Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
19‐1: Invited Paper: Development of INVAR alloy foil used in FMM
View through CrossRef
According to different smelting processes, nonmetallic inclusions are divided into four grades: basic purity, industrial purity, high purity and ultra‐high purity to cope with the influence of inclusion size and quantity on INVAR foil. Smelting production was carried out according to different needs in OLED field. The concept of "extreme manufacturing" was inducted to design process. The "Four‐Ultra quality" controling that Ultra‐purity, Ultra‐smooth surface, Ultra‐flat shape and Ultra‐precise dimension were put forward and realized in the production process of INVAR alloy foil for FMM. The prepared INVAR alloy foil reached a high level and met the application requirements of FMM.
Title: 19‐1:
Invited Paper:
Development of INVAR alloy foil used in FMM
Description:
According to different smelting processes, nonmetallic inclusions are divided into four grades: basic purity, industrial purity, high purity and ultra‐high purity to cope with the influence of inclusion size and quantity on INVAR foil.
Smelting production was carried out according to different needs in OLED field.
The concept of "extreme manufacturing" was inducted to design process.
The "Four‐Ultra quality" controling that Ultra‐purity, Ultra‐smooth surface, Ultra‐flat shape and Ultra‐precise dimension were put forward and realized in the production process of INVAR alloy foil for FMM.
The prepared INVAR alloy foil reached a high level and met the application requirements of FMM.
Related Results
The instability of invar
The instability of invar
Abstract
Almost since its invention in 1896, invar has been known to be a dimensionally unstable pendulum rod material. A few articles have been published over the y...
Optimisation of LPBF process parameters and residual stress analyses of Invar-10wt% TiC and Invar-10wt% TiN metal matrix composites
Optimisation of LPBF process parameters and residual stress analyses of Invar-10wt% TiC and Invar-10wt% TiN metal matrix composites
Abstract
To enhance the mechanical properties of Invar (Fe–36Ni) for a broader range of applications, reinforcement with Titanium Carbide (TiC) and Titanium Nitride (TiN)...
Necking of invar layer in copper-invar laminates during roll-bonding
Necking of invar layer in copper-invar laminates during roll-bonding
Abstract. Sheets of Fe-36%Ni (Invar) and copper alloys are bonded by roll-bonding process to produce metallic composites with a low thermal expansion coefficient and large conducti...
Head-to-head hydrodynamic performance comparison of six foil setups with four and two foil configurations on trimarans in different operational conditions
Head-to-head hydrodynamic performance comparison of six foil setups with four and two foil configurations on trimarans in different operational conditions
Achieving high efficiency and performance is essential in both the commercial and maritime sectors, where the selection of foil configurations significantly influences a vessel's o...
The heat treatment of invar
The heat treatment of invar
Abstract
Even though invar is the most common material used for the pendulum rod in a good clock, it is still a poor material for the purpose because of its relative...
7
th
International Symposium on Enabling Technologies for Life Sciences (ETP)
7
th
International Symposium on Enabling Technologies for Life Sciences (ETP)
The seventh in the series of ETP Symposia (see
Rapid Communications in Mass Spectrometry
2012,
26
, ...
Foil Bearing Design Guidelines for Improved Stability
Foil Bearing Design Guidelines for Improved Stability
Experimental evidence in the literature suggests that foil bearing-supported rotors can suffer from subsynchronous vibration. While dry friction between top foil and bump foil is t...
Evaluation of Coated Top Foil Bearings: Dry Friction, Drag Torque, and Dynamic Force Coefficients
Evaluation of Coated Top Foil Bearings: Dry Friction, Drag Torque, and Dynamic Force Coefficients
Despite their many advantages, bump-type foil bearings (BFBs) have issues of dry-friction during sliding contact at rotor start/stop cycles. To prevent premature wear of both shaft...