Javascript must be enabled to continue!
Ice Class AUV Development
View through CrossRef
Abstract
C & C Technologies, Inc. of Lafayette, Louisiana is spearheading a technical research program to advance the state of the art regarding under ice Autonomous Underwater Vehicle (AUV) survey operations. This program, funded by Shell Offshore, Inc., focuses on five areas of research, which include:.Remote Stations for AUV Navigation and Communication,AUV Net Recovery,AUV Recovery by ROV,AUV Upward Looking Multibeam Sonar, andAUV Whale Avoidance.
Form factors for the remote stations were developed following the evaluation of the potential hardware components and an examination of AUV mission requirements. Analysis was performed to determine how best to utilize the remote stations to gain the maximum utility of an AUV under the ice. Two methods for facilitating the recovery of an AUV under ice were examined:recovery by a deployed net andrecovery by an ROV.
Net recovery research involved the construction of a full-scale prototype to deploy through a hole in the ice, extend, and capture the AUV. Research into ROV recovery under ice included developing a methodology to hold the AUV in place so it could be captured by the ROV. This involved the evaluation of several scenarios, which included securing the AUV to the sea floor with a drop anchor and making the AUV negatively buoyant with either a floodable ballast tank or by the release of syntactic foam. Research into the integration of an upward looking multibeam involved the analysis of currently available systems. A comparative analysis of power consumption, size, weight, and software interfacing of the potential candidate systems was performed. C & C collaborated with Kongsberg Maritime about the potential to enhance the HUGIN AUV's embedded obstacle avoidance system for whale avoidance. This paper provides details on each of these five areas of research and details the scope, methodology, findings, and resulting recommendations.
Concept
In 2009 Shell Offshore, Inc. entered into discussions with C & C Technologies, Inc. to evaluate the feasibility of applying AUV technology to Arctic mapping operations. The objective is to develop technology to allow operations within Shell lease blocks in the Beaufort and Chukchi Seas offshore Alaska during periods of ice cover. Capabilities would include the supply of positioning updates to the AUV while operating under the ice, communications with the AUV while under ice, retrieving the vehicle from under ice (both disabled and under direct control), mammal avoidance, and integration of upward looking sonar to measure ice thickness and study its morphology. These enabling technologies are not currently integrated into routine commercial AUV operations.
Remote Station Research
The purpose of remote stations is to reduce the risk of losing the AUV and to improve mission performance. Remote stations can provide AUV communications, positioning updates, command and control, or any combination thereof (Figure 1). The cost, complexity, and size of each remote station will vary depending upon the capabilities required.
The least sophisticated remote station is a "listen only" station. It would passively monitor AUV status acoustically broadcasted either automatically at regular intervals, only when interrogated, or in a combination. This remote station would have an Acoustic Data Link (ADL) to receive the AUV acoustic data, which would then be converted to RS-232 serial data. The serial data would be fed into a data telemetry radio and transmitted to the AUV Base of Operations.
Title: Ice Class AUV Development
Description:
Abstract
C & C Technologies, Inc.
of Lafayette, Louisiana is spearheading a technical research program to advance the state of the art regarding under ice Autonomous Underwater Vehicle (AUV) survey operations.
This program, funded by Shell Offshore, Inc.
, focuses on five areas of research, which include:.
Remote Stations for AUV Navigation and Communication,AUV Net Recovery,AUV Recovery by ROV,AUV Upward Looking Multibeam Sonar, andAUV Whale Avoidance.
Form factors for the remote stations were developed following the evaluation of the potential hardware components and an examination of AUV mission requirements.
Analysis was performed to determine how best to utilize the remote stations to gain the maximum utility of an AUV under the ice.
Two methods for facilitating the recovery of an AUV under ice were examined:recovery by a deployed net andrecovery by an ROV.
Net recovery research involved the construction of a full-scale prototype to deploy through a hole in the ice, extend, and capture the AUV.
Research into ROV recovery under ice included developing a methodology to hold the AUV in place so it could be captured by the ROV.
This involved the evaluation of several scenarios, which included securing the AUV to the sea floor with a drop anchor and making the AUV negatively buoyant with either a floodable ballast tank or by the release of syntactic foam.
Research into the integration of an upward looking multibeam involved the analysis of currently available systems.
A comparative analysis of power consumption, size, weight, and software interfacing of the potential candidate systems was performed.
C & C collaborated with Kongsberg Maritime about the potential to enhance the HUGIN AUV's embedded obstacle avoidance system for whale avoidance.
This paper provides details on each of these five areas of research and details the scope, methodology, findings, and resulting recommendations.
Concept
In 2009 Shell Offshore, Inc.
entered into discussions with C & C Technologies, Inc.
to evaluate the feasibility of applying AUV technology to Arctic mapping operations.
The objective is to develop technology to allow operations within Shell lease blocks in the Beaufort and Chukchi Seas offshore Alaska during periods of ice cover.
Capabilities would include the supply of positioning updates to the AUV while operating under the ice, communications with the AUV while under ice, retrieving the vehicle from under ice (both disabled and under direct control), mammal avoidance, and integration of upward looking sonar to measure ice thickness and study its morphology.
These enabling technologies are not currently integrated into routine commercial AUV operations.
Remote Station Research
The purpose of remote stations is to reduce the risk of losing the AUV and to improve mission performance.
Remote stations can provide AUV communications, positioning updates, command and control, or any combination thereof (Figure 1).
The cost, complexity, and size of each remote station will vary depending upon the capabilities required.
The least sophisticated remote station is a "listen only" station.
It would passively monitor AUV status acoustically broadcasted either automatically at regular intervals, only when interrogated, or in a combination.
This remote station would have an Acoustic Data Link (ADL) to receive the AUV acoustic data, which would then be converted to RS-232 serial data.
The serial data would be fed into a data telemetry radio and transmitted to the AUV Base of Operations.
Related Results
Thales GeoSolutions AUV Sensor Integration
Thales GeoSolutions AUV Sensor Integration
Abstract
Traditional AUV development has involved designing a vehicle, making it operational and then fitting available sensors to it. The Thales approach has bee...
AUV Applications Within E&P
AUV Applications Within E&P
Abstract
In February 1999 Shell examined the current state of AUV development and evaluated the usefulness of the technology for enhancing our ability to explore ...
Relationship Domain of Form Six Teachers Thinking in Teaching with External Factors of Form Six Teachers
Relationship Domain of Form Six Teachers Thinking in Teaching with External Factors of Form Six Teachers
<!--[if gte mso 9]><xml> <o:OfficeDocumentSettings> <o:RelyOnVML /> <o:AllowPNG /> </o:OfficeDocumentSettings> </xml><![endif]--> &l...
SPECIFICATION FOR TESTING AUTOMOTIVE MINIATURE BULBS
SPECIFICATION FOR TESTING AUTOMOTIVE MINIATURE BULBS
<div class="section abstract">
<div class="htmlview paragraph">The procedures contained in this specification cover the laboratory testing of miniature incandescent b...
Effect of ocean heat flux on Titan's topography and tectonic stresses
Effect of ocean heat flux on Titan's topography and tectonic stresses
INTRODUCTIONThe thermo-mechanical evolution of Titan's ice shell is primarily controlled by the mode of the heat transfer in the ice shell and the amount of heat coming from the oc...
Viscous relaxation of Pluto's ice shell below Sputnik Planitia
Viscous relaxation of Pluto's ice shell below Sputnik Planitia
AbstractThe surface of Pluto is dominated by the Sputnik Planitia basin, possibly caused by an impact ~ 4 Gyr ago. To explain basin's unlikely position close to tidal axis with Cha...
Introducing the AUUV: An Autonomous Underwater Utility Vehicle
Introducing the AUUV: An Autonomous Underwater Utility Vehicle
Abstract
The unprecedented partnership of Boeing, Fugro and Oceaneering has resulted in the development of an AUV incorporating many unique features. This paper i...
Grain growth of polycrystalline ice doped with soluble impurities
Grain growth of polycrystalline ice doped with soluble impurities
The grain size of polycrystalline ice affects key parameters related to planetary evolution such as the rheological and dielectric properties of Earth's glaciers and ice sheets as ...

