Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Experimental investigation of abrasive potential and drilling efficiency at elevated temperatures via Cerchar rock scratching
View through CrossRef
AbstractTo see if and how abrasive potential as well as drilling efficiency change due to rock heating, Cerchar scratch tests were performed on six types of rock at eight temperature levels. Results indicate that rock abrasivity is temperature-dependent. The change of rock abrasivity expressed by the Cerchar abrasivity index can be divided into two stages on either side of 500 °C. Meanwhile, the drilling efficiency expressed by the Cerchar abrasion ratio can significantly be enhanced, especially when the heating temperature exceeds 500 °C. The observation of damaged surfaces indicates that the material volume removed from the rock surface increase after rock heating. The worn steel surfaces (115CrV3 tool steel) shows the severe plastic deformation and fracturing associated with cracking, delamination, dislocation and chipping of the steel.
Springer Science and Business Media LLC
Title: Experimental investigation of abrasive potential and drilling efficiency at elevated temperatures via Cerchar rock scratching
Description:
AbstractTo see if and how abrasive potential as well as drilling efficiency change due to rock heating, Cerchar scratch tests were performed on six types of rock at eight temperature levels.
Results indicate that rock abrasivity is temperature-dependent.
The change of rock abrasivity expressed by the Cerchar abrasivity index can be divided into two stages on either side of 500 °C.
Meanwhile, the drilling efficiency expressed by the Cerchar abrasion ratio can significantly be enhanced, especially when the heating temperature exceeds 500 °C.
The observation of damaged surfaces indicates that the material volume removed from the rock surface increase after rock heating.
The worn steel surfaces (115CrV3 tool steel) shows the severe plastic deformation and fracturing associated with cracking, delamination, dislocation and chipping of the steel.
Related Results
Bestimmung der Abrasivität von Gesteinen mit dem CERCHAR‐Versuch
Bestimmung der Abrasivität von Gesteinen mit dem CERCHAR‐Versuch
AbstractDer Arbeitskreis AK 3.3 “Versuchstechnik Fels” der Deutschen Gesellschaft für Geotechnik e. V. erarbeitet Empfehlungen für felsmechanische Labor‐ und Feldversuche sowie Mes...
ANALISA UMUR PAKAI (LIFETIME) BALL BEARING TIPE UCF 4 BOLT FLANGE UNIT PADA MESIN SPIN COATING ABRASIVE CLUTCH TEST DI PT XY
ANALISA UMUR PAKAI (LIFETIME) BALL BEARING TIPE UCF 4 BOLT FLANGE UNIT PADA MESIN SPIN COATING ABRASIVE CLUTCH TEST DI PT XY
ABSTRACTSpin Coating Abrasive Clutch Test Machine is a machine for testing abrasive clucth on clutch components of PT.XY four-wheeled clutch. One component that plays an important ...
Drilling-Induced Fractures in Borehole Walls
Drilling-Induced Fractures in Borehole Walls
Summary
Drilling-induced fractures in borehole walls are investigated by ring tests, flow tests, and microscopic studies. Each drilling method producescharacteris...
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Drilling in deeper formations and in high pressure and high temperature (HPHT) environments is a new frontier for the oil industry. Fifty years ago, no one would have imagined dril...
Study on Density and Chloride Ion Concentration of Undersaturated Brine Drilling Fluid in Ultra-Deep Gypsum-Salt Rock Formation with Weak Interlayers
Study on Density and Chloride Ion Concentration of Undersaturated Brine Drilling Fluid in Ultra-Deep Gypsum-Salt Rock Formation with Weak Interlayers
ABSTRACT
The ultra-deep gypsum-salt rock formation with weak interlayers often has two complicated conditions: blockage and lost circulation, and the window of sa...
STUDY OF THE DYNAMİCS OF THE İMPACT OF DRİLLİNG FLUİD SLURRY ON THE WELL
BOTTOM
STUDY OF THE DYNAMİCS OF THE İMPACT OF DRİLLİNG FLUİD SLURRY ON THE WELL
BOTTOM
Currently, the study of the effect of drilling fluid slurry on the well bottom during the drilling of oil and gas wells remains one of the urgent problems in the center of attentio...
Drilling Variables At Technical Limit Of Drilling Rate
Drilling Variables At Technical Limit Of Drilling Rate
Abstract
Recorded drilling times may show significant variations from well to well even for the same total depth in the same field. Apart from the formation chara...
Inspection of Subsea Conductors Using an Innovative Drop-Down Camera
Inspection of Subsea Conductors Using an Innovative Drop-Down Camera
Abstract
Subsea conductors are the foundational elements of offshore drilling operations, serving a dual purpose as both the structural framework and the main condui...