Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Solderability Testing in Hybrid Technology
View through CrossRef
The solderability of a material is considered as the ability of the surface to be wetted by solder, and the rate at which this process occurs. The solderability of thick film conductors based on palladium—silver, by Pb/Sn/Ag solder, was evaluated using a meniscograph. The influence of the composition of the conductor and that of the temperature of the solderbath on the solderability were measured. The usefulness of meniscographic data for the production line is indicated by showing the relation between the production data, reported as the rate at which a full automated solder machine is operated, and the meniscographic results.
Title: Solderability Testing in Hybrid Technology
Description:
The solderability of a material is considered as the ability of the surface to be wetted by solder, and the rate at which this process occurs.
The solderability of thick film conductors based on palladium—silver, by Pb/Sn/Ag solder, was evaluated using a meniscograph.
The influence of the composition of the conductor and that of the temperature of the solderbath on the solderability were measured.
The usefulness of meniscographic data for the production line is indicated by showing the relation between the production data, reported as the rate at which a full automated solder machine is operated, and the meniscographic results.
Related Results
Solderability Testing Protocols and Component Re-Tinning Methods for the 21st Century
Solderability Testing Protocols and Component Re-Tinning Methods for the 21st Century
ABSTRACT
In 1983 the Department of Defense (DoD) determined that over 40% of military electronics system field failures were electrical in nature and some 50% of ...
Solderability Changes of Printed Wiring Board Surfaces during Electronic Assembly Operations
Solderability Changes of Printed Wiring Board Surfaces during Electronic Assembly Operations
Today's electronic assembly manufacturing operations can be complex combinations of process steps such as IR reflow, wave soldering, special soldering of connectors or sensitive co...
Nanogold and nanosilver hybrid polymer materials
Nanogold and nanosilver hybrid polymer materials
<p>Significant opportunities exist in both the scientific and industrial sectors for the development of new generation hybrid materials. These multifunctional hybrid material...
Modifikasi Model Rak Alat Pengering Tipe Hybrid Pada Pengeringan Ikan Keumamah
Modifikasi Model Rak Alat Pengering Tipe Hybrid Pada Pengeringan Ikan Keumamah
Abstrak. Pengeringan hybrid merupakan pengeringan yang menggunakan dua atau lebih sumber energi untuk proses penguapan air. Teknologi ini merupakan alternatif teknologi untuk penge...
EPD Electronic Pathogen Detection v1
EPD Electronic Pathogen Detection v1
Electronic pathogen detection (EPD) is a non - invasive, rapid, affordable, point- of- care test, for Covid 19 resulting from infection with SARS-CoV-2 virus. EPD scanning techno...
Lead Tinning Requirements for the 21St Century
Lead Tinning Requirements for the 21St Century
ABSTRACT
The solderability of components in the process of manufacturing printed circuit assemblies is key to the longevity and reliability of the finished produc...
The Rice (Oryza Sativa L.) Rc Gene, Which Imparts Resistance To Pre-Harvest Sprouting, Retains Seed and Milled Rice Quality
The Rice (Oryza Sativa L.) Rc Gene, Which Imparts Resistance To Pre-Harvest Sprouting, Retains Seed and Milled Rice Quality
Abstract
Pre-harvest sprouting (PHS) in cereal crops, including rice ( Oryza sativa L.), causes substantial yield and end-use quality losses worldwide. These losses could b...
THE CONCEPT OF HYBRID THREATS
THE CONCEPT OF HYBRID THREATS
In 2016, during the Warsaw summit, NATO and EU reached an agreement to improve the cooperation in the fight against the hybrid threats, describing the security situation in Europe ...