Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Mixed versus Networked Bio-Based PA56/Polyethylene Terephthalate Composite Yarns: A Study of Two Modification Methods

View through CrossRef
Two bio-based PA56/PET composite yarns were manufactured in this study, namely, the mixed and networked composite yarns, by using different modification methods. The results showed that the effect of mixing modification by adding the bio-based PA56 into PET was unsatisfactory. When the ratio of the added bio-based PA56 was smaller than 30%, the modification effect was insignificant; while the ratio was above 30%, the dispersion uniformity was very poor. There were also the problems of the fast rise of pressure in the component and pre-filter, short life cycle, a large number of broken ends, and low production efficiency. Then the bio-based PA56 and PET drawn false- twist textured yarns (DTY) were respectively prepared and manufactured into networked composite yarns. The manufacturing of the networked composite yarns went smoothly. The fabrics woven with the networked composite yarns achieved shade variation with one dye.
Title: Mixed versus Networked Bio-Based PA56/Polyethylene Terephthalate Composite Yarns: A Study of Two Modification Methods
Description:
Two bio-based PA56/PET composite yarns were manufactured in this study, namely, the mixed and networked composite yarns, by using different modification methods.
The results showed that the effect of mixing modification by adding the bio-based PA56 into PET was unsatisfactory.
When the ratio of the added bio-based PA56 was smaller than 30%, the modification effect was insignificant; while the ratio was above 30%, the dispersion uniformity was very poor.
There were also the problems of the fast rise of pressure in the component and pre-filter, short life cycle, a large number of broken ends, and low production efficiency.
Then the bio-based PA56 and PET drawn false- twist textured yarns (DTY) were respectively prepared and manufactured into networked composite yarns.
The manufacturing of the networked composite yarns went smoothly.
The fabrics woven with the networked composite yarns achieved shade variation with one dye.

Related Results

Montmorillonite-reinforced nanocomposite from off-grade plastics materials using response surface analysis
Montmorillonite-reinforced nanocomposite from off-grade plastics materials using response surface analysis
Off-grade thermoplastic poly(ethylene terephthalate) of industrial manufacturers was partially depolymerized to synthesize poly(ethylene terephthalate) oligomers. Influences of rea...
Emotions and Networked Learning
Emotions and Networked Learning
Emotions in networked learning have been underresearched despite their importance. The present research is one of the first few attempts to better understand adult learners’ emotio...
Properties of Wool/PET Composite Yarns
Properties of Wool/PET Composite Yarns
This paper reports an investigation of the differences in structures and mechanical properties of two kinds of composite yarns and of conventional two-ply staple yarns. The cross s...
Postcolonial Entry Points into Networked Learning
Postcolonial Entry Points into Networked Learning
It would be overly simplistic to assume that these collaborative pedagogical approaches function uniformly across diverse student cohorts. Postcolonial theory can provide a framewo...
The study of strain proprieties of woolen yarns mixed with elastomer, bleached and coloured
The study of strain proprieties of woolen yarns mixed with elastomer, bleached and coloured
Textile yarns have mechanical properties that enable their transformation using woven, knitted structures or other procedures into textile products. Tensile strength is one of the ...
Elastic and viscoelastic behaviour of sandwich panels with glass-fibre reinforced polymer faces and polyethylene terephthalate foam core
Elastic and viscoelastic behaviour of sandwich panels with glass-fibre reinforced polymer faces and polyethylene terephthalate foam core
This paper presents experimental and analytical investigations about the elastic and viscoelastic (creep) behaviour of sandwich panels made of glass-fibre reinforced polymer faces ...

Back to Top