Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Comparison Between a Fundus Camera and Scanning Laser Ophthalmoscope in Acquiring Fluorescence Emission In Vitro

View through CrossRef
<H4>BACKGROUND AND OBJECTIVES</H4> <P>To compare the fluorescence measurements acquired from a fundus camera with those from a scanning laser ophthalmoscope (SLO) camera. </P> <H4>MATERIALS AND METHODS</H4> <P> The fundus camera and the SLO camera were used to capture images of 29 cuvettes each containing serially diluted sodium fluorescein dye in normal saline. The intensity levels of the resulting images were plotted as a function of concentration to compare the two cameras. Ten samples of serially diluted indocyanine green (ICG) dye in bovine serum were also measured. </P> <H4>RESULTS </H4> <P>Both cameras revealed that fluorescence intensity varied as a function of the logarithmic concentration of the dye, independent of the actual dye used, with expected decrease in fluorescence at very high concentrations of dye due to quenching of fluorescence. There were very small variations on repeated trials with the fundus camera, whereas the SLO camera exhibited marked variability, particularly at higher concentrations of dye. Measurements acquired with the SLO camera varied as a function of time, which did not occur with the fundus camera. The image averaging software on the SLO camera caused shifts in the grayscale values measured that depended on the initial amount of fluorescence measured in the raw samples. </P> <H4>CONCLUSIONS</H4> <P>Although these differences may cause modest qualitative differences in imaging the ocular fundus, the variation in data obtained from the SLO camera would seem problematic if quantification of the amounts of fluorescence is required. </P> <P>[<CITE>Ophthalmic Surg Lasers Imaging</CITE> 2007;38:50-55.] </P> <H4>AUTHORS</H4> <P>From the Vitreous, Retina, Macula Consultants of New York; and the LuEsther T. Mertz Retina Research Laboratory, Manhattan Eye, Ear, and Throat Hospital, New York, New York. </P> <P>Accepted for publication September 18, 2006. </P> <P>Address correspondence to Richard F. Spaide, MD, 460 Park Avenue, 5th Floor, New York, NY 10022. </P>
Title: Comparison Between a Fundus Camera and Scanning Laser Ophthalmoscope in Acquiring Fluorescence Emission In Vitro
Description:
<H4>BACKGROUND AND OBJECTIVES</H4> <P>To compare the fluorescence measurements acquired from a fundus camera with those from a scanning laser ophthalmoscope (SLO) camera.
</P> <H4>MATERIALS AND METHODS</H4> <P> The fundus camera and the SLO camera were used to capture images of 29 cuvettes each containing serially diluted sodium fluorescein dye in normal saline.
The intensity levels of the resulting images were plotted as a function of concentration to compare the two cameras.
Ten samples of serially diluted indocyanine green (ICG) dye in bovine serum were also measured.
</P> <H4>RESULTS </H4> <P>Both cameras revealed that fluorescence intensity varied as a function of the logarithmic concentration of the dye, independent of the actual dye used, with expected decrease in fluorescence at very high concentrations of dye due to quenching of fluorescence.
There were very small variations on repeated trials with the fundus camera, whereas the SLO camera exhibited marked variability, particularly at higher concentrations of dye.
Measurements acquired with the SLO camera varied as a function of time, which did not occur with the fundus camera.
The image averaging software on the SLO camera caused shifts in the grayscale values measured that depended on the initial amount of fluorescence measured in the raw samples.
</P> <H4>CONCLUSIONS</H4> <P>Although these differences may cause modest qualitative differences in imaging the ocular fundus, the variation in data obtained from the SLO camera would seem problematic if quantification of the amounts of fluorescence is required.
</P> <P>[<CITE>Ophthalmic Surg Lasers Imaging</CITE> 2007;38:50-55.
] </P> <H4>AUTHORS</H4> <P>From the Vitreous, Retina, Macula Consultants of New York; and the LuEsther T.
Mertz Retina Research Laboratory, Manhattan Eye, Ear, and Throat Hospital, New York, New York.
</P> <P>Accepted for publication September 18, 2006.
</P> <P>Address correspondence to Richard F.
Spaide, MD, 460 Park Avenue, 5th Floor, New York, NY 10022.
</P>.

Related Results

Machine Learning Techniques for Forensic Camera Model Identification and Anti-forensic Attacks
Machine Learning Techniques for Forensic Camera Model Identification and Anti-forensic Attacks
The goal of camera model identification is to determine the manufacturer and model of an image's source camera. Camera model identification is an important task in multimedia foren...
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
In recent years, more than 90% of the signal laser power can be up-converted based on the high-efficiency double resonant external cavity sum-frequency generation (SFG), especially...
Enhanced scanning control in a confocal scanning laser microscope
Enhanced scanning control in a confocal scanning laser microscope
AbstractA fast and flexible scanning unit, allowing scanning rates of more than 1 kHz over regions identified in a specimen, has been developed and evaluated. This scanning unit re...
Enhanced scanning control in a confocal scanning laser microscope
Enhanced scanning control in a confocal scanning laser microscope
AbstractA fast and flexible scanning unit, allowing scanning rates of more than 1 kHz over regions identified in a specimen, has been developed and evaluated. This scanning unit re...
Excimer Laser Micromachining of MEMS Materials
Excimer Laser Micromachining of MEMS Materials
Conventional photolithography-based microfabrication techniques are limited to two-dimensional fabrication and only particular materials can be used. Excimer laser micromachining e...
Laser show safety for smaller shows: The ILDA category a laser show standard
Laser show safety for smaller shows: The ILDA category a laser show standard
The International Laser Display Association has developed a “Category A Standard” for laser shows that ILDA considers to be generally recognized as safe under the conditions of the...
Vitreous surgery combined with internal limiting membrane peeling for traumatic macular hole with severe retinal folds
Vitreous surgery combined with internal limiting membrane peeling for traumatic macular hole with severe retinal folds
ABSTRACT.Purpose: To report a case of a traumatic macular hole with severe retinal folds in which vitreous surgery combined with internal limiting membrane (ILM) peeling was benefi...
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
The continuous development of laser sources delivering ultra-short light pulses underpins much of the current progress in experimental science, particularly in the domain of physic...

Back to Top