Graphene Multi-Frequency Broadband and Ultra-Broadband Terahertz Absorber Based on Surface Plasmon Resonance

When surface plasmon resonance (SPR) occurs, the incident light is absorbed by the surface of the SPR structure, thus minimizing the intensity of the reflected light. Therefore, the SPR method is adopted in this paper to achieve perfect absorption of the absorbent. In this paper, we first propose a multi-frequency broadband absorber structure based on graphene SPR, which uses the continuous resonance of patterned graphene surface plasmon in the frequency spectrum to form a multi-frequency broadband absorption. In this simulation, a sandwich-stack structure was adopted, whereby the patterned graphene is situated on top of the SiO2 layer and the metal layer. The broad-band absorption bands of the absorber were obtained as 4.14–4.38 THz, 5.78–6.36 THz, and 7.87–8.66 THz through the analog simulation of finite-difference time-domain method (FDTD) solutions. Then, based on the multi-layer resonant unit structure, through the superposition and combination of absorbing units responding to different frequency bands, the perfect absorption of ultra-wideband is achieved. The data results illustrate that the total absorption bandwidth of the absorber is 2.26 THz, and the relative absorption bandwidth Bw is equal to 28.93%. The electric field in X-Y direction of the absorber in the perfect absorption band is analyzed, respectively, and the dynamic tunability of the absorber is studied. Finally, we studied whether the absorbing structure still has efficient absorption characteristics for the two polarization modes when the incident angle is changed from 0° to 70°. The structure model proposed has potential value for application in terahertz photoelectric detection, filtering, and electromagnetic shielding.