Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Effects of Y–Ce on wear behaviours of silicide coatings
View through CrossRef
Pure silicide coatings and Y–Ce modified silicide coatings were prepared on Ti–6Al–4V alloy by pack cementation process. The coating structures as well as their wear behaviours were comparatively studied. The results showed that the pure silicide coating and Y–Ce modified silicide coating prepared at 1080°C for 4 h had similar coating structures, mainly consisting of a TiSi2 outer layer, a TiSi middle layer and a Ti5Si4 inner layer. However, the microhardness of the Y–Ce modified silicide coating was higher than that of the pure silicide coating. The wear tests demonstrated that the mass loss of the pure silicide coating was about two times larger than that of the Y–Ce modified silicide coating, indicating the beneficial effects of Y and Ce on the wear resistance of silicide coating.
Title: Effects of Y–Ce on wear behaviours of silicide coatings
Description:
Pure silicide coatings and Y–Ce modified silicide coatings were prepared on Ti–6Al–4V alloy by pack cementation process.
The coating structures as well as their wear behaviours were comparatively studied.
The results showed that the pure silicide coating and Y–Ce modified silicide coating prepared at 1080°C for 4 h had similar coating structures, mainly consisting of a TiSi2 outer layer, a TiSi middle layer and a Ti5Si4 inner layer.
However, the microhardness of the Y–Ce modified silicide coating was higher than that of the pure silicide coating.
The wear tests demonstrated that the mass loss of the pure silicide coating was about two times larger than that of the Y–Ce modified silicide coating, indicating the beneficial effects of Y and Ce on the wear resistance of silicide coating.
Related Results
Micro-Structures and High-Temperature Friction-Wear Performances of Laser Cladded Cr–Ni Coatings
Micro-Structures and High-Temperature Friction-Wear Performances of Laser Cladded Cr–Ni Coatings
Cr–Ni coatings with the mass ratios of 17% Cr–83% Ni, 20% Cr–80% Ni and 24% Cr–76% Ni were fabricated on H13 hot work mould steel using a laser cladding (LC). The surface–interface...
Wear-resistant Coatings on Aluminum Alloys
Wear-resistant Coatings on Aluminum Alloys
Aluminum alloys are widely used in industry. Recently, they are used as a replacement for steel for the manufacture of pulleys, gears, columns of hydraulic rotary transmissions of ...
Effects of different factors on the friction and wear mechanical properties of titanium alloy materials with cortical bones at near service conditions
Effects of different factors on the friction and wear mechanical properties of titanium alloy materials with cortical bones at near service conditions
Abstract
Artificial joint is one of the most effective methods to treat joint injuries. The service performance of artificial joints is gradually bad due to the wear of art...
Study on the Theory and Method of Combined Casing Wear Resistance in Deep & Ultra-Deep Well Drilling
Study on the Theory and Method of Combined Casing Wear Resistance in Deep & Ultra-Deep Well Drilling
Abstract
The high and steep structure of piedmont areas in Tarim oil field bring serious casing wear problem. Casing wear is one of the important reasons for the ...
Microstructure, Mechanical Properties, and Friction-Wear Mechanisms of NbMoTaWV Refractory High-Entropy Alloy Coatings Fabricated via Laser Cladding
Microstructure, Mechanical Properties, and Friction-Wear Mechanisms of NbMoTaWV Refractory High-Entropy Alloy Coatings Fabricated via Laser Cladding
In this study, NbMoTaWV RHEA coatings were fabricated via laser cladding, and X-ray diffraction (XRD), scanning electron microscopy equipped with energy-dispersive X-ray spectrosco...
Investigation of Post CHOPS Enhanced Oil Recovery of Alkali Metal Silicide Technology
Investigation of Post CHOPS Enhanced Oil Recovery of Alkali Metal Silicide Technology
Abstract
Alkali metal silicides have ability to enhance oil recovery in a variety of light, medium and heavy oil reservoirs. These chemicals, which include the silic...
Microstructure, tribological performances, and wear mechanisms of laser-cladded TiC-reinforced NiMo coatings under grease-lubrication condition
Microstructure, tribological performances, and wear mechanisms of laser-cladded TiC-reinforced NiMo coatings under grease-lubrication condition
Abstract
NiMo-5%TiC, NiMo-15%TiC, and NiMo-25%TiC coatings were prepared on GCr15 steel by laser cladding (LC). The microstructure and the ph...
PROTECTIVE ABILITY OF TIN-NICKEL COATINGS
PROTECTIVE ABILITY OF TIN-NICKEL COATINGS
The calculation of the corrosion current of the steel – plating allowed us to estimate the protective properties and the porosity of the Tin-Nickel coatings. Measured in 3% NaCl so...