Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Floating Drilling Experience in Santa Barbara Channel, California

View through CrossRef
This paper was prepared for the 40th Annual California Regional Meeting of the Society of Petroleum Engineers of AIME, to be held in San Francisco, Calif., Nov. 6–7, 1969. Permission to copy is restricted to an abstract of not more than 300 words. Illustrations may not be copied. The abstract should contain conspicuous acknowledgment of where and by whom the paper is presented. Publication elsewhere after publication in the JOURNAL OF PETROLEUM TECHNOLOGY or the SOCIETY OF publication in the JOURNAL OF PETROLEUM TECHNOLOGY or the SOCIETY OF PETROLEUM ENGINEERS JOURNAL is usually granted upon request to the Editor PETROLEUM ENGINEERS JOURNAL is usually granted upon request to the Editor of the appropriate journal provided agreement to give proper credit is made. Discussion of this paper is invited. Three copies of any discussion should be sent to the Society of Petroleum Engineers office. Such discussion may be presented at the above meeting and, with the paper, may be considered for publication in one of the two SPE magazines. Abstract The equipment and practices for two floating drilling vessels working in water depths greater than 1000 feet in the Santa Barbara Channel have been designed to provide maximum reliability and safety. Experience to date has shown the systems to be efficient and to have met design criteria. Introduction Since the Federal Lease Sale in the Santa Barbara Channel of February 6, 1968, Humble has drilled fourteen wells with floating rigs in water depths ranging from 280 feet to 1300 feet. Although the water depth for some of these wells exceeds previous industry experience, the environment in the Channel is relatively mild. Historical data have indicated that the probable yearly maximum conditions in the central Santa Barbara Channel would not exceed: Five-minute average winds of 65 knots from the west and northwest or from the east and southeast. Significant wave heights of 16 feet with a period of 13 seconds. Maximum waves associated with this sea state would be about 30 feet. Surface or near surface currents of 2.4 knots parallel to the California coastline. The data have shown generally that these conditions occur for only a very small percentage of the time in winter months in the main part of the Channel east of Point Conception. Near the west end of the Channel, a yearly maximum significant wave height of 18 feet might occur with greater frequency.
Title: Floating Drilling Experience in Santa Barbara Channel, California
Description:
This paper was prepared for the 40th Annual California Regional Meeting of the Society of Petroleum Engineers of AIME, to be held in San Francisco, Calif.
, Nov.
6–7, 1969.
Permission to copy is restricted to an abstract of not more than 300 words.
Illustrations may not be copied.
The abstract should contain conspicuous acknowledgment of where and by whom the paper is presented.
Publication elsewhere after publication in the JOURNAL OF PETROLEUM TECHNOLOGY or the SOCIETY OF publication in the JOURNAL OF PETROLEUM TECHNOLOGY or the SOCIETY OF PETROLEUM ENGINEERS JOURNAL is usually granted upon request to the Editor PETROLEUM ENGINEERS JOURNAL is usually granted upon request to the Editor of the appropriate journal provided agreement to give proper credit is made.
Discussion of this paper is invited.
Three copies of any discussion should be sent to the Society of Petroleum Engineers office.
Such discussion may be presented at the above meeting and, with the paper, may be considered for publication in one of the two SPE magazines.
Abstract The equipment and practices for two floating drilling vessels working in water depths greater than 1000 feet in the Santa Barbara Channel have been designed to provide maximum reliability and safety.
Experience to date has shown the systems to be efficient and to have met design criteria.
Introduction Since the Federal Lease Sale in the Santa Barbara Channel of February 6, 1968, Humble has drilled fourteen wells with floating rigs in water depths ranging from 280 feet to 1300 feet.
Although the water depth for some of these wells exceeds previous industry experience, the environment in the Channel is relatively mild.
Historical data have indicated that the probable yearly maximum conditions in the central Santa Barbara Channel would not exceed: Five-minute average winds of 65 knots from the west and northwest or from the east and southeast.
Significant wave heights of 16 feet with a period of 13 seconds.
Maximum waves associated with this sea state would be about 30 feet.
Surface or near surface currents of 2.
4 knots parallel to the California coastline.
The data have shown generally that these conditions occur for only a very small percentage of the time in winter months in the main part of the Channel east of Point Conception.
Near the west end of the Channel, a yearly maximum significant wave height of 18 feet might occur with greater frequency.

Related Results

Drilling in 1300 Feet of Water - Santa Barbara Channel, California
Drilling in 1300 Feet of Water - Santa Barbara Channel, California
ABSTRACT Available technology and equipment have proven adequate for carrying out successful floating drilling operations in water depths to 1300 feet on Federal ...
JIT 2023 - Jornadas de Jóvenes Investigadores Tecnológicos
JIT 2023 - Jornadas de Jóvenes Investigadores Tecnológicos
Es un honor presentar este libro que compila los trabajos de investigación y desarrollo presentados en las Jornadas de Jóvenes Investigadores Tecnológicos (JIT) 2023. Este evento s...
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Drilling in deeper formations and in high pressure and high temperature (HPHT) environments is a new frontier for the oil industry. Fifty years ago, no one would have imagined dril...
Planning Drilling Fluid Programs in Southeast Asia
Planning Drilling Fluid Programs in Southeast Asia
Planning the drilling fluids program is one of the most important steps in Planning the drilling fluids program is one of the most important steps in preparation for the drilling o...
Comments on "Sailboats and Drilling Rigs" (Arthur O. Spaulding)
Comments on "Sailboats and Drilling Rigs" (Arthur O. Spaulding)
In the article, "Sailboats and Drilling Rigs" (May, 1968, JPT, Page 451) authors C. S. Hutchinson and L. K. Williams have done a splendid job in describing the agonies and conflict...
Casing Drilling with Retrievable Drilling Assemblies
Casing Drilling with Retrievable Drilling Assemblies
Abstract Retrievable Casing Drilling* tools have been used to drill more than 600,000 ft of hole in over 120 wells encompassing six casing sizes ranging from 4-1/...
En skvatmølle i Ljørring
En skvatmølle i Ljørring
A Horizontal Mill at Ljørring, Jutland.Horizontal water-mills have been in use in Jutland since the beginning of the Christian era 2). But the one here described shows so close a c...
Pit Less Drilling Significantly Reduces Wells Environmental Footprint
Pit Less Drilling Significantly Reduces Wells Environmental Footprint
Abstract Pit less Drilling technology is a technology that eliminates the requirement for earthen pits or sumps to capture waste fluid. In this paper we will examine...

Back to Top