Javascript must be enabled to continue!
Synthesis and Characterization of 4‐Vinylimidazolium/Styrene‐Cografted Anion‐Conducting Electrolyte Membranes
View through CrossRef
AbstractThe β‐hydrogen‐free imidazole monomer, 2‐methyl‐N‐methyl‐4(5)‐vinylimidazole (2M4VIm), is synthesized to prepare anion exchange membranes (AEMs). The radiation‐induced graft polymerization of 2M4VIm and styrene is performed in poly(ethylene‐co‐tetrafluoroethylene), followed by N‐alkylation and ion exchange reactions to prepare 4‐vinylimidazolium‐containing AEM (2M4VIm/St‐AEM). AEMs that have a 6/4 2M4VIm/St molar ratio and 1.7 mmol g−1 ion exchange capacity (IEC) result in 75 mS cm−1 conductivity and 60% water uptake at room temperature in water, demonstrating enhanced values compared to previously reported 2‐methyl‐N‐vinylimidazolium‐containing AEMs (2MNVIm/St‐AEM) that have a similar comonomer ratio and IEC. The small‐angle neutron scattering measurements of dry and swollen 2M4VIm/St‐AEM reveal hydrophilic/hydrophobic two‐phase separation, as observed for 2MNVIm/St‐AEM with a similar Im/St composition. 2M4VIm/St‐AEMs exhibit higher alkaline stability in 1 m KOH at 80 °C at an early stage owing to the suppression of imidazolium β‐elimination but lower long‐term stability than that of 2MNVIm/St‐AEM due to the ring‐opening reaction of the imidazolium group due to its outward orientation from the graft main chain.
Title: Synthesis and Characterization of 4‐Vinylimidazolium/Styrene‐Cografted Anion‐Conducting Electrolyte Membranes
Description:
AbstractThe β‐hydrogen‐free imidazole monomer, 2‐methyl‐N‐methyl‐4(5)‐vinylimidazole (2M4VIm), is synthesized to prepare anion exchange membranes (AEMs).
The radiation‐induced graft polymerization of 2M4VIm and styrene is performed in poly(ethylene‐co‐tetrafluoroethylene), followed by N‐alkylation and ion exchange reactions to prepare 4‐vinylimidazolium‐containing AEM (2M4VIm/St‐AEM).
AEMs that have a 6/4 2M4VIm/St molar ratio and 1.
7 mmol g−1 ion exchange capacity (IEC) result in 75 mS cm−1 conductivity and 60% water uptake at room temperature in water, demonstrating enhanced values compared to previously reported 2‐methyl‐N‐vinylimidazolium‐containing AEMs (2MNVIm/St‐AEM) that have a similar comonomer ratio and IEC.
The small‐angle neutron scattering measurements of dry and swollen 2M4VIm/St‐AEM reveal hydrophilic/hydrophobic two‐phase separation, as observed for 2MNVIm/St‐AEM with a similar Im/St composition.
2M4VIm/St‐AEMs exhibit higher alkaline stability in 1 m KOH at 80 °C at an early stage owing to the suppression of imidazolium β‐elimination but lower long‐term stability than that of 2MNVIm/St‐AEM due to the ring‐opening reaction of the imidazolium group due to its outward orientation from the graft main chain.
Related Results
Evaluation of Capability of Some Amino Acid-based Poly (Ionic Liquid)s as Biocompatible Agent for Co2 Absorption
Evaluation of Capability of Some Amino Acid-based Poly (Ionic Liquid)s as Biocompatible Agent for Co2 Absorption
Abstract
In this study, seven amino acid-based poly(ionic liquid)s (AAPILs) such as poly(1-butyl-3-vinylimidazolium glycinate), P[VBIm][Gly], poly (1-butyl-3-vinylimidazoli...
Synthesis, Characterization, and Alkaline Stabilities of
p-(2-imidazoliumyl) Styrene-Grafted Anion-Conducting Electrolyte Membranes Prepared By Radiation-Induced Grafting for Fuel Cells
Synthesis, Characterization, and Alkaline Stabilities of
p-(2-imidazoliumyl) Styrene-Grafted Anion-Conducting Electrolyte Membranes Prepared By Radiation-Induced Grafting for Fuel Cells
Anion-conducting electrolyte membrane fuel cells (AEMFCs) have attracted considerable interest due to their significant advantages over proton-conducting electrolyte membrane fuel ...
Alkaline Durable Anion-Conducting Electrolyte Membranes Prepared by Radiation Induced Grafting of 2-Methyl-4-vinylimidazole for Non-Platinum Direct Hydrazine Hydrate Fuel Cells
Alkaline Durable Anion-Conducting Electrolyte Membranes Prepared by Radiation Induced Grafting of 2-Methyl-4-vinylimidazole for Non-Platinum Direct Hydrazine Hydrate Fuel Cells
We have been developing highly-conductive and alkaline-durable anion-conducting electrolyte membranes (AEMs) for a platinum-free fuel cell (FC) for liquid fuel (hydrated hydrazine)...
Use of Organic Solvent Nanofiltration (OSN) membranes for Counter-Current Chromatography (CCC) solvent recovery
Use of Organic Solvent Nanofiltration (OSN) membranes for Counter-Current Chromatography (CCC) solvent recovery
Solvent resistant membranes are a relatively new technology which has the potential to expand the possible utilities of membranes for process industries. Little is known in terms o...
(Invited) Operando EPR Study on Radicals in Anion-Exchange Membrane Fuel Cells
(Invited) Operando EPR Study on Radicals in Anion-Exchange Membrane Fuel Cells
In the rapidly developing modern society, there is an urgent need for the wide-ranging availability of advanced and eco-friendly energy sources. One of the possible alternatives is...
Profiled Ion-Exchange Membranes for Reverse and Conventional Electrodialysis
Profiled Ion-Exchange Membranes for Reverse and Conventional Electrodialysis
Profiled ion-exchange membranes are promising for improving the parameters of reverse electrodialysis due to the reduction of pumping power and electrical resistance. The smooth co...
Removal of Styrene from Waste Gas Using a Biological Trickling Filter
Removal of Styrene from Waste Gas Using a Biological Trickling Filter
AbstractBiodegradation of styrene in a biological trickling filter on lava stones was investigated, firstly, with the addition of silicon oil and, secondly, without the addition of...
(Invited) Polymer Electrolytes Based on Ionic Liquids for PEMFC and Lithium Batteries
(Invited) Polymer Electrolytes Based on Ionic Liquids for PEMFC and Lithium Batteries
Ionic liquids (IL) are considered as hi-tech new media with emerging applications as solvents for organic reactions or as electrolytes. The organization degree in these complex flu...

