Fundamentals of Friction Welding

Abstract Friction welding (FRW) is a solid-state welding process in which the heat for welding is produced by the relative motion of the two interfaces being joined. This article describes two principal FRW methods: direct-drive welding and inertia-drive welding. The direct-drive FRW uses a motor running at constant speed to input energy to the weld. The inertia-drive FRW uses the energy stored in a flywheel to input energy to the weld. The article summarizes some of the metals that have been joined by FRW and discusses the metallurgical considerations that govern the properties of the resulting weld. It also presents a schematic illustration of the effect of welding parameters on the finished weld nugget obtained when similar metals are welded using inertia-drive FRW equipment.