of Penicillium Roqueforti in Degradation of Plastic Low-Density Polyethylene (LDPE)
Description:
In this study, the fungus Penicillium roqueforte was isolated from the soil and tested for its ability to decompose light polyethylene.
Two methods were used.
In the first method, polyethylene was mixed with PDA medium at concentrations of 20 mg/mL and 40 mg/mL.
The results showed that polyethylene was not a fungus inhibitor, but rather stimulated its growth.
The second method focused on the growth elements in mushrooms whose carbon source is contained in polyethylene.
Thus, the carbon source in the agricultural medium, PDA, was replaced by a polyethylene material.
The rate of inhibition of fungal growth was about 23%.
After that, and then again, the modified medium was used to isolate the fungi from several places from the air inside the building where the laboratory is and outside the building as well, and many fungi were isolated from them.
"Aspergillus niger, Aspergillus spp, Penicillium spp.
Polyethylene was extracted from the Media in which the fungi under study were grown and fungi isolated from the air, for the purpose of its thorough study by using an X-ray analyzer to determine the extent of decomposition of polyethylene.
The results of the analysis showed that the fungus was able to break the polyethylene chain material, and the samples were also examined with FTIR and the results showed the ability of the fungus to oxidize polyethylene and thus the results showed the ability of the fungus to rid the environment of polyethylene difficult to decompose.

Related Results

Hot Set Characterization of Electron Beam Irradiated-Copper (II) Oxide Added LDPE Composites under Acidic Aging
Hot Set Characterization of Electron Beam Irradiated-Copper (II) Oxide Added LDPE Composites under Acidic Aging
In this research study, the effect of aging duration time and electron beam irradiation dosages on the hot set results of copper (II) oxide added LDPE composites have been investig...
Effect of γ‐Irradiation on the Physicochemical Properties of LDPE/HCB and LDPE/iPP/HCB Composites
Effect of γ‐Irradiation on the Physicochemical Properties of LDPE/HCB and LDPE/iPP/HCB Composites
ABSTRACTThe influence of γ‐irradiation dose and the concentration of hexachlorobutadiene (HCB) on the thermal and mechanical properties of low‐density polyethylene (LDPE) and LDPE/...
Reactive Compatibilization of PA6/LDPE Blends with Glycidyl Methacrylate Functionalized Polyolefins
Reactive Compatibilization of PA6/LDPE Blends with Glycidyl Methacrylate Functionalized Polyolefins
AbstractSummary: Blends of polyamide‐6 (PA6) and low density polyethylene (LDPE) were compatibilized by melt mixing with various polyolefins functionalized with glycidyl methacryla...
Power Frequency Breakdown Properties of LDPE-Doped Inorganic Nanoparticles
Power Frequency Breakdown Properties of LDPE-Doped Inorganic Nanoparticles
Although polyethylene is widely used in electrical insulation, it does not possess dielectric properties. It is therefore desirable to develop insulation materials with excellent d...
Tubular Film Blowing
Tubular Film Blowing
Tubular film blowing has long been used to produce biaxially oriented films using such thermoplastic polymers as low-density polyethylene (LDPE), high-density polyethylene (HDPE), ...
Low-density polyethylene microplastics alter chemical properties and microbial communities in agricultural soil
Low-density polyethylene microplastics alter chemical properties and microbial communities in agricultural soil
AbstractMicroplastic (MP) pollution in agricultural soils, resulting from the use of plastic mulch, compost, and sewage sludge, jeopardizes the soil microbial populations. However,...

Back to Top