Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Anisotropic turbulent diffusivities and rotating magnetoconvection problems

View through CrossRef
<p>Earth’s core Physics inspires the magnetoconvection models. Turbulent state of the core can increase the viscosity, the thermal diffusivity and also the magnetic diffusivity. The change of magnetic diffusivity is also called β-effect and it is important in dynamo mechanisms. Moreover, the turbulence suggests that the dynamics can be more complicated than it is usually presented. For instance, due to turbulence the diffusivity coefficients could be anisotropic as it was described in some recent studies, which stress how anisotropy in many cases facilitate convection and in other cases inhibits it. For example, if there is anisotropy some types of convection can occur also with very small values of Ekman numbers, which are usual for the Earth’s core. This is important because the convection can be the main cause of dynamo action. We present several rotating magnetoconvection models in horizontal plane layer with gravity and rotation axis in vertical direction and homogeneous magnetic field in horizontal direction. Different models correspond to different cases of anisotropic diffusivities. In other words, we consider several anisotropic models: one with anisotropy in all diffusivities and other models with various combinations of anisotropic and isotropic diffusivities. Comparisons with other former models (e.g. with isotropic case, <em>p</em>-case, partial anisotropy case when only magnetic diffusivity is isotropic, and <em>f</em>-case, full anisotropy case with all diffusivities anisotropic) are thoroughly performed. In all models we consider two distinct kinds of anisotropy, Stratification Anisotropy – SA, determined by direction of single gravity (buoyancy) force and Braginsky-Meytlis one – BM, determined by directions of magnetic field and rotation axis. All systems described by these models are prone to instabilities, so analysis in term of normal modes and search for preferred modes are very useful to study such systems. We focus our attention on stationary modes and SA anisotropies. Furthermore, we distinguish two sub-cases of SA anisotropy: atmospheric – Sa, if the diffusion in the vertical direction is greater than in the horizontal ones and oceanic – So, if opposite holds. In Sa (So) anisotropy the convection is in major cases facilitated (inhibited). This fact suggests that it is important to study Sa as well as So anisotropies in the Earth’s core. Our main results concern cases of anisotropic diffusivities, when preferred modes give new dynamics (unexpected in isotropic case) in the system in which geodynamo can work. </p>
Title: Anisotropic turbulent diffusivities and rotating magnetoconvection problems
Description:
<p>Earth’s core Physics inspires the magnetoconvection models.
Turbulent state of the core can increase the viscosity, the thermal diffusivity and also the magnetic diffusivity.
The change of magnetic diffusivity is also called β-effect and it is important in dynamo mechanisms.
Moreover, the turbulence suggests that the dynamics can be more complicated than it is usually presented.
For instance, due to turbulence the diffusivity coefficients could be anisotropic as it was described in some recent studies, which stress how anisotropy in many cases facilitate convection and in other cases inhibits it.
For example, if there is anisotropy some types of convection can occur also with very small values of Ekman numbers, which are usual for the Earth’s core.
This is important because the convection can be the main cause of dynamo action.
We present several rotating magnetoconvection models in horizontal plane layer with gravity and rotation axis in vertical direction and homogeneous magnetic field in horizontal direction.
Different models correspond to different cases of anisotropic diffusivities.
In other words, we consider several anisotropic models: one with anisotropy in all diffusivities and other models with various combinations of anisotropic and isotropic diffusivities.
Comparisons with other former models (e.
g.
with isotropic case, <em>p</em>-case, partial anisotropy case when only magnetic diffusivity is isotropic, and <em>f</em>-case, full anisotropy case with all diffusivities anisotropic) are thoroughly performed.
In all models we consider two distinct kinds of anisotropy, Stratification Anisotropy – SA, determined by direction of single gravity (buoyancy) force and Braginsky-Meytlis one – BM, determined by directions of magnetic field and rotation axis.
All systems described by these models are prone to instabilities, so analysis in term of normal modes and search for preferred modes are very useful to study such systems.
We focus our attention on stationary modes and SA anisotropies.
Furthermore, we distinguish two sub-cases of SA anisotropy: atmospheric – Sa, if the diffusion in the vertical direction is greater than in the horizontal ones and oceanic – So, if opposite holds.
In Sa (So) anisotropy the convection is in major cases facilitated (inhibited).
This fact suggests that it is important to study Sa as well as So anisotropies in the Earth’s core.
Our main results concern cases of anisotropic diffusivities, when preferred modes give new dynamics (unexpected in isotropic case) in the system in which geodynamo can work.
 </p>.

Related Results

Computational study of diffusivities in diamond Ge-Si alloys
Computational study of diffusivities in diamond Ge-Si alloys
A variety of diffusivities in Ge-Si alloys available in the literature were critically reviewed. On the basis of the critically reviewed literature data, the diffusion parame...
Model And Calculation of In-Situ Stresses In Anisotropic Formations
Model And Calculation of In-Situ Stresses In Anisotropic Formations
Abstract In-situ stress has great influence on wellbore stability, well trace controlling and hydraulic fracturing design, therefore its estimation is considerabl...
Study of response characteristics of cross-well induced polarization method in anisotropic media
Study of response characteristics of cross-well induced polarization method in anisotropic media
The borehole induced polarization method has been widely used in deep mineral exploration, oil and gas resource exploration, and water resource exploration because of its high effi...
Basic Analysis of Counter-Rotating Turbines
Basic Analysis of Counter-Rotating Turbines
A comprehensive basic analysis for various counter–rotating turbines is given with the blade element stage assumption. Similar to the classical analysis of common turbine stages, t...
Numerical Investigation on the Rotating Stall Characteristics in a Three-Blade Centrifugal Impeller
Numerical Investigation on the Rotating Stall Characteristics in a Three-Blade Centrifugal Impeller
When a pump operates in part-load conditions, it is apt to form flow separations and even stall cells at the blade surfaces. In some conditions, stall cells may circumferentially p...
Modeling of pressure spectra in a turbulent shear flow
Modeling of pressure spectra in a turbulent shear flow
Models of turbulent-turbulent and turbulent-shear contributions to pressure spectra in a turbulent shear flow are developed. The spectral model for the turbulent-shear contribution...
Turbulent models of shallow-water equations-based smoothed particle hydrodynamics
Turbulent models of shallow-water equations-based smoothed particle hydrodynamics
The depth-averaged models such as those based on the shallow water equations (SWEs) are commonly used to simulate the large-scale flows with engineering importance. The smoothed pa...
Evaluation of Turbulent Flux Parameterizations over a Continental Glacier on the Tibetan Plateau
Evaluation of Turbulent Flux Parameterizations over a Continental Glacier on the Tibetan Plateau
Abstract. A lack of observations of turbulent fluxes over continental glaciers limits our understanding of the mechanisms that control glacier variations and associated water resou...

Back to Top