Javascript must be enabled to continue!
Acoustic Emission Monitoring of Atmospheric Corrosion on Aluminum Aircraft Structures at Varying Relative Humidity
View through CrossRef
Atmospheric corrosion of aluminum aircraft structures occurs due to numerous reasons. A typical phenomenon leading to corrosion is the deliquescence of contaminants such as salts due to changes in relative humidity (RH) caused by aircraft operation at different altitudes and climate zones. Currently, corrosion of aircrafts is controlled by scheduled inspections. In contrast, the present contribution aims for a continuous monitoring approach by using the acoustic emission (AE) method to detect and further evaluate atmospheric corrosion. The AE method is frequently used for corrosion detection at typically immersion-like conditions or for corrosion types where stress-induced cracking is involved. However, it has not yet been demonstrated for atmospheric corrosion at unloaded aluminum structures. To address this question, the present investigation uses small droplets of a corrosive sodium chloride (NaCl) solution to induce atmospheric corrosion on aluminum alloy AA2024-T351. Operating conditions of an aircraft are simulated by a controlled variation in RH. In addition, videos of the corrosion site are recorded to visually observe the corrosion process. Pitting corrosion is generated and clearly measurable AE signals are detected. An automatic video processing algorithm looking for sudden changes on the corrosion site mainly detects hydrogen bubbles formed when aluminum reacts with aqueous solutions. A clear correlation between the observed pitting corrosion, the AE and the hydrogen bubble activity and the RH, i.e., the electrolyte present at the aluminum surface, is found. Thus, the findings demonstrate the applicability of the AE method for monitoring atmospheric corrosion of aluminum aircraft structures by today’s measurement equipment. Numerous potential effects that can cause measurable AE signals are investigated and discussed. Among these, bubble activity is clearly considered to be the most emissive one.
Title: Acoustic Emission Monitoring of Atmospheric Corrosion on Aluminum Aircraft Structures at Varying Relative Humidity
Description:
Atmospheric corrosion of aluminum aircraft structures occurs due to numerous reasons.
A typical phenomenon leading to corrosion is the deliquescence of contaminants such as salts due to changes in relative humidity (RH) caused by aircraft operation at different altitudes and climate zones.
Currently, corrosion of aircrafts is controlled by scheduled inspections.
In contrast, the present contribution aims for a continuous monitoring approach by using the acoustic emission (AE) method to detect and further evaluate atmospheric corrosion.
The AE method is frequently used for corrosion detection at typically immersion-like conditions or for corrosion types where stress-induced cracking is involved.
However, it has not yet been demonstrated for atmospheric corrosion at unloaded aluminum structures.
To address this question, the present investigation uses small droplets of a corrosive sodium chloride (NaCl) solution to induce atmospheric corrosion on aluminum alloy AA2024-T351.
Operating conditions of an aircraft are simulated by a controlled variation in RH.
In addition, videos of the corrosion site are recorded to visually observe the corrosion process.
Pitting corrosion is generated and clearly measurable AE signals are detected.
An automatic video processing algorithm looking for sudden changes on the corrosion site mainly detects hydrogen bubbles formed when aluminum reacts with aqueous solutions.
A clear correlation between the observed pitting corrosion, the AE and the hydrogen bubble activity and the RH, i.
e.
, the electrolyte present at the aluminum surface, is found.
Thus, the findings demonstrate the applicability of the AE method for monitoring atmospheric corrosion of aluminum aircraft structures by today’s measurement equipment.
Numerous potential effects that can cause measurable AE signals are investigated and discussed.
Among these, bubble activity is clearly considered to be the most emissive one.
Related Results
Research on Acoustic Emission Source Localization Technology Based on AI Deep Learning
Research on Acoustic Emission Source Localization Technology Based on AI Deep Learning
Acoustic emission source localization is the basic function of the application of acoustic emission technology. For complex structures, mathematical analysis positioning algorithms...
Propagation of biases in humidity in the estimation of global irrigation water
Propagation of biases in humidity in the estimation of global irrigation water
Abstract. Future projections on irrigation water under a changing climate are highly dependent on meteorological data derived from general circulation models (GCMs). Since climate ...
Two-dimensional numerical analysis of differential concentration corrosion in seawater pipeline
Two-dimensional numerical analysis of differential concentration corrosion in seawater pipeline
Purpose
The purpose of this paper is to develop a new two-dimensional differential concentration corrosion mathematical model based on the knowledge that oxygen distribution on the...
Propagation of biases in humidity in the estimation of global irrigational water
Propagation of biases in humidity in the estimation of global irrigational water
Abstract. Future projections on irrigational water under a changing climate are highly dependent on meteorological data derived from general circulation models (GCMs). Since climat...
Evaluating Corrosion Inhibitors For Sour Gas Subsea Pipelines
Evaluating Corrosion Inhibitors For Sour Gas Subsea Pipelines
Abstract
Using subsea carbon steel pipelines to transport wet sour gas possesses huge challenges to the operators to maintain the high level of the Assets and Ope...
(Invited) Rust Design for Corrosion Protection of Steel Exposed to Atmospheric and Marine Environments
(Invited) Rust Design for Corrosion Protection of Steel Exposed to Atmospheric and Marine Environments
Steel materials have been used in many fields as basic materials for infrastructures due to their superior strength and toughness. However, steel is significantly more susceptible ...
Monitoring of Downhole Corrosion: An Overview
Monitoring of Downhole Corrosion: An Overview
Abstract
Wet sour crude oil wells usually require minor attention to minimize or prevent corrosion damage of the production tubulars and well casings. These wells co...
Clustering Analysis of Acoustic Emission Signals Based on Unsupervised Deep Learning
Clustering Analysis of Acoustic Emission Signals Based on Unsupervised Deep Learning
In order to improve the automation degree of detecting and determining the damage types of metal structures by acoustic emission signals, starting from the acoustic emission charac...

