Javascript must be enabled to continue!
Growth mechanisms of dendrites and eutectics within undercooled liquid Al-Ni alloys
View through CrossRef
Al-4 wt.%Ni (hypoeutectic), Al-5.69 wt.%Ni (eutectic) and Al-8 wt.%Ni (hypereutectic) liquid alloys are highly undercooled and rapidly solidified under free fall condition. Theoretical calculations indicate that the coupled zone of (Al+Al3 Ni) fibrous eutectic is an unclosed region in the composition range from 4.8 to 15 wt.% Ni, which is strongly skewed towards the Al3 Ni phase side. It is found that the cooling rate and undercooling of liquid alloys would increase as the droplet size decreases. Then the microstructural evolution of Al-Ni alloys will be induced by the competitive growth of (Al) dendrite, Al3 Ni dendrite, and (Al+Al3 Ni) eutectic. During the rapid solidification of Al-4 wt.%Ni hypoeutectic alloy, complete solute trapping effect occurs and then causes the formation of metastable segregationless (Al) solid solution phase. When the droplet undercooling exceeds 58 K, the structural morphology of Al-5.69 wt.%Ni eutectic alloy shows a transition from (Al+Al3 Ni) fibrous eutectic to primary phase (Al)-dominated hypoeutectic structure. As the undercooling increases further, the fibrous eutectic becomes the unique microstructure of Al-8 wt.%Ni hypereutectic alloy, and finally evolves into a kind of granular eutectic.
Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
Title: Growth mechanisms of dendrites and eutectics within undercooled liquid Al-Ni alloys
Description:
Al-4 wt.
%Ni (hypoeutectic), Al-5.
69 wt.
%Ni (eutectic) and Al-8 wt.
%Ni (hypereutectic) liquid alloys are highly undercooled and rapidly solidified under free fall condition.
Theoretical calculations indicate that the coupled zone of (Al+Al3 Ni) fibrous eutectic is an unclosed region in the composition range from 4.
8 to 15 wt.
% Ni, which is strongly skewed towards the Al3 Ni phase side.
It is found that the cooling rate and undercooling of liquid alloys would increase as the droplet size decreases.
Then the microstructural evolution of Al-Ni alloys will be induced by the competitive growth of (Al) dendrite, Al3 Ni dendrite, and (Al+Al3 Ni) eutectic.
During the rapid solidification of Al-4 wt.
%Ni hypoeutectic alloy, complete solute trapping effect occurs and then causes the formation of metastable segregationless (Al) solid solution phase.
When the droplet undercooling exceeds 58 K, the structural morphology of Al-5.
69 wt.
%Ni eutectic alloy shows a transition from (Al+Al3 Ni) fibrous eutectic to primary phase (Al)-dominated hypoeutectic structure.
As the undercooling increases further, the fibrous eutectic becomes the unique microstructure of Al-8 wt.
%Ni hypereutectic alloy, and finally evolves into a kind of granular eutectic.
Related Results
Solidification of undercooled molten Cu30Ni70
Solidification of undercooled molten Cu30Ni70
Recently, it was demonstrated that grain refinement in undercooled Cu30Ni70 is brought about by a remelting of those initially formed dendrites (termed novel dendrites) which are u...
Undercooling of Liquid Germanium
Undercooling of Liquid Germanium
AbstractSmall liquid germanium (ℓ-Ge) droplets (0.3–0.5mm diameter) have been undercooled in a B2O3 flux a maximum of 415 ± 20°C below Tm before recalescence. Although the droplets...
Dendrite growth and Vickers microhardness of Co7Mo6 intermetallic compound under large undercooling condition
Dendrite growth and Vickers microhardness of Co7Mo6 intermetallic compound under large undercooling condition
The dendritic growth process and Vickers microhardness enhancement of primary Co7Mo6 phase in undercooled liquid Co-50%Mo hypereutectic alloy are systematically investigated by usi...
Diffusion and its Application in NiMnGa Alloys
Diffusion and its Application in NiMnGa Alloys
Heusler NiMnGa alloys are often categorized as ferromagnetic shape memory alloys or magnetocaloric materials, which are important for both practical applications and fundamental re...
Design of Ascorbic Acid Eutectic Mixtures With Sugars to Inhibit Oxidative Degradation
Design of Ascorbic Acid Eutectic Mixtures With Sugars to Inhibit Oxidative Degradation
L-Ascorbic acid (ASC), commonly known as vitamin C, acts as an anti-oxidant in the biological system. It is extensively used as an excipient in pharmaceutical industry, food supple...
Kinetic Competition in Undercooled Liquid Alloys
Kinetic Competition in Undercooled Liquid Alloys
ABSTRACTMost alloy systems can develop more than one solid phase for a given composition during solidification. For metastable undercooled liquids a thermodynamic analysis can prov...
Corrosion Protection Application of Liquid-Infused Surface with Regional Growth of LDH Films on Al Alloys
Corrosion Protection Application of Liquid-Infused Surface with Regional Growth of LDH Films on Al Alloys
Al alloys with their easy accessibility and good workability have been extensively used in oceanic engineering area [1]. However, corrosion failure of Al alloys is a major challeng...
Lithium Dendrite Suppression through Controlled Mass Transfer
Lithium Dendrite Suppression through Controlled Mass Transfer
Lithium dendrite formation is a critical challenge that limits the lifetime of lithium (Li) metal batteries including lithium oxygen, and lithium sulfur systems. Dendrite growth oc...

