Javascript must be enabled to continue!
A Network Slicing Framework for UAV-Aided Vehicular Networks
View through CrossRef
In a fifth generation (5G) vehicular network architecture, several point of access (PoA) types, including both road side units (RSUs) and aerial relay nodes (ARNs), can be leveraged to undertake the service of an increasing number of vehicular users. In such an architecture, the application of efficient resource allocation schemes is indispensable. In this direction, this paper describes a network slicing scheme for 5G vehicular networks that aims to optimize the performance of modern network services. The proposed architecture consists of ground RSUs and unmanned aerial vehicles (UAVs) acting as ARNs enabling the communication between ground vehicular nodes and providing additional communication resources. Both RSUs and ARNs implement the LTE vehicle-to-everything (LTE-V2X) technology, while the position of each ARN is optimized by applying a fuzzy multi-attribute decision-making (fuzzy MADM) technique. With regard to the proposed network architecture, each RSU maintains a local virtual resource pool (LVRP) which contains local RBs (LRBs) and shared RBs (SRBs), while an SDN controller maintains a virtual resource pool (VRP), where the SRBs of the RSUs are stored. In addition, each ARN maintains its own resource blocks (RBs). For users connected to the RSUs, if the remaining RBs of the current RSU can satisfy the predefined threshold value, the LRBs of the RSU are allocated to user services. On the contrary, if the remaining RBs of the current RSU cannot satisfy the threshold, extra RBs from the VRP are allocated to user services. Similarly, for users connected to ARNs, the satisfaction grade of each user service is monitored considering both the QoS and the signal-to-noise plus interference (SINR) factors. If the satisfaction grade is higher than the predefined threshold value, the service requirements can be satisfied by the remaining RBs of the ARN. On the contrary, if the estimated satisfaction grade is lower than the predefined threshold value, the ARN borrows extra RBs from the LVRP of the corresponding RSU to achieve the required satisfaction grade. Performance evaluation shows that the suggested method optimizes the resource allocation and improves the performance of the offered services in terms of throughput, packet transfer delay, jitter and packet loss ratio, since the use of ARNs that obtain optimal positions improves the channel conditions observed from each vehicular user.
Title: A Network Slicing Framework for UAV-Aided Vehicular Networks
Description:
In a fifth generation (5G) vehicular network architecture, several point of access (PoA) types, including both road side units (RSUs) and aerial relay nodes (ARNs), can be leveraged to undertake the service of an increasing number of vehicular users.
In such an architecture, the application of efficient resource allocation schemes is indispensable.
In this direction, this paper describes a network slicing scheme for 5G vehicular networks that aims to optimize the performance of modern network services.
The proposed architecture consists of ground RSUs and unmanned aerial vehicles (UAVs) acting as ARNs enabling the communication between ground vehicular nodes and providing additional communication resources.
Both RSUs and ARNs implement the LTE vehicle-to-everything (LTE-V2X) technology, while the position of each ARN is optimized by applying a fuzzy multi-attribute decision-making (fuzzy MADM) technique.
With regard to the proposed network architecture, each RSU maintains a local virtual resource pool (LVRP) which contains local RBs (LRBs) and shared RBs (SRBs), while an SDN controller maintains a virtual resource pool (VRP), where the SRBs of the RSUs are stored.
In addition, each ARN maintains its own resource blocks (RBs).
For users connected to the RSUs, if the remaining RBs of the current RSU can satisfy the predefined threshold value, the LRBs of the RSU are allocated to user services.
On the contrary, if the remaining RBs of the current RSU cannot satisfy the threshold, extra RBs from the VRP are allocated to user services.
Similarly, for users connected to ARNs, the satisfaction grade of each user service is monitored considering both the QoS and the signal-to-noise plus interference (SINR) factors.
If the satisfaction grade is higher than the predefined threshold value, the service requirements can be satisfied by the remaining RBs of the ARN.
On the contrary, if the estimated satisfaction grade is lower than the predefined threshold value, the ARN borrows extra RBs from the LVRP of the corresponding RSU to achieve the required satisfaction grade.
Performance evaluation shows that the suggested method optimizes the resource allocation and improves the performance of the offered services in terms of throughput, packet transfer delay, jitter and packet loss ratio, since the use of ARNs that obtain optimal positions improves the channel conditions observed from each vehicular user.
Related Results
Design and Performance Evaluation of a Cashew Apple (Anacardium occidentale L.) Slicing Machine
Design and Performance Evaluation of a Cashew Apple (Anacardium occidentale L.) Slicing Machine
One challenge in cashew apple (CA) production is the absence of processing equipment, leading to manual operations. Cashew apple processors often resort to manual slicing, resultin...
Converged RAN/MEC slicing in beyond 5G (B5G) networks
Converged RAN/MEC slicing in beyond 5G (B5G) networks
(English) The main objective of this thesis is to propose solutions for implementing dynamic RAN slicing and Functional Split (FS) along with MEC placements in 5G/B5G. In particula...
Joint Energy and Performance Aware Relay Positioning in Flying Networks
Joint Energy and Performance Aware Relay Positioning in Flying Networks
<p>Unmanned Aerial Vehicles (UAVs) have emerged as suitable platforms for transporting and positioning communications nodes on demand, including Wi-Fi Access Points and cellu...
RIS-Enabled UAV Communications and Sensing: Opportunities, Challenges, and Key Technologies
RIS-Enabled UAV Communications and Sensing: Opportunities, Challenges, and Key Technologies
Unmanned Aerial Vehicles (UAV) play a critical role in the low-altitude economy; however, they face significant challenges in network coverage during transit. This paper investigat...
Quantifying corn emergence using UAV imagery and machine learning
Quantifying corn emergence using UAV imagery and machine learning
Corn (Zea mays L.) is one of the important crops in the United States for animal feed, ethanol production, and human consumption. To maximize the final corn yield, one of the criti...
ACOUSTIC FIELD CHARACTERISTICS UAV SCREW
ACOUSTIC FIELD CHARACTERISTICS UAV SCREW
Unmanned aerial vehicles (UAVs) began to be actively used in civil and military spheres. During flight, UAV nodes emit noise into the environment, while the main radiation node is ...
The Geography of Cyberspace
The Geography of Cyberspace
The Virtual and the Physical
The structure of virtual space is a product of the Internet’s geography and technology. Debates around the nature of the virtual — culture, s...
A Dynamic Restructuring Algorithm Based on Flexible PON Slices
A Dynamic Restructuring Algorithm Based on Flexible PON Slices
In recent years, with the introduction of the concept of the Internet of Things, a large number of terminals connected to the network, the pressure of network bandwidth is increasi...


