Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Microstructure Design and Properties of X100 Gas Line Pipe
View through CrossRef
Abstract
The microstructure evolution process of X100 pipeline steel is analysed, and the influence of different alloy composition and accelerated cooling process on microstructure evolution is studied in this article. It is obtained that acicular ferrite microstructure can make the yield strength of steel reach 650 MPa through micro alloying and thermo-mechanical control process(TMCP) with the comprehensive reinforcement effect of grain refinement, micro-alloying element precipitates and dislocation substructure. Acicular ferrite has the characteristics of fine grain, cross distribution, large angle grain boundary and presence of sub structure and high density movable dislocation. Test results of product quality also show that X100 pipeline steel which adopts Mn-Nb-Ti component system with a small amount of Ni (V), Mo alloy addition and TMCP process has obvious characteristics of fine grain. The Matrix is consisted of granular bainite and appropriate amount of MA as dispersion phase, which makes the tensile strength reach more than 800 Mpa. At the same time, the X100 pipeline steel has the characteristics of high toughness and good weldability, which is beneficial to ensure the safe operation of high pressure natural gas pipeline.
Title: Microstructure Design and Properties of X100 Gas Line Pipe
Description:
Abstract
The microstructure evolution process of X100 pipeline steel is analysed, and the influence of different alloy composition and accelerated cooling process on microstructure evolution is studied in this article.
It is obtained that acicular ferrite microstructure can make the yield strength of steel reach 650 MPa through micro alloying and thermo-mechanical control process(TMCP) with the comprehensive reinforcement effect of grain refinement, micro-alloying element precipitates and dislocation substructure.
Acicular ferrite has the characteristics of fine grain, cross distribution, large angle grain boundary and presence of sub structure and high density movable dislocation.
Test results of product quality also show that X100 pipeline steel which adopts Mn-Nb-Ti component system with a small amount of Ni (V), Mo alloy addition and TMCP process has obvious characteristics of fine grain.
The Matrix is consisted of granular bainite and appropriate amount of MA as dispersion phase, which makes the tensile strength reach more than 800 Mpa.
At the same time, the X100 pipeline steel has the characteristics of high toughness and good weldability, which is beneficial to ensure the safe operation of high pressure natural gas pipeline.
Related Results
Optimized Design of Pipe-in-Pipe Systems
Optimized Design of Pipe-in-Pipe Systems
Abstract
Deepwater subsea developments must address the flow assurance issues and increasingly these are forming a more critical part of the design. Pipe-in-pipe ...
Cumulative Fatigue Damage of Drill Pipe in Dog-Legs
Cumulative Fatigue Damage of Drill Pipe in Dog-Legs
Abstract
Rotating drill pipe passing through dog-legs suffers fatigue damage due to cyclic bending stresses. Curves of the cumulative fatigue damage incurred in e...
Clad Steel Pipe for Corrosive Gas Transportation
Clad Steel Pipe for Corrosive Gas Transportation
ABSTRACT
This paper describes the applicability and reliability Of clad steel pipe and its welds in sour gas environments in comparison with those of 22%Cr-5.5%Ni...
Preparation and Performance Evaluation of Erosion Resistant Lining of Bimetallic Composite Pipe
Preparation and Performance Evaluation of Erosion Resistant Lining of Bimetallic Composite Pipe
Abstract
Erosion widely exists in oil and gas production and transmission pipelines, which seriously affects the service life of pipelines. Ordinary carbon steel pip...
Pipe-in-Pipe Swaged Field Joint for Reel Lay
Pipe-in-Pipe Swaged Field Joint for Reel Lay
Abstract
Subsea 7 and ITP InTerPipe (ITP) have developed a highly efficient Pipe in Pipe technology to be installed by the Reel-Lay method. This solution is based...
HDPE Cooling Water Pipe for Power Generation
HDPE Cooling Water Pipe for Power Generation
Cooling water pipe systems are a critical part of a power generation plant. If the cooling water pipe fails, the whole plant may shut down. Due to its high tensile strength steel p...
Overtrawlability and Mechanical Damage of Pipe-in-Pipe
Overtrawlability and Mechanical Damage of Pipe-in-Pipe
A pipeline on the seabed may be struck by moving trawl gear, and that may damage the pipeline. Trenching can be a useful but expensive way to protect the pipeline. Pipe-in-pipe and...
Cool Beats and Timely Accents
Cool Beats and Timely Accents
Ever since I tripped over Tiddles while I was carrying a pile of discs into the studio, I’ve known it was possible to get a laugh out of gramophone records!Max Bygraves In 1978 t...